ページ1に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO E420VL, E470VL, or E550VL television purchase. To get the most
out of your new VIZIO HDTV, read these instructions before making any adjustments, and retain them for
future reference. We hope you will experience many years of enjoyment from your new VIZIO HDTV High
Definition Television.
For assistance, call 877-MYVIZIO (877-698-4946) or e-mail us at www.VIZIO.com.
To purchase or inquir
ページ2に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Important Safety Instructions Your HDTV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following rules should be observed for the installation, use, and maintenance of your HDTV. Read the following safety instructions before operating your HDTV. Keep these instructions in a safe place for future reference. • To reduce the risk of e
ページ3に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual • The wall socket should be installed near your HDTV and easily accessible. • Only power of the marked voltage can be used for your HDTV. Any other voltage than the specified voltage may cause fire or electric shock • Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms. • Unplug your HDTV during a lightning storm or when it will not be used for long period of time. This
ページ4に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting struct
ページ5に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Advisory of the DTV Transition The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch, analog-only television sets that receive TV programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only br
ページ6に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Table of Contents Important Safety Instructions.....................................................................................................................2 Television Antenna Connection Protection ...............................................................................................4 Advisory of the DTV Transition..................................................................................................................5
ページ7に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Slideshow Mode...................................................................................................................................31 Repeat..................................................................................................................................................31 Sort By ............................................................................................................................................
ページ8に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Clear Memory (Factory Default) ..........................................................................................................45 Start Setup Wizard...............................................................................................................................45 CHAPTER 9 PROGRAMMING THE VIZIO UNIVERSAL REMOTE CONTROL.......................46 Using a Cable or Satellite Box Remote............................................
ページ9に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Opening the Package Your HDTV and its accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. After you have opened the carton, check that your HDTV is in good condition and that all of the contents are included. The glass surface can easily be scratched or broken, so handle your HDTV gently and never place your HDTV with the glass facing downwards on a surface witho
ページ10に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Chapter 1 Setting Up Your HDTV • Read this user manual carefully before installing your HDTV. • The power consumption of your HDTV is about 111W (E420VL); 134W (E470VL); 138W (E550VL) average. Use the included AC/DC power adapter. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be compromised. • Install your HDTV on a flat surface to avoid tipping. • For pr
ページ11に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Attaching the E420VL TV Stand Note: We strongly recommend that two people perform the setup and assembly due to the weight and size of the TV. Unpack the TV and stand base: 1. Remove the remote control, batteries, and power cord from the foam end caps. 2. Remove the two top foam end caps. 3. Remove the stand base from the packaging. 4. Remove the TV from the box and lay it face down on a clean, flat surface. Note: Make sure that the surface
ページ12に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Attaching the E470VL TV Stand Note: We strongly recommend that two people perform the setup and assembly due to the weight and size of the TV. Unpack the TV and stand base: 1. Remove the remote control, batteries, and power cord from the foam end caps. 2. Remove the two top foam end caps. 3. Remove the stand base from the packaging. 4. Remove the TV from the box and lay it face down on a clean, flat surface. Note: Make sure that the surface
ページ13に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Wall Mounting your HDTV Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow the instructions below. 1. Write down the serial number located on the back of your HDTV in the space provided on page 1 to have it handy if you need to call for support. 2. Remove the stand base and neck: a. Disconnect the cables from your HDTV. b. Place your HDTV face down on a soft, flat surface to prevent dam
ページ14に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Chapter 2 Basic Controls and Connections Front Panel 1. Remote Control Sensor—Point the remote control directly at this window on the lower left corner of your HDTV for the best response to the remote signal. 2. POWER ‘VIZIO’ LIGHT—The VIZIO name lights white when powered on and orange when powered off. Side Panel Controls POWER ( )—Turn your HDTV on by pressing the button once. Press the button again to turn your HDTV off.
ページ15に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Rear Panel Connections 1. HDMI 1—Connect digital video devices such as a DVD player or Set-Top Box through this all digital connector. There is an additional HDMI connector on the side. 2. HDMI 2 with L/R Audio—Connect another digital video device such as a DVD player or Set-Top Box through this all digital connector. For users who want to connect to a DVI enabled device, use a DVI-HDMI cable and connect the analog audio output of the device
ページ16に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Chapter 3 VIZIO Remote Control Installing the Batteries 1. Remove the battery cover. 2. Insert the batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. Precautionary Tips for Inserting the Batteries: • Do not mix new and old batteries. This may result in cracking or leakage that may cause a fire or lea
ページ17に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual E420VL Remote Control Buttons POWER ( )—Press to turn the TV on from the Standby mode. Press it again to return to the Standby mode. CEC-Supported Buttons: CEC needs to be set up and enabled for these buttons to work. See CEC on page 44 for more information. ● (Record)—Press to begin recording on your CEC-supported device. (Pause)—Press to pause playback on your CEC-supported device. ► (Play)—Press to start Playback on your CEC-supported d
ページ18に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual E470VL & E550VL Remote Control Buttons POWER ( )—Press to turn the TV on from the Standby mode. Press it again to return to the Standby mode. Device Buttons: • DVD—Press to select a DVD player that has been programmed to work with this remote. See page 46 to program your remote control. • AUDIO—Press to select a Home Theater System or Audio Amplifier that has been programmed to work with this remote. See page 46 to program your remote contro
ページ19に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual AV—Press to select the AV input. TV—Press to select the TV input. Number Button Pad—Press to select a channel or enter a password. INPUT—Press to cycle through the various devices connected to your TV (called Inputs). The inputs cycle in the following sequence: TV, AV, Comp, HDMI-1, HDMI-2, HDMI SIDE, RGB, and Media. After you have stepped through the entire sequence, you will return to the beginning. - (DASH)—Press to insert a dash between t
ページ20に含まれる内容の要旨
VIZIO E420VL / E470VL / E550VL User Manual Chapter 5 Using your HDTV for the first time Select Input Source Select the input source for your HDTV by pressing the INPUT button on the remote control or the side of your TV. Pressing this button will cycle you through the following options: TV, AV, Comp, HDMI-1, HDMI-2, HDMI SIDE, RGB, and Media. Turn on your device and you will see a picture on your HDTV. If there is no picture, make sure you have selected the correct input on your HD
