ページ1に含まれる内容の要旨
VIZIO E420VO User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO E420VO television purchase. To get the most out of your new VIZIO
HDTV, read these instructions before making any adjustments, and retain them for future reference. We
hope you will experience many years of enjoyment from your new VIZIO HDTV High Definition Television.
For assistance, call 877-MYVIZIO (877-698-4946) or e-mail us at www.VIZIO.com.
To purchase or inquire about accessories and installation s
ページ2に含まれる内容の要旨
VIZIO E420VO User Manual Important Safety Instructions Your HDTV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following rules should be observed for the installation, use, and maintenance of your HDTV. Read the following safety instructions before operating your HDTV. Keep these instructions in a safe place for future reference. To reduce the risk of electric shock or com
ページ3に含まれる内容の要旨
VIZIO E420VO User Manual The wall socket should be installed near your HDTV and easily accessible. Only power of the marked voltage can be used for your HDTV. Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms. Unplug your HDTV during a lightning storm or when it will not be used for long period of time. This will protect your HDT
ページ4に含まれる内容の要旨
VIZIO E420VO User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of th
ページ5に含まれる内容の要旨
VIZIO E420VO User Manual Advisory of the DTV Transition The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch, analog-only television sets that receive TV programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasting. Analog-on
ページ6に含まれる内容の要旨
VIZIO E420VO User Manual Table of Contents Important Safety Instructions.....................................................................................................................2 Television Antenna Connection Protection ...............................................................................................4 Advisory of the DTV Transition..................................................................................................................5 CHAPTER 1 SETTING UP
ページ7に含まれる内容の要旨
VIZIO E420VO User Manual Adjusting Photo Settings .........................................................................................................................29 Slideshow Mode...................................................................................................................................29 Repeat..................................................................................................................................................29 Sort By ...........
ページ8に含まれる内容の要旨
VIZIO E420VO User Manual Help Menu ...............................................................................................................................................42 System Info ..........................................................................................................................................42 Reset TV Settings................................................................................................................................42 Clear Memory (
ページ9に含まれる内容の要旨
VIZIO E420VO User Manual Opening the Package Your HDTV and its accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. After you have opened the carton, check that your HDTV is in good condition and that all of the contents are included. The screen can easily be scratched or broken, so handle your HDTV gently and never place your HDTV with the glass facing downwards on a surface without protective padding. I
ページ10に含まれる内容の要旨
VIZIO E420VO User Manual Chapter 1 Setting Up Your HDTV Read this user manual carefully before installing your HDTV. The power consumption of your HDTV is about 86W average. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be compromised. Install your HDTV on a flat surface to avoid tipping. For proper ventilation, you must allow a 1” space between the back of your HDTV and the wall. Avoid
ページ11に含まれる内容の要旨
VIZIO E420VO User Manual Attaching the TV Stand Note: We strongly recommend that two people perform the setup and assembly due to the weight and size of the TV. Unpack the TV and stand base: 1. Remove the remote control, batteries, and power cord from the foam end caps. 2. Remove the two top foam end caps. 3. Remove the stand base from the packaging. 4. Remove the TV from the box and lay it face down on a clean, padded, flat surface. Note: Make sure that the surface is free of debris t
ページ12に含まれる内容の要旨
VIZIO E420VO User Manual Wall Mounting your HDTV Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow the instructions below. 1. Write down the serial number located on the back of your HDTV in the space provided on page 1 to have it handy if you need to call for support. 2. Remove the stand base and neck: a. Disconnect the cables from your HDTV. b. Place your HDTV face down on a soft, flat surface to prevent damage to the screen.
ページ13に含まれる内容の要旨
VIZIO E420VO User Manual Chapter 2 Basic Controls and Connections Front Panel 1. Remote Control Sensor—Point the remote control directly at this window on the lower left corner of your HDTV for the best response to the remote signal. 2. POWER ‘VIZIO’ LIGHT—The VIZIO name lights white when powered on and orange when powered off. Side Panel Controls POWER ( )—Turn your HDTV on by pressing the button once. Press the button again to turn your HDTV off. MENU—Press to open o
ページ14に含まれる内容の要旨
VIZIO E420VO User Manual Rear Panel Connections 1. HDMI 1—Connect digital video devices such as a DVD player or Set-Top Box through this all digital connector. 2. HDMI 2 with L/R Audio—Connect another digital video device such as a DVD player or Set-Top Box through this all digital connector. For users who want to connect to a DVI enabled device, use a DVI-HDMI cable and connect the analog audio output of the device to the L / R AUDIO here. Your VIZIO Certified HDMI-DVI cables are ava
ページ15に含まれる内容の要旨
VIZIO E420VO User Manual Chapter 3 VIZIO Remote Control Installing the Batteries 1. Remove the battery cover. 2. Insert the batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. Precautionary Tips for Inserting the Batteries: Do not mix new and old batteries. This may result in cracking or leakage that may cause a fire or lead to personal injury
ページ16に含まれる内容の要旨
VIZIO E420VO User Manual Remote Control Buttons POWER ( )—Press to turn the TV on from the Standby mode. Press it again to return to the Standby mode. CEC-Supported Buttons: CEC needs to be set up and enabled for these buttons to work. See CEC on page 40 for more information. ● (Record)—Press to begin recording on your CEC-supported device. (Pause)—Press to pause playback on your CEC-supported device. ► (Play)—Press to start Playback on your CEC-supported device. ■ (Stop)—Press to st
ページ17に含まれる内容の要旨
VIZIO E420VO User Manual Chapter 4 Getting Started Your HDTV has a built-in setup App that runs when you turn on your TV for the first time. Follow the on- screen directions to easily setup your new HDTV. 1. Insert the batteries into the remote control. 2. Connect the power cord to the power cord connector on the back of your HDTV, and then plug the power cord into an AC wall socket. 3. Connect your devices to your HDTV (see Chapter 6 for detailed steps). 4. Turn on your TV. The Setup A
ページ18に含まれる内容の要旨
VIZIO E420VO User Manual Chapter 5 Using your HDTV for the first time Select Input Source Select the input source for your HDTV by pressing the INPUT button on the remote control or the side of your TV. Pressing this button will cycle you through the following options: TV, AV, Comp, RGB, HDMI-1, HDMI-2, and Media. Turn on your device and you will see a picture on your HDTV. If there is no picture, make sure you have selected the correct input on your HDTV. Note: If the selected de
ページ19に含まれる内容の要旨
VIZIO E420VO User Manual Viewing Digital TV Program Information When the channel is changed or when you press the GUIDE button, an information header is shown over the picture for a few seconds. Each press of the GUIDE button will display more information about the program: Version 3/16/2010 19 www.VIZIO.com
ページ20に含まれる内容の要旨
VIZIO E420VO User Manual Chapter 6 Connecting Equipment Which Video Connection Should I Use? You have six options for connecting your video equipment box to your HDTV from a basic connection to the most advanced for digital displays. Based on your Home Theater configuration, you can decide which option is the right one for you. Connection Connector Description Quality (type) HDMI delivers the best image quality of any of the signal types available Best and it’s all done over one cabl
