ページ1に含まれる内容の要旨
20-INCH PREMIUM
TFT-LCD MONITOR
20RTH
INSTRUCTION MANUAL
Please read this manual thoroughly before use, and keep it handy for future reference.
ページ2に含まれる内容の要旨
SAFETY INSTRUCTION…………………………………………………………………….2 – 3 1. Important Safety Instructions ……………………………………………………………2 – 3 2. Safety Precautions ……………………………………………………………………….3 CAUTIONS ………………………………………..……………………………………………..4 FCC RF INTERFERENCE STATEMENT …………………………………………………….5 CONNECTING WITH EXTERNAL EQUIPMENT…………………………………………… 6 REMOTE FUNCTIONS ……………………………………………………………………….. 7 CONTROLS AND FUNCTIONS…………………………………………………………..8 - 26 MOUNTING GUIDE …………………………………………………………….……..…….. 27 D-SUB CONN
ページ3に含まれる内容の要旨
Important Safety Instructions 1). Read these instructions 2). Keep these instructions.. 3). Heed all warnings. 4). Follow all instructions. 5). Do not use this apparatus near water. 6). Clean only with dry cloth. 7). Do not block any ventilation openings. Install in accordance with the maufacturer’s instructions. 8). Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9). Do not defeat the s
ページ4に含まれる内容の要旨
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. - Minimum distances(e.g. 10cm)around the apparatus for sufficient ventilation. “WARNING - To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparat
ページ5に含まれる内容の要旨
CAUTIONk The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. ▶ DO NOT USE IN HOSTILE ENVIRONMENTS
ページ6に含まれる内容の要旨
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
ページ7に含まれる内容の要旨
A. BOTTOM PANEL CONTROL 1 7 6 5 4 3 2 1. DC 15V (12V) IN 2. COMPONENT Y,Pb,Pr & SOUND L,R 3. AUDIO OUT 4. PC STEREO IN 5. D-SUB IN 6. DVI IN 7. HDMI IN B. SIDE PANEL CONTROL 1 1. VIDEO 1(AV1) IN 2. VIDEO 1(AV1) OUT 2 3. VIDEO 2(AV2) IN 3 4. VIDEO 2(AV2) OUT 4 5. S-VIDEO (Y/C) IN 5 6. S-VIDEO (Y/C) OUT 6 7. AV1, S-VIDEO AUDIO IN 7 9 8. AV1, S-VIDEO AUDIO OUT 8 10 9. AV2 AUDIO IN 10. AV2 AUDIO OUT 11. DC15V(12V) ADAPTOR 11 INSTRUCTION MANUAL……………
ページ8に含まれる内容の要旨
C. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( AV1/AV2/S-Video/DVI/PC) sources. 3. AUTO Auto geometry adjustment in PC Source. 4. MUTE Mute the sound. 5. MENU Activates and exits the On Screen Display. 6. EXIT Exit the On Screen Display. 7. VOL( ) Increases or decreases the level of audio volume. 8. UP/DOWN Move to OSD menu. 9. ENTER Accepts your selection or displays t
ページ9に含まれる内容の要旨
D. FRONT KEY CONTROL 1 2 3 4 7 8 9 5 6 1. MENU Activates and exits the On Screen Display. 2. SOURCE Select PC or video source. Select On Screen Display menu 3 / 4. ▼ / ▲ This button allows user to enter the sub-menu of the activated function 5 / 6. ◀▶ VOL Adjust the volume / Adjust menu settings. 7. IR Sensor Remote controller sensor. 8. POWER LED The power LED(next to the power switch) lights with green when the power is turned ON. The power is turned off
ページ10に含まれる内容の要旨
A: CUSTOM MENU (Only PC mode) Press the MENU button and then up(▲) / down(▼) button to select the Custom menu. Press the up(▲) / down(▼) button to select Custom sub menu. Press (◀) /right(▶) button to adjust picture setting. Press the MENU button to save. INSTRUCTION MANUAL…………………………………………………………………………… 10
ページ11に含まれる内容の要旨
B. Picture / Sound Menu(Only Video mode) 4 : 3 Press the MENU button and then up(▲) / down(▼) button to select the Picture / Sound. Press the right(▶) or ENTER button. 1. Picture Mode Press the up(▲) / down(▼) button to select the Picture Mode. Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Picture Mode. Press the MENU button to save. 11 …………………………………………………………………………… INSTRUCTION MANUAL
ページ12に含まれる内容の要旨
2. Color Tone 4 : 3 Press the up(▲) / down(▼) button to select the Color Tone. 4 : 3 Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired color tone. Press the MENU button to save. INSTRUCTION MANUAL…………………………………………………………………………… 12
ページ13に含まれる内容の要旨
3. Mute 4 : 3 Press the up(▲) / down(▼) button to select the Mute. 4 : 3 Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired Mute. Press the MENU button to save. 4. Volume 4 : 3 Press the up(▲) / down(▼) button to select the Volume. Press (◀) /right(▶) button to adjust Volume. Press the MENU button to save. 13 …………………………………………………………………………… INSTRUCTION MANUAL
ページ14に含まれる内容の要旨
5. Size 4 : 3 Press the up(▲) / down(▼) button to select the Size. Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired Size. Press the MENU button to save. 6. NR Press the up(▲) / down(▼) button to select the NR. INSTRUCTION MANUAL………………………………………………………………………………14
ページ15に含まれる内容の要旨
Press the (▶) or ENTER button and then up(▲) / down(▼) button to select on or off. Press the MENU button to save 6. PC (Only PC mode) Press the up(▲) / down(▼) button to select the PC Press the ▶ or ENTER button 15 …………………………………………………………………………… INSTRUCTION MANUAL
ページ16に含まれる内容の要旨
Press the up(▲) / down(▼) button to select PC sub menu Press the right(▶) or ENTER button and then left (◀) /right(▶) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elements. H. position: Move image horizontally on screen right or left. V. position: Move image vertically on screen up or down. Frequency: Adjust the vertical noise of screen image. C. PIP MENU
ページ17に含まれる内容の要旨
1. PIP Press the up(▲) / down(▼) button to select the PIP. Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the On or Off. Press the MENU button to save. 2. Input Source Press the up(▲) / down(▼) button to select the Input Source. 17 …………………………………………………………………………… INSTRUCTION MANUAL
ページ18に含まれる内容の要旨
Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Input Source. Press the MENU button to save. 3. Size Press the up(▲) / down(▼) button to select the Size. INSTRUCTION MANUAL………………………………………………………………………………18
ページ19に含まれる内容の要旨
Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Size. Press the MENU button to save. 4. Position Press the up(▲) / down(▼) button to select the Position. 19 …………………………………………………………………………… INSTRUCTION MANUAL
ページ20に含まれる内容の要旨
Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Position. Press the MENU button to save. 5. Swap Press the up(▲) / down(▼) button to select the Swap. Press the right(▶) or ENTER button INSTRUCTION MANUAL………………………………………………………………………………20
