Ford M-6007-F50の取扱説明書

ページ1に含まれる内容の要旨

M-6007-F50
Long Block Engine Assembly
INSTRUCTIONS SHEET

NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF

FORD RACING PERFORMANCE PARTS

Please contact the Tech “Hot Line” for the most current instruction information (586) 468-1356

! ! ! READ ALL INSTRUCTIONS PRIOR TO INSTALLING ENGINE ASSEMBLY ! ! !


PARTS INCLUDED:

1986-93 5.0L HO Mustang Production Engine Assembly


GENERAL INFORMATION:

This engine assembly is built with th

ページ2に含まれる内容の要旨

M-6007-F50 Long Block Engine Assembly INSTRUCTIONS SHEET NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD RACING PERFORMANCE PARTS 5.0L H.O. SPECIFICATIONS Displacement: 302 CID Bore: 4.0" Stroke: 3.0" Nominal Compression Ratio 9.0:1 Deck Height: 8.206" Piston to Deck: .0075" below - .0135" above Camshaft: Hydraulic Roller (1995 Mustang Production) (3) Maximum Valve Lift .444" Duration adv. 276I/266E Center

ページ3に含まれる内容の要旨

M-6007-F50 Long Block Engine Assembly INSTRUCTIONS SHEET NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD RACING PERFORMANCE PARTS ! ! ! IMPORTANT INFORMATION ! ! ! READ THIS PAGE BEFORE YOU START THE LONG BLOCK INSTALLATION PROCEDURES. DO NOT USE PILOT SHAFT BEARING WITH AN AUTOMATIC TRANSMISSION. THE PILOT SHAFT BEARING IS FOR MANUAL TRANSMISSION APPLICATIONS ONLY. THE PILOT SHAFT BEARING MUST BE INSTALLED WITH