ページ1に含まれる内容の要旨
PLVW1048VGA
10.4” FLIP-DOWN IN-CAR DISPLAY
(+VGA)
USER MANUAL
V1.0
ページ2に含まれる内容の要旨
INDEX NO CONTENT PAGE 1 Specification 2 Installation 3 OSD function 4 Content of OSD function 5 Accessories 6 Outside dimension 7 Precaution 8 Remark
ページ3に含まれる内容の要旨
1. Specification CAR-TV 10.4” + VGA function Resolution 800(H) x 600(V) Size 10.4” TFT LCD 200 cd/ (Typ) Brightness Composite Video(RCA)(F) ×2 Not support Video input (NTSC,PAL,SECAM) mono signal Stereo Sound Input (RCA)(F) ×2 Audio input PC Sound Input (Phone Jack) ×1 Analog 0.7Vp-p/75ohms, Sync PC input Separate, TTL level. Horizontal 30k ~ 70k(Hz), Frequency Range Vertical 50 ~ 75(Hz) Support VESA DDC2B, EDID v1 r1, DPMS Power input DC 12~35V,3A(Max) IR
ページ4に含まれる内容の要旨
2. Installation Step 1: Attention: It’s directional for the iron slice. Instruction to fix the screw of the iron slice
ページ5に含まれる内容の要旨
Instruction to fix the screw of the monitor Screw hole 4 mm
ページ6に含まれる内容の要旨
Step 2: Install the monitor on the roof. Car roof Iron slice Car roof Mounting plate
ページ7に含まれる内容の要旨
Step 3: Fix the monitor on the iron slice with the screws. See step 1 Completed
ページ8に含まれる内容の要旨
3. OSD function VIDEO control keys 1 2 3 4 5 6 dome lights ON/OFF 1. Power When you push this button, it will Power ON or OFF the LCD. 2. ” “ When you push this button, it will decrease the degree of the function that you selected. 3. ” “ When you push this button, it will decrease the degree of the function that you selected. 4. MENU/SELECT Show function menu list and select the function
ページ9に含まれる内容の要旨
PC/VIDEO remote control function 1 6 4 2 3 5 1. POWER When you push this button, it will Power On or Off the LCD. 2. V1/V2: You could select V1 or V2 or PC with this button. 3. MENU Show Function Menu List and Select the function on the menu, when you push this key. 4. UP When you push this button, it will increase the degree of the function that you selected. 5. DOWN When you push this button, it will decrease the degree of the function that you selected.
ページ10に含まれる内容の要旨
4. Content of OSD Function OSD Adjustment for PC function Press “MENU” Button display will show following picture. BIOS VERSION Display Bios Version PIP Enable Auto Tune Brightness Contrast Color Quality Position Mute FM Default Save Exit 800X600 PC Display Mode H:37.6KHz V:59.7Hz PC Input Frequency Continue to press “UP” & “DOWN“ buttons and select above functions. Then, use “Menu” button to enter these functions and adjust them to your per
ページ11に含まれる内容の要旨
4.1 PIP CHANNEL SELECT( Under PC Mode ) VIDEO 1 VIDEO 2 PIP OFF RETURN VIDEO 1: Set VIDEO 1 Input Press “MENU” to enter VIDEO 2: Set VIDEO 2 Input Press “MENU” to enter. PIP OFF : exit PIP function. RETURN: Back to new setting. 4.2 AUTOTUNE( Under PC Mode ) AUTOTUNE D O I N G AUTOTUNE : Auto tracking , positioning, phase and size (press “MENU” to enter this adjustment. It takes 5 second to finish this adjustment.) 4.3 BR
