ページ1に含まれる内容の要旨
Register Your Product on
http://www.pioneerelectronics.com (US)
http://www.pioneerelectronics.ca (Canada)
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.
ページ2に含まれる内容の要旨
PRO151FD.book Page 2 Thursday, July 10, 2008 3:58 PM IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The lightning flash with arrowhead symbol, within an The exclamation point within an equilateral equilateral triangle, is intended to alert the user to the TO PREVENT THE RISK OF ELECTRIC SHOCK, DO triangle is intended to alert the user to the NOT REMOVE COVER (OR BACK). NO USER- presence of uninsulated "dangerous voltage" within the presence of important operating and produc
ページ3に含まれる内容の要旨
PRO151FD.book Page 3 Thursday, July 10, 2008 3:58 PM TABLE OF CONTENTS Congratulations on your purchase of a Pioneer KURO flat panel television. KURO is the future of Pioneer flat-panel displays. It’s a world without boundaries. A place where the senses evolve, colors are felt and sounds can be tasted. An experience that changes not only the way you look at television, but the way you look at the world. We are proud to incorporate this philosophy of exceptional quality, state-of-the-art d
ページ4に含まれる内容の要旨
PRO151FD.book Page 4 Thursday, July 10, 2008 3:58 PM TABLE OF CONTENTS 3.5.2 Activate Parental Control .......................................................................................................................................51 3.5.3 Assign a Rating System to Create Blocks ............................................................................................................51 3.5.4 Temporarily Remove a Block ...............................................................
ページ5に含まれる内容の要旨
PRO151FD.book Page 5 Thursday, July 10, 2008 3:58 PM TABLE OF CONTENTS 5.4.2 Turn OFF the Power With an HDMI Command ................................................................................................... 91 5.4.3 Turn ON the Power With an HDMI Command .................................................................................................... 91 5.4.4 Test the Power Control (On/Off)........................................................................................
ページ6に含まれる内容の要旨
PRO151FD.book Page 6 Thursday, July 10, 2008 3:58 PM Introduction to the ELITE Series Flat Panel TVs 01 1 Introduction to the ELITE Series Flat Panel TVs The Pioneer ELITE Series Flat Panel TV models include the 60-inch PRO-151FD and the 50-inch PRO-111FD (screen sizes measured diagonally). Below is a list of all accessories shipped with your panel. If an item is missing, please contact your dealer or our Service organization immediately. Service contact information is listed on the back
ページ7に含まれる内容の要旨
PRO151FD.book Page 7 Thursday, July 10, 2008 3:58 PM Introduction to the ELITE Series Flat Panel TVs 01 Also shipped with the PRO-151FD (60” panel) Falling Prevention Metal Fittings (2) Silver Screws (4) (4×10 mm) Black Screws (4) (M6×20 mm) Light-Blocking Shield Screws to Metal Fittings (4) (M4×35 mm) Speaker accessories Speaker Brackets Speaker
ページ8に含まれる内容の要旨
PRO151FD.book Page 8 Thursday, July 10, 2008 3:58 PM Introduction to the ELITE Series Flat Panel TVs 01 1.2 Control Options: Get to Know Your Flat Panel TV You can operate your flat panel TV from the panel buttons or with the remote control. The following sections provide button locations/operations for the panel and the remote control. 1.2.1 Control Buttons and More on the Flat Panel TV Your flat panel TV has buttons, indicators, and sensors on the lower front bezel with more buttons, toggl
ページ9に含まれる内容の要旨
PRO151FD.book Page 9 Thursday, July 10, 2008 3:58 PM Introduction to the ELITE Series Flat Panel TVs 01 Back of the Panel 1 - ANT terminal 2 - PC Input terminal (Analog RGB) 3 - Color sensor terminal 4 - AC In terminal (upper bank) 1 2 3 4 5 12 13 14 151617181920212223 (middle bank) 6 7 8 9 10 11 24 5 - Ethernet cable port 15 -INPUT 1 terminal (Video) 6 - INPUT 4 terminal (HDMI) 16 -INPUT 1 terminals (Audio) 7 - INPUT 5 terminal (HDMI) 17 -INPUT 2 terminal (Video) 8 - INPUT 6 terminal (HDM
ページ10に含まれる内容の要旨
PRO151FD.book Page 10 Thursday, July 10, 2008 3:58 PM Introduction to the ELITE Series Flat Panel TVs 01 1.2.2 Operating the Remote Control The remote control for the ELITE Series panels is a powerful tool. This section provides a brief introduction to your remote control while later sections explore more advanced operations. Insert the Batteries into the Remote Control To open push and slide the battery cover in the direction of the arrows. Load the supplied two AA size batteries by the ne
ページ11に含まれる内容の要旨
