ページ1に含まれる内容の要旨
Install Programs
SyncMaster 403Tn
ページ2に含まれる内容の要旨
Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This
ページ3に含まれる内容の要旨
Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. This may cause an electric shock or fire. Do not connect too many extension cords or plugs to an outlet. This may
ページ4に含まれる内容の要旨
Set down the monitor carefully. The monitor could be damaged or broken. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. Leave a space for ventilation between the product and the wall. Poor ventilation may cause the interior temperature to rise and lead
ページ5に含まれる内容の要旨
Contact the Service Center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire. Others Do not remove cover (or back). This may cause an electric shock or fire. Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from i
ページ6に含まれる内容の要旨
Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor. This may cause malfunction, an electric shock or fire. If a foreign substance enters the monitor, unplug the power cord and contact the Service Center. Do not use or store inflammable substances near the monitor. This may cause an explosion or fire. Never insert anything metallic into t
ページ7に含まれる内容の要旨
To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not use the monitor where it may be exposed to strong vibrations. Exposure to strong vibrations may be fire hazard and shorten the life of the monitor. When moving the monitor, turn the power switch off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected devices, are disconnected before moving the monitor. Failure to disconnect
ページ8に含まれる内容の要旨
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor Manual User's Guide, MDC software, Warranty Card Quick Setup Guide Natural Color software, (Not available in all locations) MagicNet software Cable
ページ9に含まれる内容の要旨
D-Sub Cable Power Cord RS232C Cable LAN Cable Sold separately Wall Mount KIT Speaker Set Stand KIT Screw (22EA) Bracket VESA Bracket MACHINE : M5 x L22 DVI Cable Others Remote Control Batteries (AAA X 2) Cover-hole
ページ10に含まれる内容の要旨
BNC to RCA Screw (4EA) Semi Stand Adapterjack MACHINE : M4 x L15 Front 1.MENU 6.PIP 2. Navigate button (Up-Down button) 7. Power button 3. Adjust button (Left-Right button)/ 8. Power indicator Volume button 4. ENTER 9. Remote Control Sensor 5. SOURCE 1. MENU Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. Navigate button (Up-Down button) Moves from one menu item to another vertically or adjusts selecte
ページ11に含まれる内容の要旨
• AV / S-Video : PC / BNC / DVI Mode • Component : PC / DVI Mode 7. Power button Use this button to turn the monitor on and off. 8. Power indicator Power Indicator shows PowerSaver mode by green blinking. 9. Remote Control Sensor Aim the remote control towards this spot on the Monitor. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unatten
ページ12に含まれる内容の要旨
3. RS232C OUT/IN (RS232C Serial PORT): MDC(Multiple Device Control) Program Port 4. PC IN(RGB) (PC Video Connection Terminal) : Using D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC) 5. DVI IN(HDCP) (PC Video Connection Terminal) : Using DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC) 6. PC/DVI/BNC AUDIO IN (PC/DVI/BNC Audio Connection Terminal (Input)) 7. COMPONENT AUDIO IN [R-AUDIO-L](Component Audio Connection Terminal (Input)) 8. BNC/COMPONENT OUT (BNC/Component Connection Termina
ページ13に含まれる内容の要旨
15. AV IN [R-AUDIO-L](Monitor Audio Connection Terminal (Input)) The number of monitor that can be connected to loopout may be different under the circumstance such as cable, signal source, etc. With a cable which there is no degradation or signal source ten monitors can be connected. 16. DIGITAL AUDIO OUT (Digital Audio Connection Terminal) 17. USB (USB Connection Terminal) (Keyboard / Mouse, Mass Storage Device Compatible.) 18. LAN (LAN Connection Terminal) (MS Internet Explorer) 1
ページ14に含まれる内容の要旨
1. POWER 2. MagicNet buttons 3. +100 4. VOL 5. MUTE 6. AUTO 7. MENU 8. ENTER 9. PRE-CH 10. CH/PAGE 11. SOURCE 12. INFO 13. EXIT 14. Up-Down Left-Right buttons 15. P.MODE (M/B) 16. STILL 17. BBE 18. MTS 19. PIP 20. SOURCE 21. SIZE 22. SWAP 23. 24. 25. 26. MagicNet Remote Control 1. POWER Use this button for turn the monitor on and off. 2. MagicNet buttons - Used for MagicNet. Alphanumeric: Used to enter the Internet address. DEL : Functions as the backspace.
ページ15に含まれる内容の要旨
7. MENU Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 8. ENTER Activate a highlighted menu item. 9. PRE-CH This button is used to return to the immediately previous channel. - This fuctions does not work for this monitor. 10. CH/PAGE Selects channels or page. - This fuctions does not work for this monitor. 11. SOURCE Push the button, selects the Video source changes. 12. INFO Current picture information displa
ページ16に含まれる内容の要旨
21. SIZE You can switch the Picture Size. 22. SWAP Swapping the contents of the PIP and main image. The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window. 23. Rewind 24. Stop 25. Play/Pause 26. Fast forward
ページ17に含まれる内容の要旨
Remote Control PHOTO When the files are selected in the library list Previous file Stop slideshow / View the bottom menu bar Slideshow Next file When you see no menu in a zoomed-in picture Move up to the top of the image Move down to the bottom of the image Move to the left of the image Move to the right of the image MUSIC When the files are selected in the library list File view on the curs
ページ18に含まれる内容の要旨
Move to the previous page (when the cursor is placed at the bottom, it will move to the first file of the next page) Move to the next page (when the current page is the first, it will move to the last page) Move to the previous page (when the current page is the last, it will move to the first page) File view on the cursor position Play MOVIE When the files are selected in the library list Move to the top (when the cursor is placed at the top, it will go back to
ページ19に含まれる内容の要旨
Move to the previous page (when the current page is the last, it will move to the first page) File view on the cursor position PDF Move to the top Move to the bottom Move to the next page Move to the previous page Exit PDF Excel Move to the upper cell Move to the lower cell Move to the left cell Move to the right cell Move to the next page Move to the previous page Move to the right sheet Move to the left sheet Exit
ページ20に含まれる内容の要旨
Move to the next page Move to the previous page Slideshow Exit Power point Power point Slideshow Stop slideshow Move to the top Move to the bottom Move to the next page Move to the previous page Exit Power point Word Move to the top Move to the bottom Move to the next page Move to the previous page Exit Word HTML / Ineternet Move the mouse cursor up Move the mouse cursor down Move the mouse cursor to the le
