Audiovox CMOS2の取扱説明書

ページ1に含まれる内容の要旨

Instruction Manual for CMOS2
5-in-1 Rear-view Camera

Dear Customer,
CONGRATULATIONS! This 5-in-1 high resolution
rear-view camera kit when used as described can
be installed in 5 different ways and will improve your Installation Instructions:
ability to see what behind you car, CRV or mini-van.
We have taken numerous measures in quality A. Bumper Mounted
control to ensure that your products arrive in top Before you drill a hole on the rear bumper, you must
condition and will p

ページ2に含まれる内容の要旨

coax cable. Note: DO NOT USE AN AUDIO RCA CABLE. D. Short butterfly style bracket 1. Parts #2, #1, #3, #4, #5, #8 and #6 May be used. The Butterfly mount can be at any position on the camera. 2. Mount the camera using two screws; always look before you screw into the vehicle to insure there is nothing located behind your mounting location. 3. Route the cable into the trunk or Tail Light Housing area. 4. Connect the camera power cable: Red to reverse lamp power