ページ1に含まれる内容の要旨
BN68-00689A-00_Eng 3/27/04 9:25 AM Page 1
PDP-MONITOR
(PLASMA DISPLAY PANEL)
PS42D4ST
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Intended for Commercial Use and Operation
ON-SCREEN MENUS
PICTURE IN PICTURE (PIP)
(MULTIPLE DISPLAY CONTROL)
MDC
ページ2に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 2 Warning! Important Safety Instructions ENG The lightning flash and arrow head within the triangle is a CAUTION warning sign alerting you of RISK OF ELECTRIC SHOCK “dangerous voltage” inside DO NOT OPEN the product. The exclamation point within CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT the triangle is a warning sign REMOVE REAR COVER, NO USER SERVICEABLE PARTS alerting you of important INSIDE. REFER SERVICING TO QUALIFIED SERVICE instructions accomp
ページ3に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 3 Important Warranty Information Regarding PDP Format Viewing ENG Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and constantly moving. Displaying stationary graphics and images on screen, such as
ページ4に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 4 User Instructions ENG ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma display panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of this screen when displaying a still image. ◆ Cell Defect The plasma display panel consists of f
ページ5に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 5 User Instructions ENG Checking Parts A Separated Sales Owner’s Instructions Remote Control/ Ferrite Cores for Install CD AAA Batteries Speaker Wire - MDC Software (RS232C) (2EA) MDC Cable A/V Cable A/V Cable (RS232C) (1EA) (1EA) PC Cable Speaker Wires Power Cord (2EA) The PS42D4ST model uses the same MDC program CD used for PS42P3ST model. ➢ TM DNIe (Digital Natural Image engine) This feature bring you more detailed image with 3D noise reduction, de
ページ6に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 6 ENG Contents ◆ FOREWORD ■ Warning! Important Safety Instructions ......................................................... 2 ■ Important Warranty Information Regarding PDP Format Viewing................. 3 ■ User Instructions............................................................................................ 4 ◆ CONNECTING AND PREPARING YOUR DISPLAY ■ Your New Plasma Display Panel................................................................
ページ7に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 7 ENG Contents (continued) ◆ USING YOUR DISPLAY (CONTINUED) ■ Locking the Control buttons........................................................................... 25 ■ Setting the MDC (Multiple Display Control)................................................... 25 ■ Protecting the Screen Burning....................................................................... 26 ■ Displaying the PC Information.....................................................
ページ8に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 8 Your New Plasma Display Panel The actual configuration on your PDP may be different, ➢ ENG depending on your model. Front Panel a c b b a Power Indicator - Power Off; Red SOURCE - Power On; Off - External input selection. - Timer On; Green - Store your settings in the menu. - When the Main menu is displayed on screen, the Main menu is not operated with source key. MENU c Menu display and exit. Remote Control Signal Receiver - VOL + Aim the remote con
ページ9に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 9 Your New Plasma Display Panel The actual configuration on your PDP may be different, ➢ ENG depending on your model. Rear Panel For further details about connection, refer to pages 34~36. ➢ a c e g b d f h i a) RS232C e) VIDEO IN - IN : Used for the MDC function when connecting Video and audio inputs for external devices, such as PC or RS232C output of another PDP. VCR, DVD, video game device or video disc players - OUT : Used for the MDC function whe
ページ10に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 10 Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change sources and adjust the volume ◆ Set up the PDP using the on-screen menu system PDP ON PDP OFF SOUND MODE SELECTION PICTURE MODE SELECTION CURRENT TIME DISPLAY NUMERIC BUTTONS PICTURE STILL ZOOM/PANNING MENU DISPLAY (ONLY PC MODE) NEXT CHANNEL VOLUME INCREASE (NOT AVAILABLE FOR THIS MONITOR) TEMPORARY SOUND SWITCH-OFF EXTERNAL INPUT SELECTION Press it again ,
ページ11に含まれる内容の要旨
BN68-00689A-00_Eng 3/27/04 9:25 AM Page 11 Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: ◆ Purchase the PDP ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ - on the battery against
