Pelco BKMT10/24の取扱説明書

ページ1に含まれる内容の要旨

C468M
INSTALLATION MANUAL
BKMT10, BKMT10/230, AND BKMT10/24
BLOWER KITS
®
1.0 SCOPE 3.0 INSTALLATION
The information contained within this manual pertains
Install the blower kit in either the HT10V or MT10P
to the BKMT10, BKMT10/230, and BKMT10/24
enclosure as outlined below.
blower kits.
1. Remove the rear plate of the enclosure, and
Installation should be in accordance with all applicable
then remove the camera sled.
local and national electric codes, utilizing approved
materials only.
2. As

ページ2に含まれる内容の要旨

4.0 WARRANTY AND RETURN If a warranty repair is required, contact PELCO at (800) 289-9100 or (559) 292-1981 for a Repair Authoriza- INFORMATION tion number (RA), and provide the following informa- tion: WARRANTY 1. Model and serial number PELCO will repair or replace, without charge, any merchandise proved defective in material or workman- 2. Date of shipment, P.O. number, Sales Order ship for a period of one year after the date of shipment number, or PELCO invoice number (six months on all pan