PRO151FD.book Page 11 Thursday, July 10, 2008 3:58 PM Introduction to the ELITE Series Flat Panel TVs 01 Operating Range for the Remote Control To control the flat panel TV, point the remote towards the sensor on the panel’s bottom right corner. For easy operation, keep the distance between the remote control and the sensor less than 7 m (23 feet) and at an angle of less than 30 degrees. 7 m 30º (23 feet) 30º Sensor The remote control may not work properly if the sensor is in direct sunlig
ページ12に含まれる内容の要旨
PRO151FD.book Page 12 Thursday, July 10, 2008 3:58 PM Introduction to the ELITE Series Flat Panel TVs 01 1.2.3 Buttons on the Remote Control Except for a few options, commands available through the buttons on the flat panel TV are duplicated on the remote control. The remote control can be programmed to control other equipment such as a DVD Player, Surround Sound system, etc. A later section entitled “5 Use Other Equipment With Your Flat Panel TV” explains how to use the remote to control
ページ13に含まれる内容の要旨
PRO151FD.book Page 13 Thursday, July 10, 2008 3:58 PM Introduction to the ELITE Series Flat Panel TVs 01 Remote: Right side buttons (top to bottom, left to right) 16 : Lights up all buttons TV Lights turn off if no operations are performed within five 16 seconds. This is used for remote control use in dark locations. INPUT 17 TV/DTV: 1 2 34 TV/DTV Select analog or digital TV channels 5 6 7 17 AV SCREEN 18 DISPLAY: DISPLAY SELECTION SIZE PC Display the channel information 18 19 FREEZE 19 SCR
ページ14に含まれる内容の要旨
PRO151FD.book Page 14 Thursday, July 10, 2008 3:58 PM Install Your Flat Panel TV 02 2 Install Your Flat Panel TV There are several installation options for your flat panel TV. This chapter walks you through how to choose an installation site, the best mounting methods, and how to install your panel. 2.1 Choose a Location and the Mounting Method Your flat panel TV is very thin. The panel needs a solid surface and some sort of support structure (a stand, table, etc.) to protect it from being
ページ15に含まれる内容の要旨
PRO151FD.book Page 15 Thursday, July 10, 2008 3:58 PM Install Your Flat Panel TV 02 2.1.1 Check the Location for Suitability When choosing the location for your panel, there are several factors you need to keep in mind. The installation site should be out of direct sunlight and have sufficient ventilation around the flat panel TV to allow cooling. The diagram below is an example of a stand-mounted panel with proper ventilation. Over 50 cm (19 11/16 inches) Over 10 cm The distance behind
ページ16に含まれる内容の要旨
PRO151FD.book Page 16 Thursday, July 10, 2008 3:58 PM Install Your Flat Panel TV 02 2.2 Install the Panel Using a Stand 2.2.1 Use or Remove the Included Stand The PRO-111FD ships with the Pioneer table top stand (stand) attached. Attach the included stand to the panel for the PRO-151FD. For PRO-111FD, attach the falling prevention metal fittings after placing the panel to stand upright. (PRO-111FD) Installation screws (M4 × 35 mm: black) Falling prevention metal fitting Attach the Stand to t
ページ17に含まれる内容の要旨
PRO151FD.book Page 17 Thursday, July 10, 2008 3:58 PM Install Your Flat Panel TV 02 7 ) After assembling the stand, attach the falling prevention metal fittings using the installation screws. (PRO-151FD) Installation screws (M4 x 35 mm: black) Falling prevention metal fitting 8 ) With the flat panel TV still face down, insert the stand’s supports into the bottom of the panel then tighten the screws. Line up the column supports with Installation bolts Installation bolts the bottom of th
ページ18に含まれる内容の要旨
PRO151FD.book Page 18 Thursday, July 10, 2008 3:58 PM Install Your Flat Panel TV 02 Attach the Light-Blocking Shield Conduct after attaching the flat panel TV onto the stand. Light-blocking shield Front Base cover Rear Note: Attach the light-blocking shield after anchoring the base cover on a flat stable place. Peel off one side of the double-stick tape on the light-blocking shield and attach the shield onto the base cover. Front Rear Note: Be careful that the light-blocking shield does not c
ページ19に含まれる内容の要旨
PRO151FD.book Page 19 Thursday, July 10, 2008 3:58 PM Install Your Flat Panel TV 02 Attach/Detach the Speaker The flat panel TV’s speaker delivers high-quality, clear sound. Although other devices can be added or removed from the mounted panel, physically attach the speaker last. Disconnect the cables from the Speaker and REMOVE THE SPEAKER before mounting or moving the panel. Before attaching the speaker to your mounted panel, review the information below. � Lay the panel face down on a s
ページ20に含まれる内容の要旨
PRO151FD.book Page 20 Thursday, July 10, 2008 3:58 PM Install Your Flat Panel TV 02 (PRO-111FD) Screw holes Speaker bracket (For TOP-Right) Speaker bracket (For TOP-Right) Speaker bracket Screw holes (For BOTTOM-Right) Speaker bracket (For BOTTOM-Right) Place the speaker so its terminals (bottom) are facing you. 2 ) Screw a supplied screw into the speaker bracket hole (lower of the two) at the top, rear of the panel. Do not tighten it all the way yet. Leave it loose, with about 5 mm left
