ページ1に含まれる内容の要旨
N3260w/N3760w/N4060w
LCD
Model No. :
10847-1P / VS10848-1P / VS10846-1P
ページ2に含まれる内容の要旨
Contents Compliance Information .................................................................................. 1 Important Safety Instructions .......................................................................... 2 Copyright Information ...................................................................................... 3 Product Registration ........................................................................................ 3 Antenna Installation Instructions ...................
ページ3に含まれる内容の要旨
Compliance Information CE Conformity for European Countries In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors. AC Plug cord precautions for the United Kingdom For your safety please read the following text carefully. If the fitted moulded plug is unsuitable for the socket outlet then the plug should be cut off and
ページ4に含まれる内容の要旨
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this guide for further instructions. 7. D o not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 8. D o n
ページ5に含まれる内容の要旨
Copyright Information ® Copyright © ViewSonic Corporation, 2005. All rights reserved. ® ViewSonic , the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improv
ページ6に含まれる内容の要旨
Antenna Installation Instructions 1 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded to avoid voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS I /NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements f
ページ7に含まれる内容の要旨
Getting Started Congratulations on your purchase of a ViewSonic LCD TV display. Important! Save the original box and all packaging material for future shipping needs. Package Contents Please confirm that the following accessories are present when you unpack the box: LCD TV Remote Control (batteries included) Power Cable AV Cable Color Quick Start Guide User Guide Non-Grounded AC Power Adapter for United Kingdom Non-Grounded AC Power Adapter for Continental Europe 5 Vi
ページ8に含まれる内容の要旨
Front View of the Product 1 2 3 4 5 ViewSonic ............................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................. . . .
ページ9に含まれる内容の要旨
Rear View of the Product 1 S / AV - IN Connects to the audio and S-Video or AV output jack of your A/V device. 2 HDTV 1 / HDTV 2 Connects to the audio and component video output jacks of your A/V device. 3 A/V OUT Decodes the signal input via AV-IN and outputs from VIDEO OUT to display another image on second TV. 4 HDMI ANALOG AUDIO - IN Connects to the HDMI audio output of your PC or A/V device. 5 PC Audio - IN Connects to the audio output (earphone jack) of your PC or portable computer.
ページ10に含まれる内容の要旨
Remote Control 1 POWER Turns power on or off. 2 DISPLAY Press repeatedly to display current time, channel number, or video input signal. 3 SLEEP Press repeatedly to set the off timer to 15 through 120 minutes. The TV enters stand-by mode after the specified time interval. 4 CH Increases or decreases the channel number. 5 VOL – / + Increases (+) or decreases (–) the volume. 6 RECALL Switches to
ページ11に含まれる内容の要旨
7 TELETEXT HOT KEYS Select groups of pages in teletext mode.(Europe Only) 8 INDEX Displays a list and information about the teletext pages. 9 SUB PAGE Displays the teletext as an overlay over the programme you are currently watching. 10 ZOOM / HOLD Zoom enlarges the teletext page; Hold freezes the current teletext page on the screen. 11 EXIT Press the button to exit the present menu. 12 ARROW KEYS Press the up, down, left, right arrow keys to scroll through the OSD menu options. 13 MENU Di
ページ12に含まれる内容の要旨
21 PIP CH Switches the channel of sub picture. 22 TELETEXT Starts teletext mode. 23 - / - - Press button to choose a channel number higher than 100. 24 NUMBER KEYS Press the number keys to enter channel numbers. 25 VIDEO MODE Switches between four video modes to change the picture quality: Custom, Vivid, Mild, Standard. 26 AUDIO MODE Switches between four audio modes to change the sound quality: Custom, LIVE, POP, ROCK. 27 SOURCES Selects the TV,AV,PC/HDMI inputs as the video source sign
ページ13に含まれる内容の要旨
Remote Control Battery Installation Follow the steps below to insert the batteries. 1 Open the remote control’s rear battery compartment cover. 2 Insert two AAA batteries. Ensure that the positive and negative ends match as indicated on the bottom of the battery compartment. 3 Replace the battery compartment cover. 1 2 3 CAUTION Only use the specified AAA batteries. Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to person
ページ14に含まれる内容の要旨
Cable Connections Attach video and audio cables according to the connections on your external devices such as DVDs, VCR’s, stereo systems. AV OUT Video IN Audio OUT Video OUT S-VIDEO S-VIDEO R L R L VIDEO Cr Cb Y L R Cr Cb Y *Using a DVI to HDMI cable with an RCA cable is necessary to adjust HDMI AUDIO settings in the OSD (see page 15). Power Cable Connection 1 Connect the power cable to a wall socket. 2 Connect the other end to the socket on the back of the LCD. Wall outlet AC IN Pow
ページ15に含まれる内容の要旨
OSD Functions All the functions for the LCD TV are controlled either by the remote control or the control buttons on the right hand side of the TV. See “Front View of the Product” on page6. Press the MENU button on the remote control or the control button on the right hand side of TV to display the OSD main menu. Video Picture Mode C ustom Ti Press the MENU button to select the OSD menu you want. Press the CH / or the / buttons to select an OSD menu item. Press the VOL +/– o
ページ16に含まれる内容の要旨
Image Adjustment Video Function Name Explanation Function Name Explanation Picture Mode Adjusts the levels of light on your screen. Contrast Adjusts the difference between the dark and light levels on your display. It should be used in conjunction with the Brightness option. Brightness Adjusts the levels of light on your screen. It should be used in conjunction with the Contrast option. Adjusts the colour levels to fit your own favorite. Colour Tint Changes the colo
ページ17に含まれる内容の要旨
Audio Adjustment Audio Explanation Function Name Function Name Explanation Volume Adjusts the overall volume of the speakers. Balance Balance the volume of the left and right speakers. Equalizer Press / button to switch sonics : POP, LIVE, ROCK and CUSTOM. Treble Adjusts the high frequency content in the audio output. Bass Adjusts the low frequency content in the audio output. Sound Mode Selects the audio mode for your LCD TV. In many locations, you can listen to a secondary audio sourc
ページ18に含まれる内容の要旨
Screen Adjustment Screen Display Mode Wide Screen H Size 50 H Position 50 V Position 50 Phase 0 Default Auto Sync Off Cold Color Temperature Select Adjustment Exit Function Name Function Name Explanation Explanation Display Mode Adjusts the size of the display mode. H Size Adjusts the size of horizonal. (PC Only) H Position Adjusts the horizontal position of the display. (PC Only) V Position Adjusts the vertical position of the display. (PC Only) Phase Adjusts the pha
ページ19に含まれる内容の要旨
Setup Adjustment Setup Tuning Edit Program Table Edit Auto Search Edit Select Adjustment Exit Function Name Explanation Function Name Explanation Tuning Enables you to modify, add, or delete channels from the available channels and set the channel hotkey or the Channel data for your own habit. Program Table Name the channel you choose. (Only can type in English.) Auto Search Automatically scans for available channels. Setup Tuning Program No. Air Fine Tuning 10 C
ページ20に含まれる内容の要旨
Setup Program Table 001 AAAAA 002 BBBBB 003 CCCCC 004 DDDDD 005 EEEEE 006 FFFFF 007 008 009 010 R : Del; G : Copy; Y : Name; C : Swap MENU : OK Select Adjustment Exit In this page, you can name the channel you choose. Press / to select the channel number and press Y buttonto name the channel. You need enter at least 1 letter. Setup Auto Search Country Auto Start AutoSearch Start Select Adjustment Exit In this page, you can choos
