ページ1に含まれる内容の要旨
26” HD-LCD TV/DVD Combo with High Definition ATSC Tuner
FXM-2611C
SERVICE MANUAL
20061220
ページ2に含まれる内容の要旨
Important Service and Safety Information Prior to using this service manual, please ensure that you have carefully followed all the procedures outlined in the user's manual for this product. (1) Read all of these instructions. (2) Save these instructions. (3) Follow all warnings and instructions marked on the product. (4) Unplug this product from the wall outlet bef
ページ3に含まれる内容の要旨
Important Service and Safety Information Service work should be performed only by qualified service technicians familiar with all safety checks and these service guidelines: ELECTRIC SHOCK HAZARD Always disconnect AC power before servicing! Never modify any circuit! Never insert any objects into the holes in the TV case! ELECTROSTATIC DISCHARGE (ESD) Components inside an LCD or plasma TV are sensitive to static electricity. Before servicing the TV, follow these guidelines: • Av
ページ4に含まれる内容の要旨
Table of Contents 1. Specifications ...................................................................................................................................... 5 2. Operation............................................................................................................................................ 7 3. Troubleshooting Flow Chart................................................................................................................ 13 4. Polaroid Display Cel
ページ5に含まれる内容の要旨
1. Specifications FXM-2611C Specifications: TFT-LCD Resolution 1366x768 TFT-LCD Screen Size 26 inches Laser Wavelength 780/650 nm Video System NTSC Frequency Response 20Hz-20kHz ±2.5dB Audio Signal-to-noise Ratio ≥85dB Audio distortion + noise ≤70dB (1kHz) Channel Separation ≥70dB (1kHz) Dynamic Range ≥80dB (1kHz) 0.2 Audio Out Analog Audio Out Out Level: 1.5V± , Load: 10K Ω 1.0 Out Level: 1V ±0.1, Load: 75 Ω P-P Video Out Video Out Unbalanced Negative Power AC110-220V 50/60
ページ6に含まれる内容の要旨
Discs Formats Supported By This Player: DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) Audio + Video 242min(SS-DL) DVD 12cm (movies) 266min(DS-SL) 484min(DS-DL) CD Audio 12cm 74min JPEG Still Photographs 12cm • The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. • The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but playback of CD-R or CD-RW discs created on a computer r
ページ7に含まれる内容の要旨
2. Operation Front and Right View: (1) 26" Color TFT screen - Offers a crystal clear image. (2) INPUT button - Press to enter the Input menu and then use the buttons to select mode: Tuner, AV1 (Composite 1), AV2 (Composite 2), AV3 (Component 1), AV4 (Component), VGA, HDMI, DVD, then press the Enter button to enter the selected mode. (3) MENU button - Press to enter or exit system setup menu. (4) CH ▲/ ▼button - In TV mode, press to select channels. In setup menu, the same funct
ページ8に含まれる内容の要旨
Rear View: (1) Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks - Connectors for the Y/Pr(Cr)/Pb(Cb) input in AV3 (Component) mode. (2) Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks - Connectors for the Y/Pr(Cr)/Pb(Cb) input in AV4 (Component) mode. (3) Video and L/R audio Input Jacks - Connectors for the audio and video signal input in AV1 (Composite) mode. (4) Video/S-VIDEO and L/R audio Input Jacks - Connectors for the audio and video/S-Video signal input in AV2 (Composite) mode. The Video a
ページ9に含まれる内容の要旨
Remote Control – General: Installing Batteries Using Remote control Push the back cover to open the battery Point the remote control no more than 7 meters from compartment. the remote control sensor and within about 60 degrees of the front of the unit. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. The operating distance may vary depending on the Press the back cover to close it. surrounding bright
ページ10に含まれる内容の要旨
Remote Control – TV Mode: (1) POWER button - Press to enter or exit the standby mode. (2) 0~9 Number buttons - Press to select numbers. (3) MTS button - In TV mode, press to shift among SAP, Mono or Stereo mode. (4) VOL +/- button - Press to increase or decrease the volume. (5) MUTE button - Press to turn on or off the speaker output. (6) Input button - Press to enter the Input menu, then use the▲▼button to select mode: Tuner, AV1 (Composite), AV2 (Composite), AV3 (Component),
ページ11に含まれる内容の要旨
