Edelbrock 5213の取扱説明書

ページ1に含まれる内容の要旨

Edelbrock Anti-Hop Bars
for 1964-1972 GM A-Body (Catalog #5213)
& 1978-1987 GM A/G Body (Catalog #5214)
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new anti-hop bars. If you have any questions, contact our
Technical Hotline at: 1-800-416-8628, 7 am to 5 pm, Monday-Friday, Pacific Standard Time or e-mail us at
Edelbrock@Edelbrock.com.
Tools and Supplies Required:
❑ Jackstands ❑ Torque Wrench (70 lb. min.)
❑ Tire Chocks ❑ Drill Motor
❑ 1/4” Drill Bit

ページ2に含まれる内容の要旨

7. Locate anti-hop bar on steel bushing and 1/2" (Fig. 3) snug at this time. 8. Install upper trailing arm on anti-hop bar urethane bushing. 9. Drill 1/4" hole through axle housing web using anti-hop bar as guide. NOTE: Make sure to have at minimum 1/4" of material between bolt hole and web edge, (Fig. 2). 10. Install 1/4" bolt, washer and nyloc nut. Tighten bolt to 20 ft/lbs. 11. Use thread lock compound on upper trailing arm and steel bushing bolts and torque to 70 ft/lbs. 12. Remove right upp