ページ1に含まれる内容の要旨
®
P2V
® ™
Pentium II/Celeron Motherboard
USER’S MANUAL
ページ2に含まれる内容の要旨
USER'S NOTICE No part of this manual, including the products and software described in it, may be repro- duced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup pur- poses, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
ページ3に含まれる内容の要旨
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support Tel (English): +886-2-2894-3447 ext. 706 Tel (Chinese): +886-2-2894-3447 ext. 111 Fax: +886-2-2895-9254 Email: tsd@asus.com.tw Newsgroup: news2.asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL (America) Marketing Address: 6737 Mowry Avenue,
ページ4に含まれる内容の要旨
CONTENTS I. INTRODUCTION 7 How this Manual is Organized ........................................................... 7 Item Checklist ..................................................................................... 7 II. FEATURES 8 Features of the ASUS P2V Motherboard ............................................ 8 The ASUS P2V Motherboard ........................................................ 9 III. INSTALLATION 10 Layout of the ASUS P2V Motherboard ........................................
ページ5に含まれる内容の要旨
CONTENTS Chipset Features Setup ................................................................ 44 Details of Chipset Features Setup.......................................... 44 Power Management Setup........................................................... 47 Details of Power Management Setup .................................... 47 PNP and PCI Setup ..................................................................... 50 Details of PNP and PCI Setup ..........................................
ページ6に含まれる内容の要旨
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
ページ7に含まれる内容の要旨
I. INTRODUCTION How this Manual is Organized This manual is divided into the following sections: I. Introduction: Manual information and checklist II. Features: Information and specifications concerning this product III. Installation: Instructions on setting up the motherboard IV. BIOS Software: Instructions on setting up the BIOS software V. Support Software: Information on the included support software Item Checklist Please check that your package is complete. If you discover damaged or missi
ページ8に含まれる内容の要旨
II. FEA TURES Specifications II. FEATURES Features of the ASUS P2V Motherboard The ASUS P2V is carefully designed for the demanding PC user who wants ad- vanced features processed by the fastest CPU. ® TM • Multi-Speed: Supports Intel Pentium II (233 to 500MHz) and Celeron (266MHz and faster) processors. • Multi-Cache: Supports processors with or without Pipelined Burst Level 2 cache. • VIA Chipset: Features VIA’s VT82C693 chipset with I/O subsystems and front-side bus (FSB) platform, which boos
ページ9に含まれる内容の要旨
II. FEATURES The ASUS P2V Motherboard ATX Power CPU Connector Slot 1 Chipset 3 DIMM Sockets T: PS/2 Mouse B: PS/2 Keyboard T: USB Port 1 B: USB Port 2 B: COM 1 T: Parallel B: Serial B: COM 2 Universal Folding Retention Mechanism CPU Thermal Sensor Connector Accelerated Graphics Port Wake-On-LAN Connector 4 PCI Slots Programmable 2Mbit Flash EEPROM Hardware Monitoring ASIC 3 ISA Slots ASUS P2V User’s Manual 9 II. FEA TURES Motherboard Parts
ページ10に含まれる内容の要旨
III. INST ALLATION Board Layout III. INSTALLATION Layout of the ASUS P2V Motherboard PWR_FAN TOP: CPU_FAN Mouse PS/2 BOTTOM: Keyboard TOP: USB 1 USB BOTTOM: USB 2 BUS FREQ FS3 FS2 FS1 FS0 VIA AGPFS VT82C693 Chipset VIO JTCPU Accelerated Graphics Port Wake-On-LAN Connector PCI Slot 1 Multi-I/O CR2032 3V Lithium Cell (CMOS Power) PCI Slot 2 CLRTC PCI Slot 3 VIA VT82C596A CHASIS PCIset BF3 BF2 JTPWR PCI Slot 4 BF1 BF0 ISA Slot 1 ASUS Hardware R Monitor ASIC CHA_FAN ISA Slot 2 Infrared Connector IDE
ページ11に含まれる内容の要旨
