ページ1に含まれる内容の要旨
17/19-INCH PREMIUM
TFT-LCD MONITOR
INSTRUCTION MANUAL
17RTC / 19RTC
INSTRUCTION MANUAL
Please read this manual thoroughly before use, and keep it handy for future reference.
ページ2に含まれる内容の要旨
SAFETY INSTRUCTION…………………………………………………………………….2 - 3 CAUTIONS ………………………………………..……………………………………………..4 FCC RF INTERFERENCE STATEMENT …………………………………………………….5 CONNECTING WITH EXTERNAL EQUIPMENT…………………………………………… 6 REMOTE FUNCTIONS ……………………………………………………………………….. 7 CONTROLS AND FUNCTIONS…………………………………………………………..8 - 26 MOUNTING GUIDE …………………………………………………………….……..…….. 27 D-SUB CONNECTOR PIN ASSIGNMENTS ……………………………………………….28 POWER MANAGEMENT……………………………………………………………………..29 SPECIFICATIONS……………………………………
ページ3に含まれる内容の要旨
1. Read all of these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use this product near water. 6. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. 7. Slots and openings in the cabinet and the
ページ4に含まれる内容の要旨
Refer all servicing to service personnel. 14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the Product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions sin
ページ5に含まれる内容の要旨
▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. ▶ DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases. ▶ KEEP IN A WELL VENTILATED PLACE Ventilation holes are provided on the cabinet to prevent the temperature from rising. Do not cover the unit or pl
ページ6に含まれる内容の要旨
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that in
ページ7に含まれる内容の要旨
A. BOTTOM PANEL CONTROL 1 7 6 5 4 3 2 1. DC 12V IN 2. COMPONENT Y,Pb,Pr & SOUND L,R IN 3. AUDIO OUT 4. PC STEREO IN 5. D-SUB IN 6. DVI IN 7. HDMI IN (OPTION) B. SIDE PANEL CONTROL 1 1. VIDEO 1(AV1) IN 2. VIDEO 1(AV1) OUT 2 3. VIDEO 2(AV2) IN 3 4. VIDEO 2(AV2) OUT 4 5. S-VIDEO (Y/C) IN 5 6. S-VIDEO (Y/C) OUT 6 7. AV1, S-VIDEO AUDIO IN 7 8 8. AV1, S-VIDEO AUDIO OUT 9 10 9. AV2 AUDIO IN 10. AV2 AUDIO OUT 11. DC12V ADAPTOR 11 INSTRUCTION MANUAL………………
ページ8に含まれる内容の要旨
C. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( AV1 / AV2 / S-Video / PC ) sources. 9. AUTO Auto geometry adjustment in PC Source. 10. MUTE Mute the sound. 11. MENU Activates and exits the On Screen Display. 12. EXIT Exit the On Screen Display. 13. VOL( ) Increases or decreases the level of audio volume. 14. UP/DOWN Move to OSD menu. 15. ENTER Accepts your selection or dis
ページ9に含まれる内容の要旨
D. FRONT KEY CONTROL 7 6 5 4 3 2 1 1. POWER ON/OFF( ) 9 8 Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. MENU / EXIT Activates and exits the On Screen Display. 3. SOURCE/SELECT Select PC or video source. Select On Screen Display menu 4 / 5. ▼ / ▲ This button allows user to enter the sub-menu of the activated function 6 / 7. ◀▶ VOL Adjust the volume / Adjust menu settings. 8. IR Sensor Remote controller sen
ページ10に含まれる内容の要旨
OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video mode) Press the MENU button and then up(▲) / down(▼) button to select the Custom menu. Press the up(▲) / down(▼) button to select Custom sub menu. Press the left(◀) /right(▶) button to adjust picture setting. Press the MENU button to save. Brightness: Increase or decrease the intensity of the image. Contrast: Increase or decrease the intensity (lightness or dimness) of the image. Color: Increase
ページ11に含まれる内容の要旨
A: CUSTOM MENU (Only PC mode) Press the MENU button and then up(▲) / down(▼) button to select the Custom menu. Press the up(▲) / down(▼) button to select Custom sub menu. Press (◀) /right(▶) button to adjust picture setting. Press the MENU button to save. INSTRUCTION MANUAL…………………………………………………………………………… 10
ページ12に含まれる内容の要旨
B. Picture / Sound Menu(Only Video mode) Press the MENU button and then up(▲) / down(▼) button to select the Picture / Sound. Press the right(▶) or ENTER button. 1. Picture Mode Press the up(▲) / down(▼) button to select the Picture Mode. Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Picture Mode. Press the MENU button to save. 11 …………………………………………………………………………… INSTRUCTION MANUAL
ページ13に含まれる内容の要旨
2. Color Tone Press the up(▲) / down(▼) button to select the Color Tone. Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired color tone. Press the MENU button to save. INSTRUCTION MANUAL…………………………………………………………………………… 12
ページ14に含まれる内容の要旨
3. Mute Press the up(▲) / down(▼) button to select the Mute. Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired Mute. Press the MENU button to save. 13 …………………………………………………………………………… INSTRUCTION MANUAL
ページ15に含まれる内容の要旨
4. Volume Press the up(▲) / down(▼) button to select the Volume. Press (◀) /right(▶) button to adjust Volume. Press the MENU button to save. 5. Size Press the up(▲) / down(▼) button to select the Size. INSTRUCTION MANUAL………………………………………………………………………………14
ページ16に含まれる内容の要旨
Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired Size. Press the MENU button to save. 6. PC (Only PC mode) Press the up(▲) / down(▼) button to select the PC Press the ▶ or ENTER button 15 …………………………………………………………………………… INSTRUCTION MANUAL
ページ17に含まれる内容の要旨
Press the up(▲) / down(▼) button to select PC sub menu Press the right(▶) or ENTER button and then left (◀) /right(▶) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elements. H. position: Move image horizontally on screen right or left. V. position: Move image vertically on screen up or down. Frequency: Adjust the vertical noise of screen image. C. PIP MENU
ページ18に含まれる内容の要旨
1. PIP Press the up(▲) / down(▼) button to select the PIP. Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the On or Off. Press the MENU button to save. 2. Input Source Press the up(▲) / down(▼) button to select the Input Source. 17 …………………………………………………………………………… INSTRUCTION MANUAL
ページ19に含まれる内容の要旨
Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Input Source. Press the MENU button to save. 3. Size Press the up(▲) / down(▼) button to select the Size. INSTRUCTION MANUAL………………………………………………………………………………18
ページ20に含まれる内容の要旨
Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Size. Press the MENU button to save. 4. Position Press the up(▲) / down(▼) button to select the Position. 19 …………………………………………………………………………… INSTRUCTION MANUAL
