ページ1に含まれる内容の要旨
Installation
4 p
Unpacking
Speaker Set:
Audio Cable
2 pcs Speaker
Cables
Remote Control/
Batteries (AA x 2)
Speakers
Monitor
DVI-D to DVI-D cable
Power Cord
2 pcs Temporary Stand
Screw kit:
Unbrako key 4 x Type A
Set top bracket
with velcro for
monitor
cable strap
5 x Type B (with plugs for
brick/concrete wall)
Table stand kit: Wall mount kit:
Wall mount
rail
With cable
strap
Wall
brackets
D13844.02 Page 1
ページ2に含まれる内容の要旨
Installation 4 p DVI-D to DVI-D cable Audio cable To monitor: DIGITAL RGB To monitor: (DVI-D)/INPUT 2 Audio/INPUT 2 Screen size: ‘FULL‘. Source input: ‘DIGITAL RGB’ (INPUT 2). Recommended maximum volume on the monitor is 32 out of 45 For Picture Layout: Choose ‘Picture outside Picture’. For VGA Monitor Format: Choose ‘Wide’. Press ‘Save’. D13844.02 Page 2
ページ3に含まれる内容の要旨
Wall mount 4 p 1. Put monitor onto temporary stands 2. Mount the Wall brackets with and mount the speakers according to 4 x screws Type A. the speaker mounting instructions. 3. Bend the bracket into correct shape 4. Place Set Top onto bracket. Make sure velcro strips are matched properly! bracket is needed for cable space towards wall. Maximum 7 cm. 5. Connect cables (see page 2) and 6. Wall mounting: Make sure to follow instructions on next page according A - Wooden pillars (gyp
ページ4に含まれる内容の要旨
Wall mount 4 p 6 A) Wooden pillars (w/gypsum) 6 B) Wooden pillars (w/gypsum) 60 cm center-center. 16 inch (41 cm) center-center. with 4 x Type B screws with 5 x Type B screws 7 Hook the system onto the wall mount rail. 6 C) Brick/Concrete wall. 1 2 8 Fixate cables along the wall. 1. Drill a small initial hole 2. Drill a larger hole for plugs 3. Mount into Ø 10 mm holes with 5 x Type B plugs and screws. recommended safety height to keep Set
ページ5に含まれる内容の要旨
Table stand 4 p 2. Mount the speakers according to the speaker mounting instructions. mount the Table stand with 4 x screws Type A. Never use temporary stands as table stand. For help during wall mount purpose only! 3. Bend the bracket into correct shape Make sure velcro strips are matched properly! D13844.02 Page 5
ページ6に含まれる内容の要旨
4 p 4. Place Set Top onto bracked. Place bracket and Set Top along edge of monitor 5. Connect cables (see page 2) rigid surface or table. D13844.02 Page 6