ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Contents Features ................................................................. 2 Managing Stations: Sorting Channel List ............. 17 On-Screen Information ......................................... 17 Introduction ............................................................. 2 Preparation ............................................................. 2 Media Playback Using Media Browser ................. 18 Safety Precautions ................................................. 2 Viewing Vi
ページ3に含まれる内容の要旨
Features Introduction • Remote controlled colour LCD TV. Please read the corresponding instructions of this handbook prior to the fi rst usage of the device, even • Fully integrated Terrestrial digital TV (DVB-T - MPEG2) when the usage of electronic devices is familiar (DVB-T- MPEG4). to you. Notice especially the chapter SAFETY • HDMI connectors for digital video and audio. This PRECAUTIONS. Carefully keep the handbook as connection is also designed to accept high defi nition future ref
ページ4に含まれる内容の要旨
Power Cord Servicing Do not place the set, a piece of furniture, etc. on the Please refer all servicing to qualifi ed power cord (mains lead) or pinch the cord. Handle the personnel. Do not remove the cover power cord by the plug. Do not unplug the appliance by yourself as this may result in an electric pulling from the power cord and never touch the power shock. cord with wet hands as this could cause a short circuit or Waste Disposal electric shock. Never make a knot in the cord or tie it w
ページ5に含まれる内容の要旨
Installation Connection to a Television Distribution System (Cable TV etc.) from Tuner To prevent injury, this device must be securely attached to the wall in accordance with the installation Device connected to the protective earthing of the instructions when mounted to the wall (if the option building installation through the mains connection or is available). through other apparatus with a connection to protective earthing-and to a television distribution system using LCD Screen coaxi
ページ6に含まれる内容の要旨
Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy effi ciency feauture of this TV. To reduce energy consumption, you should take the following steps: • You can use Power Save Mode setting, located in the Setting menu. If you set Power Save Mode as On, the TV will switch to energy-saving mode and luminance level of TV set wil
ページ7に含まれる内容の要旨
Detachable Stand Installation Method 1. Stand is placed on a fl at surface. 2. The product is hold over the stand so that it concides with the stand mounting point and then it is left to be mounted with its own weight. Detachable Stand Uninstallation Method 1. TV is laid on a fl at table so that backcover will be on topside. 2. Clamps on the stand are pushed. 3. Stand is pulled back. 4. Stand is detached. English - 6 - A A01_MB61_[GB]_3920UK_IDTV_BRONZE16_32917LED_10069609_50173868.indd 6 01
ページ8に含まれる内容の要旨
Remote Control Buttons 1. Mono/Stereo - Dual I-II / Currrent Language (*) (in DVB channels) 2. Image size / Zooms videos (in Media Browser video mode) 3. Electronic programme guide (in DTV mode) 4. Favourite Mode Selection (in DTV mode) 5. Red button / Stop (in Media Browser) 6. Green button / List Schedule (in EPG) / Tag / Untag All (in favourite list) / Play-Slideshow (in Media Browser) 7. Numeric buttons 8. Teletext / Mix (in TXT mode) 9. Vol
ページ9に含まれる内容の要旨
LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu. Viewing the Back side Connections 1. SCART 2 inputs or outputs for external devices. 2. SCART 1 input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a
ページ10に含まれる内容の要旨
outputs of your device to enable component audio. 5. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input 6. RF Input connects to an aerial antenna system. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages. 7. PC Input is
ページ11に含まれる内容の要旨
Using the Cable Holder Connecting the LCD TV to a PC For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. Power off both computer and display before making any connections. Use 15-pin D-sub display cable to connect a PC to the LCD TV. When the connection is made, switch to PC source. See “Input selection” section. Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix parts.
