ページ1に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION
20” Digital / Analog
LCD TV
Owner’s Manual
LC200SL8 A
LC200SL8
TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.
IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER
READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR
VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com
© 2007 Funai Electric Co., Ltd.
ページ2に含まれる内容の要旨
NTRODUCTION I WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC RISK OF ELECTRIC SHOCK SHOCK IS PRESENT WITHIN THIS UNIT. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS SYMBOL INDICATES THAT THERE ARE DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE IMPORTANT OPERATING AND MAINTENANCE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVI
ページ3に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION 17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into 20. REPLACEMENT PARTS - When replacement parts are required, be this TV through openings as they may touch dangerous voltage sure the service technician uses replacement parts specifi ed by points or short out parts that could result in a fi re or electric shock. the manufacturer that have the same characteristics as the original Ne
ページ4に含まれる内容の要旨
NTRODUCTION I LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. • Ins
ページ5に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Features Contents DTV/TV/CATV INTRODUCTION - Y ou can use your remote control to select channels which Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 are broadcast in digital, conventional analog, standard Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
NTRODUCTION I Remote Control Function 1. POWER button (p12) 10. RETURN button Press to turn the unit on and off. P ress to return to previous menu 2. MUTE button (p15) operation. 1 11 Press to turn the sound on and off. 11. INPUT button (p16) 2 12 3. SLEEP button (p18) • Press to access connected an 3 13 Press to activate the sleep timer. external device like a DVD player 4. Number buttons (p15) or VCR. 14 • Press to select channels. • Press to switch between the 4 -/ENT. button di
ページ7に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Control Panel 1 1. SETUP button (p13) 2 Press to display the main menu. 3 X Y 2. VOLUME / buttons (p15) 4 X Y P ress to adjust the volume or move right( )/left( ) 5 through the main menu items. SETUP VOLUME CHANNEL INPUT POWER K L 3. CHANNEL / buttons (p15) P ress to select channels or move up/down through the main menu items. top of the unit 4. INPUT button (p16) • Press to access connecte
ページ8に含まれる内容の要旨
NTRODUCTION I Attaching a Wall Mount Bracket (sold separately) The following is a description of the method for attaching a wall mount to this unit. When performing this operation, refer to the instruction manual included with the wall mount kit. # CAUTION Any damage caused by incorrectly attempting to mount this unit is not covered under the terms of the manufacturers warranty. This unit may be used only with VMFb manufactured by CSAV. Use with other wall mounts may result in in
ページ9に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION ONNECTION C Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: Be sure your antenna or other device is connected properly before plugging in the power cord. [Antenna Cable Connection] When connecting the unit to an antenna or cable TV company (without cable/s
ページ10に含まれる内容の要旨
ONNECTION C Cables not included. Please purchase the necessary cables at your local store. External Device Connection [Component Video Cable Connection] Component video connection offers better picture quality for video devices connected to the unit. Use a component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s component video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO2. component vid
ページ11に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. [Video Connection] Video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO1. When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack. r
ページ12に含まれる内容の要旨
NITIAL SETTING I These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup Note: If you connect the cable system directly, contact the CATV This section will guide you through the unit’s initial setting which includes installer. selecting a language for your on-screen menu and “AUTO PRESET CH”, which If you press [POWER] or [SETUP] during “AUTO PRESET CH”, automatically scans and memorizes viewable channels. this setti
ページ13に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Main Menu Auto Channel Scan This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the TV press [SETUP]. For more details, see the reference page for each item. to a diff erent area after the initial setting, or if you restore the DTV channel The main menu consists of the function setting items below. you deleted
ページ14に含まれる内容の要旨
NITIAL SETTING I Language Selection Note: If you connect the cable system directly, contact the CATV You can choose English, Spanish, or French as your on-screen language. installer. I f you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled. Press [SETUP] to display the main menu. 1 When no channel can be received by auto channel scan, “NO TV SIGNALS” will be displayed on the TV screen. Channel settings will be sav ed even if the power fails. I
ページ15に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION ATCHING TV W Channel Selection Volume Adjustment K Select channels by pressing [CH. /L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. K Use [VOL. X/Y] to adjust the audio volume. • T o select the memorized channels, use [CH. /L] or [the Number buttons]. • T o select the non-memorized channels us
ページ16に含まれる内容の要旨
ATCHING TV W Switching Each Mode Switching Audio Mode You can easily switch with the remote control to the DTV (ATSC) and TV This section describes how to switch the audio in the analog mode and how (NTSC) or to access an external device when they are connected to the unit. to switch the audio language in the digital mode. TV Press [INPUT] repeatedly to cycle through analog TV, While receiving an MTS broadcast, press [AUDIO] 1 digital TV, VIDEO1 and VIDEO2. repeatedly to cycle through the a
ページ17に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. TV DTV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number is displayed. channel such as program title, program guides are displayed. Press [DISPLAY]. Press [DISPLAY] repeatedly to cycle through the
ページ18に含まれる内容の要旨
ATCHING TV W TV Screen Display Mode Sleep Timer DTV The sleep timer can be set to automatically turn off the unit after an incremental period of time. 2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal. Press [SCREEN MODE] repeatedly to switch the TV Press [SLEEP] to set the sleep timer. 1 aspect ratio. SLEEP OFF • Sleep timer display appears on the TV screen. Press [SLEEP] repeatedly to change the amount of 2 time
ページ19に含まれる内容の要旨
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION PTIONAL SETTING O Channel Add/Delete The channel add/delete function lets you add the channel that was not Press [SETUP] to exit. 6 added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels. Press [SETUP] to display the main menu. 1 Note: ”ADD/DELETE(DTV)” or “ADD/DELETE” menu will disappear automatically in about 10 seconds
ページ20に含まれる内容の要旨
PTIONAL SETTING O Picture Adjustment Closed Caption You can adjust brightness, contrast, color, tint and sharpness. TV You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen Press [SETUP] to display the main menu. 1 for the hearing impaired. Press [SETUP] to display the main menu. 1 Use [Cursor K /L] to select “PICTURE”, then press 2 [ENTER]. e.g.) digital TV mode Use [Cursor K /L] to select “CAPT