III. INSTALLATION Jumpers 1) KBPWR p. 12 Keyboard Power 2) AGPFS p. 13 AGP Frequency Selection 3) VIO p. 13 Voltage Input/Output Selection 4) FS0, FS1, FS2, FS3 p. 14 CPU External Clock (BUS) Frequency Selection 5) BF0, BF1, BF2, BF3 p. 14 CPU Core:BUS Frequency Multiple Expansion Slots/Sockets 1) System Memory p. 17 System Memory Support 2) DIMM Sockets p. 18 DIMM Memory Module Support 3) CPU Slot 1 p. 19 Pentium II/Celeron CPU Support * 4) SLOT1, SLOT2, SLOT3 p. 24 16-bit ISA Bus Expansion Slo
ページ12に含まれる内容の要旨
R III. INST ALLATION Jumpers III. INSTALLATION Installation Steps Before using your computer, you must complete the following steps: 1. Set Jumpers 2. Install Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Cabinet Wires, and Power Supply 6. Setup the BIOS Software 1. Jumpers WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electric- i
ページ13に含まれる内容の要旨
R R III. INSTALLATION 2. AGP Frequency Selection (AGPFS) This option sets the frequency ratio between the AGP bus frequency and the CPU bus frequency. The default sets the AGP frequency to 2/3 of the CPU bus or host frequency. IMPORTANT: Due to limitations in the VIA Apollo Pro Plus chipset, the AGP frequency should only be set to twice that of the PCI frequency (AGP Frequency=2 x PCI Frequency). Thus AGP frequency must be set in conjunction with the CPU bus frequency to avoid this limitation. (
ページ14に含まれる内容の要旨
R III. INST ALLATION Jumpers III. INSTALLATION 4. CPU Bus Frequency (FS0, FS1, FS2, FS3) This option tells the clock generator what frequency to send to the CPU, DRAM, and chipset. This allows the selection of the CPU’s External frequency (or BUS Clock). The BUS Clock multiplied by the BUS Ratio equals the CPU’s Internal frequency (the ad- vertised CPU speed). 5. CPU Core:BUS Frequency Multiple (BF0, BF1, BF2, BF3) This option sets the frequency ratio between the Internal frequency of the CPU a
ページ15に含まれる内容の要旨
III. INSTALLATION Set the jumpers by the Internal speed of your processor as follows: (BUS Freq.) (Freq. Mult.) Intel CPU Model Freq. Mult. BUS F. FS0 FS1 FS2 FS3 BF0 BF1 BF2 BF3 Pentium III 550MHz 5.5x 100MHz [1-2] [1-2] [1-2] [2-3] [1-2] [1-2] [1-2] [2-3] Pentium III 500MHz 5.0x 100MHz [1-2] [1-2] [1-2] [2-3] [2-3] [1-2] [1-2] [2-3] Pentium III / II 450MHz 4.5x 100MHz [1-2] [1-2] [1-2] [2-3] [1-2] [2-3] [1-2] [2-3] Pentium II 400MHz 4.0x 100MHz [1-2] [1-2] [1-2] [2-3] [2-3] [2-3] [1-2] [2-3] P
ページ16に含まれる内容の要旨
(This page was intentionally left blank.) 16 ASUS P2V User’s Manual
ページ17に含まれる内容の要旨
III. INSTALLATION 2. System Memory (DIMM) This motherboard uses only Dual Inline Memory Modules (DIMMs). Three sockets are available for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Access Memory (SDRAM) of either 8, 16, 32, 64, 128 or 256MB to form a memory size between 8MB to 768MB. One side (with memory chips) of the DIMM takes up one row on the motherboard. To utilize the chipset’s Error Checking and Correction (ECC) feature, you must use a DIMM module with 9 chips per side (
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
III. HARDWARE SETUP 3. Central Processing Unit (CPU) NOTE: The following pictures are provided for reference purposes only. The ap- pearance of your retention mechanism and fan may be different from the following examples. ® Your motherboard provides a Slot 1 connector for a Pentium III processor pack- ® aged in a Single Edge Contact Cartridge (SECC2), a Pentium II processor pack- aged in SECC/SECC2, or a Celeron™ processor packaged in a Single Edge Proces- sor Package (SEPP). An ASUS S370 CPU c
ページ20に含まれる内容の要旨
III. H/W SETUP CPU III. HARDWARE SETUP Installing the Processor 1. Unlock the URM’s Folding Support Arms: The folding support arms of the URM are locked when shipped. Locked Folding Support Arms To unlock the support arms, simply flip them up to an upright position. Unlocked Folding The URM is now ready for the installation Support Arms of your processor. 2. Attach the Heatsink NOTE: If provided, you should follow the heatsink attachment instructions that came with your heatsink or processor. Th
