ページ1に含まれる内容の要旨
PDP-TELEVISION
(PLASMA DISPLAY PANEL)
PS42P3S
PS50P3H
PS63P3H
PS50P3H
PS63P3H
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (PIP)
TELETEXT / TELEWEB (OPTION)
ページ2に含まれる内容の要旨
Safety Instructions ENG ◆ Do not place the PDP on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. ◆ Do not expose the PDP to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the PDP to direct sunlight and other sources of heat. ◆ Do not expose the PDP to any liquids. ◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the PDP. ◆ During a storm conditions (especially when there is lightnin
ページ3に含まれる内容の要旨
Caution ENG The lightning flash and arrow head within the triangle is a CAUTION warning sign alerting you of RISK OF ELECTRIC SHOCK “dangerous voltage” inside DO NOT OPEN the product. The exclamation point within CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT the triangle is a warning sign REMOVE REAR COVER, NO USER SERVICEABLE PARTS alerting you of important INSIDE. REFER SERVICING TO QUALIFIED SERVICE instructions accompanying PERSONNEL. the product. WARNING: TO PREVENT DAMAGE WHICH MAY RESULT I
ページ4に含まれる内容の要旨
ENG Contents ◆ FOREWORD ■ Safety Instructions......................................................................................... 2 ■ User Instructions............................................................................................ 2 ■ Caution .......................................................................................................... 3 ◆ CONNECTING AND PREPARING YOUR DISPLAY ■ Your New Plasma Display Panel...........................................................
ページ5に含まれる内容の要旨
ENG Contents (continued) ◆ USING YOUR DISPLAY ■ Changing the Sound Standard ...................................................................... 34 ■ Adjusting the Sound Settings ........................................................................ 34 ■ Extra Sound Settings..................................................................................... 35 - Auto Volume - Melody - Pseudo Stereo / Virtual Surround ■ Selecting the DUAL Mode (depending on the model) .......................
ページ6に含まれる内容の要旨
Your New Plasma Display Panel The actual configuration on your PDP may be different, ➢ ENG depending on your model. Front Panel PS42P3S/PS50P3H a c b Speaker Speaker PS63P3H a c b a b Power Indicator SOURCE - Power Off; Red External input selection. - Power On; Off - Timer On; Green MENU Menu display. - VOL + c Volume adjustment. Remote Control Signal Receiver Aim the remote control towards this spot on the ▼ CH ▲ PDP. Channel selection. I / Press to turn the PDP on and off. 6
ページ7に含まれる内容の要旨
Your New Plasma Display Panel (continued) The actual configuration on your PDP may be different, ➢ ENG depending on your model. Rear Panel For further details about connection, refer to pages 48~50. ➢ g a c e j b d f h i k a) ONLY FOR SERVICE g) COMPONENT IN Connector for service only. Inputs for external devices, such as DVD, video game device or video disc players. b) DVI IN Connect to the video output jack for device with h) EXT SPEAKER (8 Ω) DVI output. Connect external speakers. c) AUDIO i
ページ8に含まれる内容の要旨
Infrared Remote Control ENG TURNS THE PDP ON AND OFF WHEN YOU PRESS A BUTTON , ‘ ’ APPEARS ALONG WITH SELECED MODE (TV, VCR, CATV, DVD OR STB) AND PRESS TO SELECT A PRESE TIME REMAINING BATTERIES ON LED INTERVAL FOR AUTOMATIC SHUTOFF MAKE THE REMOTE CONTROL WORKS PICTURE SIZE FOR TV, VCR, CATV, DVD PLAYER, STB DIRECT CHANNEL SELECTION TUNES TO THE PREVIOUS CHANNEL SELECT CHANNEL BY INFORMATION NEXT CHANNEL/ TELETEXT NEXT PAGE/ VOLUME INCREASE TELEWEB FORWARD TEMPORARY SOUND SWITCH-OFF EXTERNAL
ページ9に含まれる内容の要旨
Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: ◆ Purchase the PDP ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ - on the battery against - on the remote control ◆ + on the battery
ページ10に含まれる内容の要旨
Installing the Display on the Wall Attachment Panel ENG This wall mount bracket installation guide is for the following models: WMN4230/WMN5030/WMN6330. ☛ This installation guide may be different from the PDP User’s manual. Please refer to the proper installation guide for your product. Installation Notes ◆ Do not install the PDP on any place other than vertical walls. ◆ To protect the performance of the PDP and prevent troubles, avoid the followings: - Do not install next to smoke and fire dete
ページ11に含まれる内容の要旨