ページ12に含まれる内容の要旨
4.4 CONTRAST CONTRAST 0 63 CONTRAST: Adjust white color level 0~63 of the image. 4.5 COLOR 9300 7500 6550 USER RETURN 9300K : Set color to 9300K Use “MENU” to enter 7500K : Set color to 7500K Use “MENU” to enter 6550K : Set color to 6550K Use “MENU” to enter USER : Set color by user Use “MENU” to enter EXIT : Back to new setting
ページ13に含まれる内容の要旨
4.6 QUALITY SIZE PHASE TEST/GFX SHARPNESS RETURN SIZE : Adjust size of the image. PHASE : Adjust phase level 0~63 of the image. TEXT/ GFX: DOS MODE/ change Text 720x400 & Gfx 640x400. SHARPNESS : Adjust Sharpness level 0~15 of the image. RETURN: Back to new setting 4.7 POSITION IMAGE POS OSD POS SPEED EN SPEED ADJ RETURN H:37.6KHz V:59.7Hz IMAGE POS : Adjust UP/ DOWN/ HOR/VER position of the image. OSD POS : Adj
ページ14に含まれる内容の要旨
4.8 MUTE MuteOff MuteOn H:37.6KHz V:59.7Hz Mute On : 4.9 FM BIOS VERSION FM88.0MHZ FM88.1MHZ FM88.2MHZ FM88.3MHZ FM88.4MHZ FM88.5MHZ FM88.6MHZ FM88.7MHZ FM88.8MHZ FM88.9MHZ Retur n 800X600 H:37.6KHz V:59.7Hz
ページ15に含まれる内容の要旨
RETURN : Back to new setting 4.10 DEFAULT DEFAULT YES NO 5 OSD Adjustment for VIDEO function Press “MENU” Button display will show following picture. BIOS VERSION Display Bios Version Brightness Mute FM PIC Mode Contrast Saturation Hue Default Save Exit Video System TV NTSC H:15.7KHz V:59.7Hz Video Input Frequency BRIGHTNESS : See 5.1 Mute : See 5.2 FM : See 5.3
ページ16に含まれる内容の要旨
PIC MODE : See 5.4 CONTRAST : See 5.5 SATURATION : See 5.6 HUE : See 5.7 DEFAULT : Set default value. See 5.8 SAVE EXIT : Save all of adjustment & exit to OSD function. 5.1 BRIHTNESS BRIGHTNESS 0 63 BRIGHTNESS: Adjust LCD brightness level 0~63 of the image 5.2 MUTE MuteOff MuteOn H:37.6KHz V:59.7Hz Mute On :
ページ17に含まれる内容の要旨
5.3 FM BIOS VERSION FM88.0MHZ FM88.1MHZ FM88.2MHZ FM88.3MHZ FM88.4MHZ FM88.5MHZ FM88.6MHZ FM88.7MHZ FM88.8MHZ FM88.9MHZ Retur n 800X600 H:37.6KHz V:59.7Hz RETURN : Back to new setting 5.4 PIC MODE MODE 1 MODE 1 MODE 2 MODE 0: GAMMA TABLE 0 MODE 1: GAMMA TABLE 1 MODE 2: GAMMA TABLE 2
ページ18に含まれる内容の要旨
5.5 CONTRAST CONTRAST 0 63 CONTRAST: Adjust white color level 0~63 of the image. 5.6 SATURATION. SATURATION -128 +127 SATURATION: Adjust color Saturation level ~128~127. 5.7 HUE HUE -128 +127 HUE: Adjust color Hue level –128~127 5.8 DEFAULT DEFAULT YES NO
ページ19に含まれる内容の要旨
5. Description of Accessories Accessory Description Video, audio, power input See chart 1 1. Power cable+ Fuse(spec:3A/250V) Yellow video input 1, video input 2 Red audio input (R)1, audio input(R)2 White audio input(L)1, audio 2 input(L)2 Power input connector: Red: Anode Black: Ground See chart 2 IR transmitter: Receive 2.3MHz & 2.8MHz (wireless headphone not included) 3
ページ20に含まれる内容の要旨
Sound cable: PC audio output connect to audio 4 input of monitor PC audio input 5 RGB cable: connect PC to video input of 6 monitor PC video input 7