Remote Control – DVD Mode: (1) Play button - Press to play the disc in DVD mode. (2) Pause button - In DVD mode, press to pause the playback or start step frame by frame playback. Press the PLAY button to resume normal playback. (3) Fast Reverse button - In DVD mode, press to search backward (4) Fast Forward button - In DVD mode, press to search forward. (5) 0~9 Number buttons - Press to select numbers. (6) Direction buttons ( ▲▼ ◄►) - In the setup menu, press the ▲▼button to
ページ12に含まれる内容の要旨
Moving the DVD Disc Tray: CAUTION: Before removing or installing the DVD disc tray, unplug the power supply cord. This unit is designed with a movable DVD Disc Tray. The Disc Tray can be installed in three different positions giving you the ability to maximize space and convenience. Follow the procedure (below) to remove and reinstall. Remove the DVD Disc Tray: Step 1: Open the back cover by sliding the left rear panel of the unit outward. Step 2: Remove the DVD disc tray. • Loos
ページ13に含まれる内容の要旨
3. Troubleshooting Flow Chart START Power on N Does LED 1. Check connection between Power Board and Main Board change color? 2. Check Power Board output voltage Y N 1. Check connection between Power Board and LCD Module Does Backlight 2. Check Main Board J32 Backlight Control power on? Y N 1. Check LVDS connector Does OSD appear? Y N 1. Check connection between Remote Board and Main Board 2. Check ATMA
ページ14に含まれる内容の要旨
A 1. Check CAS-220 N Do channels 2. Check connect circuit between tuner and CAS-220 save correctly? 3. Check control circuit between main chip (ZR39660) and CAS-220 Y 1. Check video and audio switch chip (FASV330/331, CD4052) N and relevant circuit Can you change 2. Check control circuit between main chip and switch chip sources? Y NOTE: Some Inputs don’t support SRS mode N Can you change 1. Check AP8206AA chip SRS mode? 2. Check control circuit bet
ページ15に含まれる内容の要旨
4. Polaroid Display Cell Defect Specification In some cases, a panel may have defective cells that cannot be controlled. These defective cells can be categorized into two types; (1) Non-lighting or dark cell defect: defect in which the cell is always off (2) Non-extinguishing or bright cell defect: defect in which the cell is always on The Polaroid Display Cell Defect Specifications below define the allowed limits for display cell defects and are used as the criteria in determining whe
ページ16に含まれる内容の要旨
5. Before Returning This Product to the User Before returning this product to the user, always perform the following safety checks: (1) Inspect all wiring to be sure no wires are pinched between the chassis or any metal parts. (2) Inspect all protective devices for proper installation, including non-metallic controls, insulation materials, cabinet backs, compartment covers, and shields. (3) Verify that no shock hazard exists on any part of the chassis, especially any metal components includ
ページ17に含まれる内容の要旨
6. Disassembly Procedure Note: Before disassembly of any part the TV, make sure the power is OFF, and the power cord is removed from the wall outlet. Allow time for power within all system boards to discharge before you begin disassembly. Never insert any objects into the vent holes in the TV case. Note: Before returning this product to the end user, you must follow the steps outlined in the section, Before Returning This Product to the User, on page 16. This procedure ensures that the
ページ18に含まれる内容の要旨
Rear Cover Removal (1) Lay TV flat on workbench. Be careful to protect the front bezel and LCD screen from being scratched. Use protective cloth between work bench and TV front. (2) Remove back covers A, B, and C. A C B (3) Remove DVD Player (A), Cable (B), and Stand Cover (C). B C A 18
ページ19に含まれる内容の要旨
(4) Remove six (6) screws from the TV Stand (A) and remove the stand from the TV. A A (5) Remove all screws from the rear cover (Location A). A A A (6) Remove all screws from the rear panel label area (A) and remove rear cover. A (7) View after rear cover removal: 19
ページ20に含まれる内容の要旨
Main Board Removal and Replacement (1) DVD Module Board (2) Power Board (3) Main Board (4) Control Button Board (5) Speakers Note: Before disassembly of any part the TV, make sure the power is OFF, and the power cord is removed from the wall outlet. Allow time for power within all system boards to discharge before you begin disassembly. Never insert any objects into the vent holes in the TV case. (1) Remove rear cover and baffles as shown in the section, Disassembly Proce
