ページ14に含まれる内容の要旨
Appendix A IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. C. The appliance has been exposed to rain; or 2. Keep these instructions. D. The appliance does not appear to operate normally or exhibits a 3. Heed all warnings. marked change in performance; or 4. Follow all instructions. E. The appliance has been dropped, or the enclosure damaged. 5. Do not use this apparatus near water. 17. Tilt/Stability - All televisions must comply with reco
ページ15に含まれる内容の要旨
13
ページ16に含まれる内容の要旨
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: 3139 285 20142
ページ1に含まれる内容の要旨
Register your product and get support at
www.philips.com/welcome
26HFL5561L/27
26HFL5561V/27
32HFL5561D/27
32HFL5561L/27
32HFL5561V/27
37HFL5581D/27
37HFL5581L/27
37HFL5581V/27
42HFL5581L/27
42HFL5581V/27
52HFL5581L/27
52HFL5581V/27
EN Quick Start Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
1 How to use this guide The Quick Start Guide helps you install the Philips commercial television, as quickly as possible. It contains the necessary information to install the TV and configure the settings. Read and understand the instructions in the Quick Start Guide before you use your TV. For detailed information on additional features, download the user manual by selecting your TV model at www.philips.com/hospitality. The Quick Start Guide contains the following information: • contents
ページ4に含まれる内容の要旨
2 The contents of the box The box contains the following items: • which secure the TV stand to the furniture of the hotel room to prevent unauthorized removal or theft • desk-to-stand screws (2)* • desk-to-stand washers (2)* • desk-to-stand secure groove nuts (2)* • which secure the TV stand to the TV to prevent unauthorized removal or theft • stand-to-TV secure screws (4)* • stand-to-TV cross-head screws (4)* • which secure the TV stand to the furniture of the hotel room with non-drilling su
ページ5に含まれる内容の要旨
3 Standalone installation 4 This section describes how to install the TV channels automatically. 1 Connect the RF signal from the wall socket to the TV. 2 Plug the 2-pin power cord into the power outlet. 3 MENU 2 1 • Press Power on the setup remote control. TV ANTENNA POWER RECALL TEXT SMART SLEEP CC GUEST DCM 1 2 3 SETUP 4 5 6 7 8 9 Cable 5 Press M on the setup remote control to display the setup menu. 6 Press to select AUTO INSTALL TV. 3 Set the switch at the side of the setup remote
ページ6に含まれる内容の要旨
4 Press 0-9 (Numeric buttons) to enter the physical channel 4 Change the channel number. 5 Press to set the MPEG PROGRAM NUMBER to a particular settings program in the physical channel. 6 Press 0-9 (Numeric buttons) to enter the program number. This section describes how to change the channel settings. Note • You can also select DIGITAL CH SCROLL and press to select the digital channel numbers. Manual installation of analog channels 1 Press M on the setup remote control to display the setu
ページ7に含まれる内容の要旨
5 Configure advanced SWITCH ON / OSD settings WELCOME MESSAGE > SWITCH ON CHANNEL TV 2 SWITCH ON SMARTGUIDE YES This section describes how to configure the advanced settings for the TV such as volume, channel, picture format, power mode, picture, sound, 30 SWITCH ON VOLUME security, control, ratings, and hotel information. SWITCH ON PIC FMT WIDESCREEN POWER ON LAST STATUS VOLUME INDICATOR YES Access the configuration menu ALL CHANNEL DISPLAY 1 Press M on the setup remote control to di
ページ8に含まれる内容の要旨
Configure the control settings 1 P r e s s M o n t h e s e t u p r e m o t e c o n t r o l t o d i s p l a y t h e s e t u p m e n u . 2 P r e s s t o s e l e c t CONFIGURATION > CONTROL > MAX VOLUME . CONTROL OFF ESP DIGIT TIMEOUT 3.0 NO 3 DIGIT ENTRY SOURCE MENU ITEM NO PIC FMT MENU ITEM NO SMARTWINDOW MENU ITEM NO SMART GUIDE NO MIN VOLUME 0 MAX VOLUME 12 3 P r e s s t o a d j u s t t h e m a x i m u m v o l u m e f o r t h e T V . 4 P r e s s t o a d j
ページ9に含まれる内容の要旨
Configure SmartGuide Categories 6 Configure SmartFeatures This section provides information to configure SmartGuide Categories settings icons. Guests can access these icons by pressing the CHANNEL GUIDE button on the guest remote control to display the SmartGuide Categories screen. Refer to the previous chapter for information to Configure SmartPower settings assign TV channels to categories (see ‘Select a ring’ on page 4). 1 Press M on the setup remote control to display the setup menu. Ph
ページ10に含まれる内容の要旨
SECURITY SECURITY STANDARD KEYBOARD LOCK NO REMOTE CONTROL LOCK NO DECRYPTION CONTROL > SMARTSECURE > 3 P r e s s t o e n a b l e o r d i s a b l e S m a r t S e c u r e . 4 P r e s s t o s e l e c t t h e S m a r t S e c u r e c h a n n e l . » The TV checks f or the Smar tSecure ID when tur ned on. 5 P r e s s t o a d j u s t o t h e r s e c u r i t y s e t t i n g s o n t h i s m e n u . Note • SMARTSECURE i s a v a i l a b l e o n s e l e c t e d m
ページ11に含まれる内容の要旨
7 Clone TV configuration SMARTCLONE data SOURCE RF YES CABLE TUNING RF CHANNEL NUMBER 18 You can copy the configuration data from a TV to a USB storage device or vice versa. This enables you to bypass the setup menu and configure RF TO TV > multiple TVs by simply using the USB storage device. This section describes how to clone the configuration data from a TV to a USB storage device or from a USB storage device to a TV. Clone data using a USB storage device 1 Press M on the setup remote c
ページ12に含まれる内容の要旨
8 Installation of Pay-Per- View box 01 01 32HFL5561D/27 32HFL5561D/27 02 02 SV1A0707100003 SV1A0707100003 03 03 IC7U1 - 0 .11/M3.22 IC7U1 - 0 .11/M3.22 This section describes how to install an external pay-per-view box. 04 04 LC72HUL1 - 0.13 LC72HUL1 - 0.13 05 05 OPT (30) 22 20 1C 23 OPT (30) 22 20 1C 23 Step1: Set the communication mode 06 06 OPT - MODEL 32HFL5561D/27 OPT - MODEL 32HFL5561D/27 07 07 You must setup the correct communication protocol before yo
ページ13に含まれる内容の要旨
9 Troubleshoot basic problems This section describes commonly encountered issues and accompanying solutions. The TV does not communicate with the external interactive terminal: Press RECALL on the setup remote control. Check that the status of communication is: “COMMUNICATION SP-SPI ONLINE”. • If the communication protocol in the status is not SP-SPI, set the communication protocol by following the instructions in the previous chapter. • If the communication status is OFFLINE, check that th