Installing the Display on the Wall Attachment Panel ENG 1 Remove the screws from the back of the PDP. PS42P3S PS50P3H PS63P3H 2 Use the screws and assemble the plastic hanger. ◆ Please ask the installers to install the wall mount bracket. ☛ ◆ Please be sure to check if the plastic hanger is completely secured on both the left and right side after hanging the PDP on the wall mount bracket. ◆ Please avoid catching your fingers while installing and adjusting the angle. ◆ Please tightly secure the w
ページ12に含まれる内容の要旨
Connecting Speakers ENG 1 Remove the screws on the rear of the PDP. PS42P3S PS50P3H PS63P3H 2 Hang the two “T” shaped hangers PS42P3S PS63P3H on the square holes on the rear of PS50P3H the PDP. 3 Tighten the PDP and the speaker bracket using the screws removed from the PDP. PS42P3S PS50P3H PS63P3H When moving your PDP, do NOT hold the speaker connected to your PDP. It may damage the ➢ bracket clamping the speaker and your PDP together and result in a drop of your PDP and a risk of personal damag
ページ13に含まれる内容の要旨
Connecting Speakers (continued) ENG Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP. Sub-woofer speaker PS42P3S/PS50P3H ◆ The speakers MUST have to a power ➢ handling capability of 10 watts minimum (impedance 8 Ω). ◆ When you connect the speaker wire to the Sub-woofer speaker external speaker out connector, first bind the speaker wire round the ferrite core to secure it. PS63P3H Ferr
ページ14に含まれる内容の要旨
Connecting to an Aerial or Cable Television Network ENG To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75 Ω coaxial socket on the rear of the PDP. Rear of the PDP 2 If you are using an indoor aerial, you may need to turn it when tuning your PDP until you obtain a picture that is both sha
ページ15に含まれる内容の要旨
Switching On and Off ENG The mains lead is attached to the rear of your PDP. Front of the PDP 1 Plug the mains lead into an appropriate socket. Result: The Standby indicator on the front of the PDP lights up. The main voltage is indicated on the rear of the PDP and ➢ the frequency is 50 or 60Hz. 2 Press the “ I / ” button on the front of the PDP (or POWER() button on the remote control) to switch the PDP on. Result: The programme that you were watching last is re- selected automatically. If you
ページ16に含まれる内容の要旨
Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Display the on-screen menu system The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the next - stored channel. Used to display the - previous stored channel. to Used to display the corresponding channels. For double digit channels, the second digit must be ➢ pushed immediately after the
ページ17に含まれる内容の要旨
Setting Up Your Remote Control ENG This TV’s remote control can operate VCR, CATV , DVD, or Set-top box (STB), in addition to controlling the TV. The remote control is not compatible with the TV ➣ manufactured by another company. VCR 1 Turn off your VCR, Cable box (CATV), DVD or STB. 2 Press the SELECT button. Mode is changed whenever SELECT button is pressed. (new mode is displayed on LED screen.) 3 Press the POWER() button on the remote control. The component you select should turn on. If it t
ページ18に含まれる内容の要旨
Plug & Play Feature ENG When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. Plug & Play 1 If the television is in Standby mode, press the POWER () button on the remote control. Language Result: The message Plug & Play is displayed. It flickers for a little while, and then the Language menu is automatically displayed. 2 Select the appropriate language by pressing the † or … button. 3 Press the b
ページ19に含まれる内容の要旨
Plug & Play Feature (continued) ENG If you want to reset this feature... 1 Press the MENU button. Result: The main menu is displayed. 2 Press the † or … button to select Function. Result: The options available in the Function group are displayed. 3 Press the √ button. 4 Press the † or … button to select Plug & Play. Press the √ button. Result: The message Plug & Play is displayed. Function 5 For further details on how to set, refer to the opposite page. Language English Time √ √ Teletext Source
ページ20に含まれる内容の要旨
Storing Channels Automatically ENG You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme Channel numbers may not correspond to actual or desired programme Area Asia/W.Europe numbers. However you can sort numbers manually and clear any Auto Store √ √ channels you do not wish to watch. Manual Store √ √ Sort √ √ Name √ √ 1 Press the MENU button. Edit √ √ Result: The main menu is displayed. Move √ √ Enter Return 2 Press the
