ページ1に含まれる内容の要旨
PDP-TELEVISION
(PLASMA DISPLAY PANEL)
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
Picture In Picture (PIP)
Energy Saving
TELETEXT (Option)
SRS TruSurround XT
Digital Natural Image engine
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
BN68-01294E-01
01294E-01_¼±¸_Cover.indd
ページ2に含まれる内容の要旨
User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP can normally operate only under 2000m in height. It might abnormally function at a
ページ3に含まれる内容の要旨
Contents General Information Function Description User Instructions ............................................. 2 Time Features ............................................... 24 Checking Parts ................................................ 4 Language / Blue Screen / Melody / Using the Stand-Base ..................................... 4 Light Effect / Energy Saving / Control Panel ................................................. 5 HDMI Black Level ...........................
ページ4に含まれる内容の要旨
Checking Parts Owner’s Instructions Remote Control/ Power Cord Cloth-Clean AAA Batteries Warranty Card/ Cover-Bottom / Screws (2ea) Ferrite Core for Power Cord Ferrite Core for Power Cord Registration Card/ (Refer to page 37) Safety Guide Manual Sold Separately Antenna Cable Component Cables Audio Cables PC Cable Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable Ferrite Core (Power Cord) ➢ The ferrite core is used to shield the cable from interference. When connecting a cable, open the fer
ページ5に含まれる内容の要旨
Control Panel Front (or Side) Panel 7 The product colour and shape may vary depending on the model. ➢ 1 SOURCE 4 C/P. Displays a menu of all of the available input Press to change channels. In the on-screen sources (TV, Ext.1, Ext.2, Component, PC, and menu, use the C/P. buttons as HDMI). you use the ▲ and ▼ buttons on the remote control. 2 MENU Press to see the on-screen menu of your TV’s 5 (ENTER) features. Press to confirm a selection. 3 + − 6 (Power) button Press to increase
ページ6に含まれる内容の要旨
Connection Panel Rear Panel 1 8 or Cable Television Network 5 or 2 3 4 6 7 The product colour and shape may vary depending on the model. ➢ Whenever you connect an audio or video system to your set, ensure that all elements are ☛ switched off. When connecting an external device, match the colour of the connection terminal to the cable. 1 POWER IN 4 COMPONENT IN Connect the supplied power cord. Audio (AUDIO L/R) and video (Y/PB/PR) inputs for Component. 2 Connecting external Audio Devi
ページ7に含まれる内容の要旨
7 HDMI IN(DVI IN) − Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. − Connect to the HDMI jack of a device with HDMI output. These inputs can also be used (This will result in a blank screen being displayed) as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable DVI IN AUDIO L/R DVI audio outputs for external devices. will be necessary to make this connection. When using the optional HDMI/DVI adapter, 8 ANT IN the DVI analog aud
ページ8に含まれる内容の要旨
Viewing the Remote Control This is a special remote control for the visually impaired persons, and has Braille points on the ➢ POWER, Volume and Channel buttons. The performance of the remote control may be affected by bright light. 1 POWER button d Move to the required menu (turns the TV on and off) option / Adjust an option value respectively 2 Number buttons for direct channel access f Picture freeze 3 One/Two-digit channel g Picture size selection selection i Sub picture (PIP
ページ9に含まれる内容の要旨
Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. Make sure to match the “+” and “–” ends of the ➢ batteries with the diagram inside the compartment. Do not mix battery types, i.e. alkaline and manganese. 3 Close the cover as shown in the figure. Remove the batteries and store them in a cool and dry ➢ place if you won’t be using the remote control for a long time. The remote con
ページ10に含まれる内容の要旨
Viewing the Menus T V Picture 1 Press the MENU button. The main menu is displayed on the screen. Mode : Dynamic Contrast 100 Its left side has five icons: Picture, Sound, Channel, Setup, Brightness 45 and Input. Sharpness 75 Colour 55 2 Press the ▲ or ▼ button to select one of the icons. Tint G50 R50 Press the ENTER button to access the icon’s sub-menu. Colour Tone : Cool1 3 Press the ▲ or ▼ button to move to items in the menu.
