ページ1に含まれる内容の要旨
™
EDGE LIT RAZOR LED LCD HDTV
E370VP / E420VP - user manual
ページ2に含まれる内容の要旨
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. ® HDMI, the HDMI logo and High-Definition Multimedia SRS StudioSound HD is a trademark of SRS Labs, Inc. Manufactured under license from Dolby Laboratories. StudioSound HD techn
ページ3に含まれる内容の要旨
Welcome Thank You for Choosing VIZIO My Product Information And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts. Product Registration To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at
ページ4に含まれる内容の要旨
E370VP / E420VP to rain or moistur e, does not operate normally or has been dr opped. Important Safety Instructions • Unplug the power cor d befor e cleaning your TV . Your TV is designed and manufactured to operate within defined design limits. • When moving your TV fr om an ar ea of low temperatur e to an ar ea of Misuse may result in electric shock or fire. To prevent your TV from being high temperatur e, condensation may form in the housing. W ait befor e damaged, the following in
ページ5に含まれる内容の要旨
E370VP / E420VP • Do not overload power strips and extension cor ds. Overloading can cause the batteries to leak which can damage the r emote contr ol or r esult in fir e or electric shock. injur e the operator . Do not expose batteries to excessive heat such as sunshine, fir e or the like. • The wall socket should be installed near your TV and easily accessible. • If any of the following occurs, contact the dealer: • Only power of the marked voltage can be used for your TV . Any oth
ページ6に含まれる内容の要旨
E370VP / E420VP Television Antenna Connection Protection DTV Transition Advisory If an outside antenna/satellite dish or cable system is to be connected to the TV, The nationwide switch to digital television broadcasting was complete on June make sure that the antenna or cable system is electrically grounded to provide 12, 2009. Analog-only television sets that receive TV programming through an some protection against voltage surges and static charges. antenna now need a converter box to con
ページ7に含まれる内容の要旨
Table of Contents Adjusting the Advanced Audio Settings .............................................. 17 Installing the TV .......................................................................1 Resetting the Audio Settings ............................................................... 17 Inspecting the Package Contents ........................................................... 1 Changing the TV Settings ....................................................................... 18 Installing
ページ8に含まれる内容の要旨
E370VP / E420VP Adjusting the Photo Viewer Settings ....................................................... 28 Troubleshooting & Technical Support........................................30 The TV displays “No Signal.” ............................................................... 30 There is no power. ................................................................................ 30 The power is on, but there is no image on the screen. ........................ 30 There is no sound. .........
ページ9に含まれる内容の要旨
Installing the TV 1 Inspecting the Package Contents Installing the TV Before installing your new TV, take a moment to inspect the package contents. After removing the TV from the box and inspecting the package contents you can Use the images below to ensure nothing is missing or damaged. begin installing the TV. Your TV can be installed in two ways: When you have completed your inspection, install the TV. • On a flat surface, using the included stand • On a wall, using a VESA-standar d wall m
ページ10に含まれる内容の要旨
E370VP / E420VP 1 3. Using a Phillips-head screwdriver, Be sure the mount you choose is capable of supporting the weight of the TV. After attach the base to the TV by inserting you have determined that you have the correct mount for your TV, you can begin and tightening the included screws. the installation. To install your TV on a wall: 1. Disconnect any cables connected to your TV. 4. Attach the plastic cover. 2. Place the TV face-down on a clean, flat, stab
ページ11に含まれる内容の要旨
