ページ1に含まれる内容の要旨
3/4 Ton Heavy Duty
Wheel Dolly
Operating Instructions & Parts Manual
BH8075
SFA Companies ©2004
10939 N. Pomona Ave. Kansas City, MO 64153
816-891-6390
sales@blackhawk-automotive.com
- Before using this product, read this manual and follow all its Safety Rules and Operating Instructions
Made in PRC
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Warranty P2 Save These Instructions P3 Product Description P3 Specifications P3 Safety Instructions P4 Assembly P4 Operation P5 Maintenance P5 Troubleshooting P5 Replacement Parts P6 ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied warranty not excluded hereby. Per
ページ3に含まれる内容の要旨
SAVE THESE INSTRUCTIONS For your safety, read and understand the information contained within. The owner and operator shall have an under- standing of this product and safe operating procedures before attempting to use this product. Instructions and Safety information shall be conveyed in the operators native language before use of this product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt
ページ4に含まれる内容の要旨
SAFETY INSTRUCTIONS (refer to Figure1 for location of components) BEFORE USE 1. Inspect before each use. Do not use if bent, broken, leaking or cracked components are noted. Ensure the casters and lifting arms move freely. Check and tighten any loose assemblies. 2. Verify that the product and the application are compatible, if in doubt call Blackhawk Automotive Technical Service (816)891-6390. 3. Read, understand and follow vehicle manufacturer’s recommended tire change procedures. 4. With hydra
ページ5に含まれる内容の要旨
OPERATION 1. Set emergency brake, chock tires of diagonally opposed wheel(s) in both directions AND take every precaution necessary to ensure set up is stable and prevent inadvertent vehicle movement. 2. When tire & wheel assembly are ready to remove, position wheel dolly to accept tire & wheel assembly and secure load with restraint. 3. Use jack handle to turn release valve clockwise until tight. DO NOT OVERTIGHTEN. Insert hydraulic unit handle into handle sleeve of hydraulic unit and pump unti
ページ6に含まれる内容の要旨
REPLACEMENT PARTS (See attached exploded drawing) When ordering replacement parts, please refer to the model number / serial number found on the product, then give the part number and description. Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of the wheel dolly are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and description be
ページ7に含まれる内容の要旨
memo.
ページ8に含まれる内容の要旨
memo.
