ページ1に含まれる内容の要旨
Owner’s Manual
Integrated High Definition
LCD Television
HIGH-DEFINITION TELEVISION
26AV502U
32AV502U
32AV50SU
37AV502U
Owner’s Record
The model number and serial number are on the back
For an overview of steps for setting up your new TV, see page 9.
of your TV. Record these numbers in the spaces below.
Note: To display a High Definition picture, the TV must be receiving
Refer to these numbers whenever you communicate
a High Definition signal (such as an over-the-air High Definition
with you
ページ2に含まれる内容の要旨
Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will CHILD SAFETY: help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and It Makes A Difference How and Where You Use Your Flat keep it nearby for future reference. Panel Display Congratulations on your purchase! As you enjoy your Safety Precautions new product, please keep these safety tips in mind: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTR
ページ3に含まれる内容の要旨
Important Safety Instructions 15) CAUTION: • To reduce the risk of electric shock, do not use the polarized 1) Read these instructions. plug with an extension cord, receptacle, or other outlet 2) Keep these instructions. unless the blades can be inserted completely to prevent 3) Heed all warnings. blade exposure. • To prevent electric shock, match wide blade of plug to wide 4) Follow all instructions. slot; fully insert. 5) Do not use this apparatus near water. 16) WARNING: 6) Cl
ページ4に含まれる内容の要旨
23) Always place the back of the television at least four (4) inches 31) WARNING: away from any vertical surface (such as a wall) to allow proper RISK OF ELECTRIC SHOCK! ventilation. Never spill liquids or push objects of any kind into the TV 24) Never allow anything to rest on or roll over the power cord, and cabinet slots. never place the TV where the power cord is subject to wear or 32) While it is thundering, do not touch the connecting cables or abuse. apparatus. 25) Never overload
ページ5に含まれる内容の要旨
6” TV Choosing a location for your LCD TV VESA Mounting Pattern To Display your LCD TV on the included Pedestal Stand: Observe the following safety precautions: 1) Readand F ollowthe pedestal assembly instructions included withthe pedestal. CAUTION: Before beginning pedestal assembly,carefully lay the front of the LCDP anel face down ona flat,cushioned surf ace such asa quiltor blank et. Leave the bottom ofthe unit protruding overthe edge of thesurf
ページ6に含まれる内容の要旨
® FCC Declaration of Conformity ENERGY STAR User Information Compliance Statement ENERGY STAR UserInformation Statement: the factory default settingsof this television meet ENERGY STAR requirements. (Part 15): Changing Picture Settingsmay increaseener gy consumption, possibly beyond the limits required for ENERGY STAR The Toshiba 6AV0U, AV0U, AV0SU, and 7AV0U qualification. Televisions complywith P art15 ofthe FCC rules. To ensureyour television is ope
ページ7に含まれる内容の要旨
Contents ® Scrollingthe TheaterWide picture Important Safety Instructions .......................................... (TheaterWide 2 and 3 only) ............................................40 Installation, Care, and Service ........................................ Usingthe auto aspectratio feature ........................................40 Chapter 1: Introduction.................................................. 8 Selectingthe cinema mode ............................
ページ8に含まれる内容の要旨
Chapter 1: Introduction Features of your new TV The following are just a few of the manye xciting features of yourne w Toshiba widescreen, integrated HD, LCD TV: • Integrated digital tuning (8VSB ATSC and QAM) eliminates the needfor aseparate digital converter set-top box (in most cases). • Two HDMI™ digital, high-definition multimedia interfaces 1080i input support ( page17). • HDMI new capability Lip-Sync Latency activatesan audio/video displaytiming adjustment func
ページ9に含まれる内容の要旨
Chapter 1: Introduction 10�See “Menu layout and navigation” for a quicko verview Overview of steps for installing, ofna vigating the TV’s menu system( page 27). 11�Programchannels into the TV’s channelmemory setting up, and using your new TV ( page 30). Follow these steps to set up your TV and begin using its many 1�For details onusing the TV’s features, see Chapters6 exciting features. and 7. 1�For help, refer to the Troubleshooting Guide, Cha
ページ10に含まれる内容の要旨
1 Chapter 1: Introduction TV front and side panel controls and connections Model 37AV502U is usedin this manual for illustrationpurposes. 4 8 5 9 6 7 10 3 2 1� Green LED 8� CHANNEL pq— Whenno menuis on-screen, these PowerLED (Green) = Po wer indicator buttonschange the channel (programmed channels only; page 30). � Remote sensor — Point theremote control to ward this remote sensor ( “Remote control effective range”on 9� VOLUME tu— Thes
