ページ1に含まれる内容の要旨
LC-32SB28UT-A
LC-42SB48UT-A
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
IMPORTANT:
Model No.:
To aid reporting in case of loss or theft, please
record the TV's model and serial numbers in the
Serial No.:
space provided. The numbers are located at the
rear of the TV.
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
This “bolt of lighting” indicates
uninsulated material within your unit may
CAUTION
cause an el
ページ2に含まれる内容の要旨
IMPORTANT INFORMATION FCC Regulations state that any unauthorized changes or modifications to this WARNING: equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connec
ページ3に含まれる内容の要旨
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safe
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table reco
ページ6に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Caring for the Cabinet • Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet. • Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking. • Wiping with a hard cloth or using strong force may scratch the surface of the cabinet. • If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water and thoroughly
ページ7に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CHILD SAFETY It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. • Flat panel disp
ページ8に含まれる内容の要旨
32” 42” QUICK REFERENCE Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit “AA” size battery AC cord (g1) (g2) (g1) Page 11 Page 13 Page 10 x 4 Stand ( 1) g Operation manual with Screws ( 1) g Page 8 • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories. Attaching/Detaching the Stand • Before attaching (or detaching) the stand, unplug the AC
ページ9に含まれる内容の要旨
QUICK REFERENCE Detaching the stand neck for wall mounting CAUTION Please use care when disassembling cabinet, stand, and pillar for wall mounting. Detach the stand neck in the correct direction. Do not remove the stand neck from the TV unless using an optional wall mount bracket to mount it. 1. Loosen the 4 screws that secure the stand neck by using a cross-head screwdriver. Remove stand cover from the TV set. These 2 screws need to be installed in the right holes. Do not force or over
ページ10に含まれる内容の要旨
QUICK REFERENCE Quick Installation Tips Attach your antenna to the back of the How to turn on the television for the first 1 4 television. (See page 12.) time. A) Press POWER on the television. Connect the AC plug for the television 2 into the AC outlet. B) The POWER indicator on the front of the television lights BLUE. POWER indicator AC outlet • Place the TV close to the AC outlet, and POWER keep the power plug within reach. • This product must only be connected to a 120V, 60Hz. Connect
ページ11に含まれる内容の要旨
QUICK REFERENCE Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. ■ Cautions regarding the remote control unit • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. • Do not install or place the remote control unit un
ページ12に含まれる内容の要旨
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. 1. A 75-ohm system is generally a round F-type connector cable with F-type connector that can 75-ohm coaxial cable easily be attached to a terminal without (round) tools (Commercial
ページ13に含まれる内容の要旨
Preparation Installing Batteries in the Remote Control Unit If the remote control fails to operate TV functions, replace the batteries in the remote control unit. 1 Open the battery cover. 3 Close the battery cover. 2 Insert two “AA” size batteries (supplied with the product). • Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the
ページ14に含まれる内容の要旨
Contents IMPORTANT INFORMATION ...................................................................................... 1 TRADEMARKS ............................................................................................................. 2 IMPORTANT SAFETY INSTRUCTIONS ...................................................................... 3 QUICK REFERENCE .................................................................................................... 8 Supplied Accessories ..............
ページ15に含まれる内容の要旨
Part Names TV (Front) Remote control sensor POWER indicator (See page 19.) TV (Side/Rear) *2 *1 Volume buttons (VOL +/-) INPUT 1 (AV IN) Channel buttons (CH / ) MENU button USB INPUT button *3 Earphone Output POWER button INPUT 8 AC INPUT terminal (HDMI) *1 INPUT 4 (PC IN) INPUT 5, 6, 7 (HDMI) Antenna/Cable in RS-232C IOIOI AUDIO OUT INPUT 2, 3 (COMPONENT) *1: See pages 12, 17, and 18 for external equipment connection. *2: See page 19 and 28 for button operations. *3: See page 10 for conn
ページ16に含まれる内容の要旨
Part Names Remote Control Unit 2 1 6 DISPLAY: Display the current channel (or input source) information on the screen. k l 7 VOL / : Set the volume. (See page 21.) 8 CC: Display captions during closed-caption 3 source. (See page 23.) 9 AUDIO: Display the MTS/SAP setting menu. (See page 22-23.) 4 10 SURROUND: Display the surround setting menu. (See page 22.) 11 FREEZE: Set the still image. Press again to 5 14 return to normal screen. 15 6 12 EXIT: Turn off the menu screen. 16 13 FAVORITE CH
ページ17に含まれる内容の要旨
Connecting to External Equipment You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD player, VCR, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or INPUT on the TV. (See page 21.) CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) ca
ページ18に含まれる内容の要旨
Connecting to External Equipment Connecting a PC Terminal on the TV Cable Terminal on PC INPUT 4 (PC IN) RGB cable (commercially available) ø 3.5 mm stereo minijack cable (commercially available) INPUT 5, 6, 7, 8 HDMI-certified cable (commercially available) • The HDMI terminals only support digital signal. • Refer to page 42 for a list of PC signals compatible with the TV. • When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of PC IN. • To enjoy the 1080p displ
ページ19に含まれる内容の要旨
Watching TV Turning On/Off the Power Press POWER on the TV, or POWER on the remote control unit to turn the power on. • POWER indicator (Blue): The TV is on. Press POWER on the TV, or POWER on the remote control unit again to turn the power off. • The TV enters standby and the image on the screen disappears. • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet. • Small amount of electric power is still consumed even when the TV i
ページ20に含まれる内容の要旨
Watching TV 3. Location setting 5. Channel scan setting a a • Press /b to select “Home” or • Press /b to select “Scan” “Store” and press d to the next or “Skip Scan” and press d to step. continue. Initial Setup Location Initial Setup Channel Scan Please select your location: Home First, please connect cable and/or Scan Home mode is destined for home antenna. Store Skip Scan user. Start channel scan now ? Store mode is designed for retail store. If you skip this step, the channel scan could be