ページ12に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 12 Installing the Display on the Wall Attachment Panel ENG This wall mount bracket installation guide is for the following models: WMN4230 ☛ This installation guide may be different from the PDP User’s manual. Please refer to the proper installation guide for your product. Installation Notes ◆ Do not install the PDP on any place other than vertical walls. ◆ To protect the performance of the PDP and prevent troubles, avoid the followings: - Do not insta
ページ13に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 13 Installing the Display on the Wall Attachment Panel The exterior of the PDP may be different than the picture. ➢ ENG (Assembly and installation of the plastic hanger is the same.) 1 Remove the screws from the back of the PDP. 2 Use the screws and assemble the plastic hanger. ◆ Please ask the installers to install the wall mount bracket. ☛ ◆ Please be sure to check if the plastic hanger is completely secured on both the left and right side after hangi
ページ14に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 14 Connecting Speakers ENG 1 Remove the screws on the rear of the PDP. 2 Hang the two “T” shaped hangers on the square holes on the rear of the PDP. 3 Tighten the PDP and the speaker bracket using the screws removed from the PDP. When moving your PDP, do NOT hold the speaker connected to your PDP. It may damage the ➢ bracket clamping the speaker and your PDP together and result in a drop of your PDP and a risk of personal damage and injury. 14
ページ15に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 15 Connecting Speakers (continued) ENG Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP. ◆ The speakers MUST have to a power handling capability of 10 watts minimum ➢ (impedance 8Ω). ◆ When you connect the speaker wire to the external speaker out connector, first bind the speaker wire round the ferrite core to secure it. Ferrite Cores The fer
ページ16に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 16 Switching On and Off ENG The mains lead is attached to the rear of your PDP. Front of the PDP 1 Plug the mains lead into an appropriate socket. Result: The Standby indicator on the front of the PDP lights up. The main voltage is indicated on the rear of the PDP and ➢ the frequency is 50 or 60Hz. 2 Press the “ I / ” button on the front of the PDP (or ON() button on the remote control) to switch the PDP on. 3 To switch your PDP off, press the “ I / ” b
ページ17に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 17 Selecting the Color System (Video or S-Video Mode) ENG Preset to the Video or S-Video mode by using the SOURCE button. ➢ Picture If necessary, select the broadcasting standard which best Color System œ œ AUTO √ √ corresponds to your viewing requirements. Mode œ œ Dynamic √ √ Adjust √ √ Color Tone œ œ Normal √ √ 1 Press the MENU button. Size Wide Digital NR œ œ Off √ √ Result: The options available in the Picture group are displayed. Move Sel. Ret
ページ18に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 18 Adjusting the Picture Settings ENG Your PDP has several settings which allow you to control picture quality. Picture Color System œ œ AUTO √ √ Mode œ œ Dynamic √ √ 1 Press the MENU button. Adjust √ √ Result: The options available in the Picture group are Color Tone œ œ Normal √ √ displayed. Size Wide Digital NR œ œ Off √ √ 2 Press the √ button. Move Enter Return 3 Press the ▲ or ▼ button to select Adjust. Press the √ button. Result: The Adjust me
ページ19に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 19 Adjusting the Picture Settings (PC or DVI Mode) Preset to the PC or DVI mode by using the SOURCE button. ➢ ENG 1 Press the MENU button. Picture Result: The options available in the Picture group are Mode œ œ Custom √ √ displayed. Adjust √ √ Color Tone œ œ Custom √ √ 2 Press the √ button. Color Adjust √ √ Size Wide 3 Press the ▲ or ▼ button to select Adjust. Press the √ button. Result: The Adjust menu is displayed. Move Enter Return 4 Press the ▲ or
ページ20に含まれる内容の要旨
BN68-00689A-00_Eng 3/20/04 9:45 AM Page 20 Selecting the Picture Size ENG You can select the picture size which best corresponds to your viewing requirements. Picture Color System œ œ AUTO √ √ Mode œ œ Dynamic √ √ 1 Press the MENU button. Adjust √ √ Result: The options available in the Picture group are Color Tone œ œ Normal √ √ displayed. Size Wide Digital NR œ œ Off √ √ 2 Press the √ button. Move Sel. Return 3 Press the ▲ or ▼ button to select Size. Press the √ button. 4 Select the opti
