Edelbrock Yamaha YFZ450の取扱説明書

ページ1に含まれる内容の要旨

Twist Throttle Instructions
INSTRUCTION SUPPLEMENT FOR 2004-

LATER YAMAHA YFZ450
1. Install the throttle cables into the supplied

throttle housing and place onto clean

handlebar end.


Removing stock carburetor and cables.
2. Route throttle cables through frame as stock

cable was routed.





3. Install the pull cable into the 8:00 position
1. Remove seat and gas tank. Make sure fuel
and the return cable end into the 11:00
petcock is in “off” position.
position of

ページ2に含まれる内容の要旨

closing throttle to ensure smooth operation. Also check to make sure the cables do not catch or bind on anything, i.e., hand guards, stabilizers. 7. Install fuel tank and connect fuel line to petcock and secure with provided pinch clamp. Do not bolt tank in place, as minor adjustments may be necessary and my be easier with the tank off. 8. Turn fuel petcock to “on” and check for leaks. Material will need to be removed on the 9. Open throttle 3-5 times to prime acce