ページ11に含まれる内容の要旨
Chapter 1: Introduction TV back panel connections For an explanation ofcable types and connections, see pages 12–19. 1� HDMI™ IN — High-Definition Multimedia Interface input 7� VIDEO-1 IN— Standard (composite) video and standard receivesdigital audio and uncompressed digital video audio inputs plusoptional S-video inputs for connecting from anHDMI deviceor uncompressed digital video devices with composite video orS-video output. froma D VI device. Als
ページ12に含まれる内容の要旨
Chapter 2: Connecting your TV HDMI™ cable (with HDMI Logo “ ”) Overview of cable types Cables canbe purchased frommost storesthat sell audio/ videode vices. Before purchasing any cables, be sure of HDMI (High-Definition Multimedia Interface) cable isfor connector typesrequired by your devicesand the length of usewith de vices with an HDMI output. AnHDMI cable each cable. delivers digital audio and video inits nati veformat. This cablecarries
ページ13に含まれる内容の要旨
Chapter 2: Connecting your TV Connecting a VCR and antenna or Cable TV (no Cable box) From Cable TV or antenna You will need: To view the antenna or Cable signal: • coaxial cables Selectthe ANT/CABLEvideo inputsource onthe TV.* • standard A/V cables To view the VCR: − For better picture performance, if your VCR has S-video, use an S-video cable (plus the audio cables) instead of TurnON the VCR.Select the VIDEO 1video input sourceon the standard video cable. Do
ページ14に含まれる内容の要旨
Chapter 2: Connecting your TV Connecting a VCR with S-video and a cable box An S-video connectionwill providebetter picture performancethan a standard (composite)video cable. From Cable TV You will need: To view basic and premium Cable channels: • coaxialcables TurnOFF the VCR.Select the ANT/CABLEvideo input • S-videocable source on the TV.* Tunethe TV tochannel 3 or 4 (whichever − Do not connect both types of video cable to VIDEO 1 channelthe Cable
ページ15に含まれる内容の要旨
Chapter 2: Connecting your TV ® Connecting a DVD player with ColorStream (component video), a VCR, and a satellite receiver ® Your TV has two sets of ColorStream (component video) inputs. You will need: To view satellite programs using the component video connections: • coaxialcables • standard A/Vcables Turn onthe satellite receiver. Select the ColorStream HD-2 − For better picture performance, if your VCR has S-video, video input sourceon the TV.* use an S-video cable
ページ16に含まれる内容の要旨
Chapter 2: Connecting your TV Connecting a camcorder You will need: • standard A/V cables − For better picture performance, if your camcorder has S-video, connect an S-video cable (plus the audio cables) to VIDEO 1 on the TV back instead of the VIDEO 2 on the TV side panel. To view the camcorder video: Select the VIDEO 2 video input sourceon the TV.* * Toselect the video input source, press INPUTon the remote control ( page21). T opr ogram the TV remote control tooperate
ページ17に含まれる内容の要旨
Chapter 2: Connecting your TV To connect a DVI device, you will need: Connecting an HDMI™ or DVI • oneHDMI-to-D VIadapter cable (HDMI type Aconnector) perD VI device device to the HDMI input − For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The The HDMI input onyour TV receives digitalaudio and recommended length is 6.6 ft (2m). uncompressed digital video froman HDMIsource de vice, • one pairof standard analog
ページ18に含まれる内容の要旨
Chapter 2: Connecting your TV Note: Connecting a digital audio system • Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are ® The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby * not compatible with standard optical out signals may not work properly, creating a high noise level that may Digital or 2-channeldo wn-mixedPCM (pulse-code ® damage speakers or headphones. THIS DAMAGE IS NOT modulation) signal for use with
ページ19に含まれる内容の要旨
Chapter 2: Connecting your TV may be skipped or you may not be able to pause during Connecting a personal computer multi-angle scenes. • Signal names for mini D-sub 15-pin connector (PC) Signal Signal Signal Pin No. Pin No. Pin No. name name name With either the PC INor HDMI connection, you can watch 1 R 6 Ground 11 Reserved your computer’sdisplay on the TV andhear the sound from 2 G 7 Ground 12 SDA the TV’sspeak ers. 3 B 8 Ground 13 H-sync To connect a PC to the PC IN termin
ページ20に含まれる内容の要旨
Chapter 3: Using the remote control • Always remove batteries from the remote control if they Preparing the remote control for are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from use leaking into the battery compartment. Your TVremote control can operateyour TV and many other Remote control effective range devices suchas cable converterbox es, satellite receivers, VCRs,D VDplayers, and HTIBs(home
