ページ1に含まれる内容の要旨
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Contacte con SAMSUNG WORLD WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención
al Cliente
Country Customer Care Center Web Site Address
Samsung Electronics Canada Inc., Customer Service 55
Standish Court Mississauga, Ontario L5R 4B2 Canada
CANADA 1-800-SAMSUNG (7267864) www.
ページ2に含まれる内容の要旨
Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on none
ページ3に含まれる内容の要旨
User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 23 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. Altitude The PDP can only operate normally at heights under 6500ft. Heat on the top of the P
ページ4に含まれる内容の要旨
Contents General Information Channel Control List of Features ..................................................................5 Selecting the Antenna ......................................................36 Accessories ........................................................................5 Clearing Scrambled Channels - Digital ............................36 Viewing the Control Panel ..................................................6 Adding and Erasing Channels ...........................
ページ5に含まれる内容の要旨
General Information List of Features • Adjustable picture settings that can be stored in the TV’s memory. • Automatic timer to turn the TV on and off. • A special sleep timer. • V-Chip function. • Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed. • Excellent Picture Quality - DNIe technology provides life-like clear images. • SRS TruSurround XT - SRS TruSurround XT provides a virtual Dolby sur
ページ6に含まれる内容の要旨
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. ➢ The product color and shape may vary depending on the model. 1 SOURCE 6 POWER Toggles between all the available input sources Press to turn the TV on and off. (TV, AV1, AV , S-Video, Component1, Component , Power Indicator PC, HDMI1, HDMI )
ページ7に含まれる内容の要旨
Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 9-15. The product color and shape may vary depending on the model. 1 POWER IN 7 ANT IN Connect the supplied power cord. Uses a 75Ω Coaxial connector for an Air/Cable Network. 2 DIGITAL AUDIO OUT (OPTICAL) Connect to a Digital Audio component. 8 SERVICE For service only. 3
ページ8に含まれる内容の要旨
Remote Control You can use the remote control up to a distance of about feet from the TV. 1 POWER # SOURCE Turns the TV on and off. Press to display all of the available video sources. 2 TV Selects the TV mode directly. $ PRE-CH Tunes to the previous channel. 3 NUMERIC BUTTONS % CH Press to directly select a channel. W.LINK Press to change channels. 4 – W.LINK ^ RETURN Press to select additional channels Returns to the previous menu. (digital and analog) being broadcast b
ページ9に含まれる内容の要旨
Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. ➢ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. ➢ Do not mix battery types, i.e. alkaline and manganese. Close the cover as shown in the figure. ➢ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can
ページ10に含まれる内容の要旨
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT IN terminal on the back of the TV. ➢ Because this TV is cable-ready, you do not need a cable box to view ANT IN unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANT OUT terminal on your cable box. ➢ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”. ANT
ページ11に含まれる内容の要旨
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1 Connect an HDMI Cable TV Rear Panel DVD Player or Cable Box / between the HDMI IN(1 or 2) Satellite receiver (Set-Top Box) jack on the TV and the HDMI jack on the DVD Player or Cable Box / Satellite receiver (Set-Top Box). HDMI Cable (Not supplied) What is HDMI? •
ページ12に含まれる内容の要旨
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box / Satellite receiver (Set-Top Box) to your TV. 1 Connect Component Cables TV Rear Panel between the COMPONENT IN (1 or 2) [Y, PB, PR] DVD Player or Cable Box/ jacks on the TV and the Satellite receiver (Set-Top Box) COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box / Satellite receiver(Set-Top Box). Conn
ページ13に含まれる内容の要旨
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages ~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Connect an Antenna Cable between the ANT OUT TV Rear Panel TV Side Panel terminal on the VCR and the A
ページ14に含まれる内容の要旨
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV. 1 Connect an Optical Cable TV Rear Panel between the DIGITAL AUDIO OUT (OPTICAL) jacks on Digital Audio System the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System. When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) terminal: Decrease the volume of the TV, and adjust the volume level with
ページ15に含まれる内容の要旨
Connecting a PC Using the D-Sub Cable Using the D-Sub Cable 1 Connect a D-Sub Cable TV Rear Panel between PC IN [PC] jack on the TV and the PC output jack on your computer. PC Connect a PC Audio Cable between PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) Using the HDMI/DVI Cable Using the HDMI/DVI Cable 1 Connect a HDMI/DVI cable TV Rear Panel between the HDMI IN 2 jack on the TV and
ページ16に含まれる内容の要旨
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. ➢ It may take a while before you see a full picture. Plug & Play Feature The first time you turn on your new TV, choose your basic settings for language, input source and channels, and time of day using the plug and play feature. The TV will store these settings in memory. Storing the channels in memory will allow you to scan the stored channels rather than have to
ページ17に含まれる内容の要旨
Auto Program 5 The TV will begin memorizing all of the available channels. Auto Program in Progress. ➢ To stop the search before it has finished, press the ENTER button with Stop DTV Air : 5 Air : 3 DTV Cable : -- Cable : -- Air 67 selected. 68% Stop After all the available channels are stored, the TV starts to remove scrambled Enter Skip channels(see page37). The Auto program menu then reappears. Press the ENTER button when channel memorization is complete. Auto Program Clock Mode menu
ページ18に含まれる内容の要旨
If you want to reset this feature... 1 Press the MENU button to display the menu. T V Setup Press the ▲ or ▼ button to select Setup, then press the ENTER button. Plug & Play ► Language : English ► Time ► Press the ENTER button to select Plug & Play. For further details on setting up V-Chip ► options, refer to the pages 16~17. Caption ► External Settings ► The Plug & Play feature is only available in the TV. ➢ Entertainment : Off ► ▼ More Move Enter Return Plug & Play Menu language, S
ページ19に含まれる内容の要旨
Adjusting the Volume Using the Volume Buttons 1 Press the VOL or VOL button to increase or decrease the volume. W.LINK W.LINK Using the Mute Button At any time, you can cut off the sound using the MUTE button. 1 Press MUTE and the sound cuts off. Mute will displayed on the screen. To turn mute off, press the MUTE button again, or simply press the VOL or VOL button. W.LINK W.LINK Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easil
ページ20に含まれる内容の要旨
Viewing the Menus 1 With the power on, press the MENU button. T V Picture The main menu appears on the screen. Its left side has five icons: Mode : Standard ► Cell Light 7 Picture, Sound, Channel, Setup, Input. Contrast 95 Brightness 45 Sharpness 50 Color 50 Tint(G/R) G 50 R 50 Press the ▲ or ▼ button to select one of the icons. ▼ More Then press the ENTER button to access the icon’s sub-menu. Move Enter Exit Press the EXIT