ページ11に含まれる内容の要旨
Plug & Play Feature When the television is initially powered on, several basic Plug & Play customer settings proceed automatically and subsequently. The following settings are available. Start Plug & Play. If you accidentally select the wrong country for your TV, the ☛ characters on the screen may be wrongly displayed. OK 1 If the television is in standby mode, press the POWER button Enter Exit on the remote control. The message Start Plug & Play is displayed. Press the ENTER button
ページ12に含まれる内容の要旨
If you want to reset this feature … T V Setup Plug & Play 1 Press the MENU button to display the menu. Language : English 2 Press the ▲ or ▼ button to select Setup, then press the Time ENTER button. Game Mode : Off Blue Screen : Off 3 Press the ENTER button again to select Plug & Play. Melody : Off The message Start Plug & Play is displayed. PC More Move Enter Return Viewing an External Signal Sources You can switch between viewing signals from connected T V
ページ13に含まれる内容の要旨
Editing Device Names You can give a name to the external source. T V Input 1 Press the MENU button to display the menu. Source List : TV Edit Name 2 Press the ▲ or ▼ button to select Input, then press the ENTER button. 3 Press the ▲ or ▼ button to select Edit Name, then press the ENTER button. 4 Press the ▲ or ▼ button to select the external source to be edited, then press the ENTER button. Move Enter Return 5 Select the required device by pressing ▲ or ▼, then press the ENTER but
ページ14に含まれる内容の要旨
Storing Channels Manually You can store television channels, including those received via T V Channel cable networks. Country : Belgium When storing channels manually, you can choose: Auto Store Manual Store Whether or not to store each of the channels found. Channel Manager The programme number of each stored channel which you wish Sort to identify. Name Fine Tune 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then
ページ15に含まれる内容の要旨
Adding / Locking Channels Using the Channel Manager, you can conveniently lock or add T V Channel channels. Country : Belgium Auto Store 1 Press the MENU button to display the menu. Manual Store 2 Press the ▲ or ▼ button to select Channel, then press the Channel Manager ENTER button. Sort Name 3 Press the ▲ or ▼ button to select Channel Manager, then Fine Tune press the ENTER button. Adding channels Move Enter Return Using the Channel List, you can add chan
ページ16に含まれる内容の要旨
Sorting the Stored Channels This operation allows you to change the programme numbers T V Channel of the stored channels. Country : Belgium This operation may be necessary after using the auto store. Auto Store Manual Store 1 Press the MENU button to display the menu. Channel Manager 2 Press the ▲ or ▼ button to select Channel, then press the Sort Name ENTER button. Fine Tune 3 Press the ▲ or ▼ button to select Sort, then press the ENTER button. Move Enter Re
ページ17に含まれる内容の要旨
Fine Tuning Channel Reception If the reception is clear, you do not have to fine tune the T V Channel channel, as this is done automatically during the search and Country : Belgium store operation. Auto Store Manual Store If the signal is weak or distorted, you may have to fine tune the Channel Manager channel manually. Sort 1 Press the MENU button to display the menu. Name Fine Tune 2 Press the ▲ or ▼ button to select Channel, then press the ENTER button. Mov
ページ18に含まれる内容の要旨
Changing the Picture Standard You can select the type of picture which best corresponds to T V Picture your viewing requirements. Mode : Dynamic Contrast 100 1 Press the MENU button to display the menu. Brightness 45 2 Press the ENTER button to select Picture. Sharpness 75 Colour 55 3 Press the ENTER button again to select Mode. Tint G50 R50 4 Select the required mode by pressing the ▲ or ▼ button, then Colour Tone : Cool1 pres
ページ19に含まれる内容の要旨
Configuring Detailed Settings on the Picture You can set detailed picture settings. T V Picture 1 Press the MENU button to display the menu. More Detailed Settings 2 Press the ENTER button to select Picture. Size : Auto Wide 3 Press the ▲ or ▼ button to select Detailed Settings, then Screen Mode : 16:9 Digital NR : Auto press the ENTER button. Active Colour : Off 4 Select the required option by pressing the ▲ or ▼ button, then DNIe : On Reset : OK press the ENTER button.
ページ20に含まれる内容の要旨
Selecting the Picture Size You can select the picture size which best corresponds to your T V Picture viewing requirements. More Detailed Settings 1 Press the MENU button to display the menu. Size : Auto Wide 2 Press the ENTER button to select Picture. Screen Mode : 16:9 Digital NR : Auto 3 Press the ▲ or ▼ button to select Size, then press the ENTER Active Colour : Off button. DNIe : On Reset : OK 4 Select the required option by pressing the ▲ or ▼ button, then press th
