ページ12に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 10 Installing Batteries in the Remote Control 1 Slide the cover out completely. 2 Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3 Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batterie
ページ13に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 11 Switching On and Off The mains lead is attached to the rear of your set. 1 Plug the mains lead into an appropriate socket. Result: The standby indicator lights up on the front panel. The main voltage is indicated on the rear of your set and the frequency is 50 or 60Hz. 2 Press the POWER button on the front of the panel. Result: The programme that you were watching last is reselected automatically. 3 Press the numeric button (0~9) or channel up/d
ページ14に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 12 Becoming Familiar with the Remote Control The remote control is used mainly to: Change channels and adjust the volume. Set up your set using the on-screen menu system. The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the - next stored channel. Used to display the - previous stored channel. to Used to display the corresponding channels. For double digit chan
ページ15に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 9:00 AM Page 13 Plug and Play When the set is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the set is in standby mode, press the POWER button on the remote control. Result: The message Start Plug & Play. is displayed. It appears for a little while, and then the Language menu is automatically displayed. 2 Select the appropriate language by pressing the or button. The avai
ページ16に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 9:00 AM Page 14 Plug and Play If you want to reset this feature... 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Setup. Press the ENTER button. Result: The options available in the Setup group are displayed. 3 The Plug & Play is selected. 4 Press the ENTER button. Result: The message Start Plug & Play. is displayed. 5 For further details on how to set, refer to the previous page. This function doesn't work when so
ページ17に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 9:00 AM Page 15 Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options availabl
ページ18に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 9:00 AM Page 16 Storing Channels Manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options available in the Channel group are displayed. 3 Pr
ページ19に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 9:00 AM Page 17 Storing Channels Manually 8 If you know the number of the channel to be stored, Press the or button to select Channel and then press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the or button. Press the button to select channel. Programme : P 1 Select the required number by pressing the or button and Colour System : AUTO then press the ENTER button. Sound System : BG Channel : C 2 If there
ページ20に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 12:06 PM Page 18 Editing the Channels You can exclude the channels you chose from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Channel. Press the ENTER button. Result: The options available in the Channel group
ページ1に含まれる内容の要旨
LE32M6 / LE40M6
LCD TV
BN68-00956A-00Cover.qxd 7/19/05 8:49 AM Page 1
LCD TV
LE32M6
LE40M6
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(
ページ2に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 2 Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Digital Ready TV: When you Although digital broadcasting must be in the select the regular screen (4:3) wide screen (16:9) HD format, broadcasters mode to watch an SD-grade sometimes show programs made originally digital broadcast (and the Set-Top in the regular screen format (4:3) by Box output is 480p). converting the signals into digital for
ページ3に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 3 • Integrated Digital TV Although digital broadcasting must be in the (Wide-screen): When the TV wide screen (16:9) HD format, broadcasters receives SD-grade (regular) sometimes show programs made originally broadcasting signals (receives in the regular screen format (4:3) by 480p regular signals). converting the signals into digital form, in which case the left and right side edges of • Digital Ready TV (wide-screen): the screen are cropped. dig
ページ4に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 2 Contents CONNECTING AND PREPARING YOUR TV Viewing the Control Panel ......................................................................................... 4 Viewing the Connection Panel................................................................................... 5 - Connecting an Aerial or Cable Television Network ............................................... 6 - Connecting Component Devices (DTV/DVD) ..................................
ページ5に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 3 Contents SETTING THE SOUND Setting the TruSurround XT (SRS TSXT) .......................................................... 36 Adjusting the Volume Automatically.................................................................... 37 Connecting Headphones .................................................................................... 38 Selecting the Internal Mute ...............................................................................
ページ6に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 4 Viewing the Control Panel SOURCE (Power) Press to turn the TV on and off. Displays a menu of all of the available input sources ( TV, Ext. 1, Ext. 2, AV, S-Video, Power Indicator Component, PC, HDMI). Blinks and turns off when the power is on and lights Also used to confirm your choice on the up in stand-by mode. on-screen menu. Remote Control Sensor MENU Aim the remote control towards this spot on the TV. Press to see an on-screen menu of Light
ページ7に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 5 Viewing the Connection Panel [Rear Panel Jacks] [Side Panel Jacks] Power Input Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable. English-5
ページ8に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 6 Viewing the Connection Panel Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial - A cable television network - A satellite network Connecting Component Devices (DTV/DVD) - Connect component video cables to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video
ページ9に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 7 Viewing the Connection Panel Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs). - No sound connection is needed for an HDMI to HDMI connection. What is HDMI? - HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. - “Multim
ページ10に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 8 Viewing the Remote Control (All Functions Except Teletext) Display selected input source Television Standby button and battery status (Refer to page 11) Picture-In-Picture On / Off (Refer to pages 31-32) Picture freeze Make the remote control works (Refer to page 25) for TV, VCR, CATV, DVD, STB (Refer to pages 55~57) Number buttons for direct channel access Selects the TV mode directly Previous channel (Refer to page 46) Temporary sound switch-o
ページ11に含まれる内容の要旨
01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 9 Viewing the Remote Control (Teletext Functions) Teletext cancel Teletext hold Exit from the teletext display P : Teletext next page P : Teletext previous page Teletext mode selection (LIST/FLOF) Teletext display/mix both teletext information and the Teletext reveal normal broadcast Teletext index Teletext sub page Teletext store Teletext size selection Teletext Function : Refer to pages 52-54 for details English-9
