ページ1に含まれる内容の要旨
PN-V601
LCD MONITOR
OPERATION GUIDE
ページ2に含まれる内容の要旨
Contents Part Names .......................................................................3 Basic Operation ...............................................................5 Remote Control Mode ....................................................7 Menu Items .......................................................................8 Displaying the menu screen .........................................8 Menu item details .........................................................9 Adjustments for PC s
ページ3に含まれる内容の要旨
Part Names nFront view 1 1. LCD panel 2. INPUT button The rear buttons if seen 3. MENU button from the front 4. VOL -/Cursor control ( ) button 5. VOL +/Cursor control ( ) button 6. BRIGHT -/Cursor control ( ) button 7. BRIGHT +/Cursor control ( ) button 8. Power button 23 45 6 7 8 9 9. Power LED nRear view 10 10. Fan 11. Vents 11 12. Handles 13. Expansion terminal cover Additional input/output terminals are available by attaching the PN-ZB02 interface expansion board (optional). 12 14. Op
ページ4に含まれる内容の要旨
Part Names n Remote control unit (Supplied with the PN-ZR01 (optional)) 1 1. Signal transmitter 2. POWER button 3. MUTE button 4. VOL +/Cursor control ( ) button 5. BRIGHT -/Cursor control ( ) button 6. DISPLAY button 8 2 7. MODE button 8. INPUT button 3 9 9. MENU button 4 10. BRIGHT +/Cursor control ( ) button 5 1 1. VOL -/Cursor control ( ) button 10 12. SIZE button 11 12 6 7 n Remote control sensor box (Supplied with the PN-ZR01 (optional)) 1 1. Brightness sensor 2. Remote
ページ5に含まれる内容の要旨
Basic Operation When performing operation of multiple monitors with the 2. MUTE remote control unit, first set the remote control unit to the Turns off the volume temporarily. appropriate remote control mode (see page 7). Press the MUTE button again to turn the sound back to the previous level. 1 If using the monitor buttons, either hold both and at the same time or select MUTE AUDIO from the OPTION menu. 2 3. MENU 3 Displays and turns off the menu screen (see page 8). 4 4. VOL +/- (Volume a
ページ6に含まれる内容の要旨
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen. ZOOM 1 PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. The edges of the image may be cut off. AV input ZOOM 2 PC input Use this size if ZOOM 1 c
ページ7に含まれる内容の要旨
▲ Remote Control Mode With the remote control unit it’s possible to perform operation ALL MONITORS of... Performs operation of all primary/secondary monitors. • The primary monitor ALL * will be displayed on the menu of the primary. • Monitors with a specified ID No. * When it receives signals from the remote control unit, • All primary/secondary monitors “Operating all monitors.” will be displayed on the secondary It’s necessary to specify which type of operation will be screen. (Exclud
ページ8に含まれる内容の要旨
Menu Items TIPS Displaying the menu screen • The menu will differ depending on the input mode. Video and audio adjustment and settings of various functions • The menu screen will close automatically if no operation is are enabled. This section describes how to use the menu performed for about 15 seconds. (DATE/TIME SETTING, items. See pages 9 to 12 for details of each menu items. SCHEDULE and LAN SETUP screens will close in about 4 minutes.) Caution Menu screen display • Do not turn the mai
ページ9に含まれる内容の要旨
Menu Items nPICTURE Menu item details AUTO (PC D-SUB/PC RGB) The menu will differ depending on the input mode. The CONTRAST and BLACK LEVEL are automatically adjusted. nSCREEN Pressing performs adjustment. AUTO (PC D-SUB/PC RGB) CONTRAST The CLOCK, PHASE, H-POS, and V-POS are automatically Adjusts the brightness of the image. adjusted. Pressing performs adjustment. BLACK LEVEL Use this automatic adjustment when you use the PC D-sub Adjusts the entire brightness of the video signals. input
ページ10に含まれる内容の要旨
Menu Items POWER ON DELAY nAUDIO You can delay the screen display after the monitor is turned TREBLE on. The period can be set up to 60 seconds in units of one Adjusts the volume of treble-level sound. second. When this function is activated, the power LED BASS flashes (at approx. 1 second interval) in orange. This function is disabled when 0 is specified. Adjusts the volume of bass-level sound. STANDBY MODE BALANCE When STANDARD is selected, startup time from standby Adjusts the balance of
ページ11に含まれる内容の要旨
Menu Items BRIGHTNESS SENSOR POWER MANAGEMENT (When connected to the PN-ZR01 only) POWER MANAGEMENT determines whether or not to When set to ON or ON: DISPLAY, the brightness will switch modes from no signal to the input signal standby automatically change according to the lighting and mode. surrounding brightness. Performs operation with the primary COLOR SYSTEM (AV S-VIDEO/AV VIDEO) monitor. If set to ON: DISPLAY, the effect will be displayed Select the color system of the AV equipment wh