Controls and Connections 2 Rear Panel Inputs PC Audio In: Connect 3.5mm connector from computer. RGB PC: Connect RGB cable from computer. Component: Connect component video/audio device. Composite AV: (Shared with Component) Connect composite video/ audio device. Use the ports labeled Y/V, L, and R. USB Cable/Antenna: Connect RF/Coaxial connector from cable, antenna, or satellite box. Optical Audio Out: Connect SPDIF/Optical audio cable. RCA Audio Out: Connect RCA audio device (soundbar, ho
ページ12に含まれる内容の要旨
E370VP / E420VP 2 Rear Panel Buttons Front Panel Power Menu Channel Up Channel Down Volume Up Remote Control Volume Down Sensor Input Front Panel Remote Control Sensor: When using the remote, point it directly at this sensor. Rear Panel Buttons Power: Turn the TV on or off. Menu: Display on-screen menu. Channel Up/Down: Change the channel. Volume Up/Down: Increase or decrease the loudness of the TVs audio. Input: Change the input device. 4
ページ13に含まれる内容の要旨
E370VP / E420VP 2 Remote Control Power/Standby: Turn the TV on or off. Input: Change the input device. A/V Controls: Control external device (CEC-enabled devices only). Info: Display the Info Window. CC: Open the Closed Captioning menu. Menu: Display the on-screen menu. Input Power/Standby Exit: Close the on-screen menu. A/V Controls Arrow: Navigate the on-screen menu and episode guide. Info CC OK: Select highlighted menu option. Guide: Display the episode guide (digital channels only). Exit Me
ページ14に含まれる内容の要旨
E370VP / E420VP 2 Replacing the Batteries 1. Remove the battery cover. 2. Insert two AAA batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. • Use only good quality batteries. • Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury. • Dispose of old or dead batteries in accordance with loca
ページ15に含まれる内容の要旨
Connecting Your Devices 3 Your HDTV can be easily connected to an external device: Connecting Your Devices • DVD or Blu-Ray player Once you have determined the best available connection type on both your • Video game console device and the TV, ensure you have the corresponding cable. • Cable box To connect a device to the TV: • Exter nal antenna 1. Ensure both the TV and your device are off. • Or other device 2. Connect the device and the TV. Use the best available connection. See the Bef
ページ16に含まれる内容の要旨
E370VP / E420VP 3 Select one of the connection types. Use the cable(s) shown to connect the TV to your device. Select One: HDMI DIGITAL BEST OR RF/ DIGITAL / COAXIAL ANALOG OR RGB ANALOG BETTER OR COMPONENT ANALOG OR COMPOSITE ANALOG AV GOOD Device Connection Chart 8
ページ17に含まれる内容の要旨
Completing the First-Time Setup 4 The first time you turn on the TV, the Setup App will guide you through each of the 4. Use the Up/Down Arrow buttons on steps necessary to get your TV ready for use. the remote to highlight your time zone and press OK. Before you begin the first-time setup: • Y our TV should be installed and the power cor d should be connected to an electrical outlet. See Installing the TV on page 1. • Y our devices should be connected. See Connecting Y our Dev
ページ18に含まれる内容の要旨
Using the On-Screen Menu 5 Your TV features an easy-to-use on-screen menu. Changing the Input Source To open the on-screen menu, press the MENU button on the remote. External devices such as DVD players, Blu-Ray Players, and video game consoles can be connected to your TV. To use one of these devices with your TV, you must From this menu, you can: first change the input source in the on-screen menu. • Change the input sour ce • Change the scr een aspect radio To open the Input menu quickly,
ページ19に含まれる内容の要旨
E370VP / E420VP 5 Setting the Screen Aspect Ratio The TV can display images in five different modes: Normal, Wide, Zoom, Panoramic, Use the table below to determine the best aspect ratio for your content type. and Stretch. Each mode displays content according to the content’s original format. Areas in red will not be visible on your TV screen. Original Content Format 480p/480i (4:3) 720p (16:9) 1080p/1080i (16:9) RGB (4:3) RGB (16:9) Normal Wide Zoom Panoramic Str etch 11
ページ20に含まれる内容の要旨
E370VP / E420VP 5 Changing the Screen Aspect Ratio Setting Up Closed Captioning The TV can display images in four different modes: Normal, Wide, Zoom, and Panoramic. Each mode displays the picture differently. Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. To change the screen aspect ratio: If the program you are viewing is not being broadcast with closed 1. Press the MENU button on the remote. captions, the