ページ12に含まれる内容の要旨
Connecting to a DVD Player Using Other Connectors If you want to connect a DVD player to your LCD You can connect a range of optional equipment TV, you can use connectors of the TV set. DVD to your LCD TV. Possible connections are shown players may have different connectors. Please refer below. Note that cables shown in the illustration are to your DVD player’s instruction book for additional not supplied. information. Power off both the TV and the device • For connecting a to a device that
ページ13に含まれる内容の要旨
• With digital terrestrial broadcasting (DVB-T), in Switching On/Off addition to digital teletext broadcasting together with the normal broadcasting, there are also channels with just digital teletext broadcasting. • The aspect ratio (picture shape) when watching a channel with just digital teletext broadcasting is the same as the aspect ratio of the picture viewed previously. • When you press the “ ” button again, the digital teletext screen will be displayed. Analogue Teletext Use of
ページ14に含まれる内容の要旨
OK (Options): Displays programme options including Operation with the Remote Control “Select Channel” option. • The remote control of your TV is designed to control INFO (Event Details): Displays the programmes in all the functions of the model you selected. The functions will be described in accordance with the detail. menu system of your TV. Green button: Programme schedule will be listed Volume Setting Yellow button: Display EPG data in accordane with timeline schedule • Press “V+” butt
ページ15に含まれる内容の要旨
Numeric buttons (Jump): Jumps to the preferred You can set Scan Encrypted as Yes if you want to channel directly via numeric buttons. scan coded stations.Afterwards select the desired Teletext Language. OK (Options): Displays programme options including “Select Channel” option. • Press OK button on the remote control to continue and the following message will be displayed on the Text (Search): Displays “Guide Search” menu. screen: SUBTTL: Press SUBTITLE button to view Select Genre menu. Us
ページ16に含まれる内容の要旨
Manual Tuning HINT: This feature can be used for direct broadcast entry. • Select Manual Channel Scan from the Installation menu by using “ ”/“ ” and OK buttons. Manual Scan options screen will be displayed. • Select the desired Search Type using “ ” or “ ” button. Manual search options will change accordingly. Use “ ”/“ ” button to highlight an item and then press “ ” or “ ” button to set an option. You can press MENU button to cancel. • Press OK button to quit channel list and watch TV
ページ17に含まれる内容の要旨
Analog Fine Tune Operating the Channel List • Select Analog Fine Tune from the Installation menu by using “ ” or “ ” and OK buttons. Analog fi ne tune screen will be displayed. Analog Fine Tune feature will not be available if there are no analog channels, digital channels and external sources stored. • Press OK button to proceed. Use “ ” or “ ” button to set Fine Tune. When fi nished, press OK button again. Clear Service List (*) (*) This setting is visible only when the Country option is
ページ18に含まれる内容の要旨
Locking a Channel Managing Stations: Sorting You can press GREEN button to tag/untag all Channel List channels; YELLOW button to tag/untag a single channel. You can select broadcasts to be listed in the channel list. To display specifi c types of broadcast, you should • Select the channel that you want to lock and select use Active channel list setting. Lock option. Press OK button to continue. Select Active channel list from the Channel list • You will be asked to enter parental control
ページ19に含まれる内容の要旨
When you select Videos from the main options, Media Playback Using Media available video fi les will be fi ltered and listed on this screen. You can use “ ” or “ ” button to select a video Browser fi le and press OK button to play a video. If you select If the USB stick is not recognized after power off/on a subtitle fi le and press OK button, you can select or or First Time Installation, fi rst, plug the USB device deselect that subtitle fi le. The following menu will be out and power off/on
ページ20に含まれる内容の要旨
FAV: Sorts fi les by date. Loop/Shuffl e (BLUE button): Press once to disable Loop. Press again to disable both Loop and Shuffl e. TEXT: Views images in thumbnails. Press once more to enable only Shuffl e. Press again INFO: Changes fi lter options. to enable all. You can follow the disabled functions Slideshow Options with the change of the icons. Media Browser Settings Pause (YELLOW button) : Pauses the slideshow. Continue (GREEN button) : Continues the slideshow. Previous/Next (Left/Right butt