ページ12に含まれる内容の要旨
Menu Items TIPS nMULTI • When WHITE BALANCE is set to THRU, BLACK LEVEL, ENLARGE (See page 13.) CONTRAST, TINT, COLORS and GAMMA cannot be set. Sets whether or not to use the enlarge function. • If COLOR MODE is set to sRGB, the following items cannot ADVANCED (ENLARGE) be set. WHITE BALANCE, PRESET, USER, COPY TO USER, and ENLARGE H / ENLARGE V GAMMA ......... Sets the number of screen splits (number of • When the COLOR MODE is set to VIVID, GAMMA can not monitors) in the horizontal/vert
ページ13に含まれる内容の要旨
Menu Items nEnlarge nZOOM2 SPECIAL SETTING • You can align several monitors and integrate them into a If you connect a laptop computer with any of the following single large screen to display. screen resolutions and black bands appear around the • Up to five monitors can be aligned in both the horizontal screen, set ZOOM2 SPECIAL SETTING of INPUT SIGNAL on and vertical directions. the OPTION menu to ON and then select ZOOM2 in the SIZE • Each monitor displays enlarged views of separated ima
ページ14に含まれる内容の要旨
Menu Items Caution nSCHEDULE You can set the time to switch the monitor on and off. • Do not switch off the main power after setting the Set this function with “SCHEDULE” in the OPTION menu. (See SCHEDULE. page 11.) • Specify the correct date and time. (See page 11.) SCHEDULE does not function unless the date and time are PC D-SUB SCHEDULE specified. XXXX/XX/XX XXX XX:XX:XX • Check regularly that the set date and time are correct. No. (1) POWER (2) DAY OF THE WEEK (3) TIME (4) INPUT (5) •
ページ15に含まれる内容の要旨
Menu Items nADVANCED items (AV input) (See page 9 Adjustments for PC screen display for additional Menu item details.) nAutomatic adjustment FLESH TONE When you use the PC D-sub input terminal or PC RGB input Adjust the hue control. terminals to display a PC screen for the first time, or when 3D-NR you change the setting of the PC, use the automatic screen adjustment. Reduce the noise of playback images on video. 1. Switch the input to PC D-SUB or to PC RGB and display Setting a higher leve
ページ16に含まれる内容の要旨
Initialization (Reset)/Functional Restriction Setting (FUNCTION) You can return the settings to their factory-preset values and LED restrict operations. Specifies whether to light the power LED. OFF cannot be selected when STANDBY MODE is LOW SIZE 1. If using the remote control unit, press until “F” POWER. is displayed in the upper left area of the screen, then TEMPERATURE ALERT while “F” is being displayed, press , , , and Selects the notification method for an abnormal in that order. t
ページ17に含まれる内容の要旨
Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM Communication conditions port) on the PC. You can also connect multiple monitors via a daisy chain by Set the RS-232C communication settings on the PC to match using a PC. By assigning ID numbers to each monitor (see the monitor’s communication settings as follows: page 18), you can make input mode selection/adjustment or Baud rate * Stop bit 1 bit can check the status of a specific monitor.
ページ18に含まれる内容の要旨
Controlling the Monitor with a PC (RS-232C) nResponse code format nCommunication interval When a command has been executed correctly • After OK or ERR is returned, you must send the following commands. O K Return code To set a timeout for the command response, specify 10 (0DH, 0AH) seconds or longer. A response is returned after a command is executed. When connecting multiple monitors in a daisy chain, set the timeout to at least the product of the monitor’s position from * If an ID numbe
ページ19に含まれる内容の要旨
Controlling the Monitor with a PC (RS-232C) IDLK ........The parameter of this command sets the ID nCommands for ID control number of the monitor. The monitor is subject to all The command examples shown on this page assume the subsequent commands. following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 Example: Following commands are for the monitor IDLK0002 ← with ID number: 2. Searching for monitor with ID number: WAIT ← 2 IDST .........A monitor
ページ20に含まれる内容の要旨
Controlling the Monitor with a PC (RS-232C) nRepeater control Setting of the GAMMA user data This system has a function to allow setting of multiple nTo transfer the GAMMA user data monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater Use the user data transfer commands (UGRW, UGGW and control function without assigning ID numbers. UGBW). For each of the R, G and B colors, divide the total 512 pieces of user data into 16
