ページ1に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 1
Introduction
Help?
Thank you for purchasing this television set.
If this instruction manual does
This handbook has been designed to help you install and
not give an answer or if ‘Tips’ do
operate your TV set. We would strongly recommend that you
not solve your TV problem, you
read it thoroughly.
can call your Local Philips
We hope our technology meets entirely with your satisfaction.
Customer or Service Centre. See
the supplied World-wide
guarantee booklet.
ページ2に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 2 Care of the screen Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the screen.When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks.
ページ3に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 3 To use the menus & Press the MENU key on the remote control to ( Use the cursor left/right to adjust. summon the main menu. § To exit the menus, press the MENU key é Use the cursor up/down to select Picture, repeatedly. Sound, Features or Install. “ Use the cursor in the right direction to select Note: Items temporary not available or not relevant are the menu item. displayed in a light grey colour and cannot be selected. ‘ Use the cursor up/down again to s
ページ4に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 4 Use of the remote control B Standby Press to switch the TV on or off x Pixel Plus demo on/off from or to standby mode. (Only available on certain versions.) When switched off, a red indicator •Press the x key. on the TV lights up. The screen is divided into 2 parts: - in the left part Pixel Plus is switched off; æPIP (Picture in Picture) on/off - In the right part Pixel Plus is switched on. (p. 17) •Press the x key again to switch the Pixel Plus demo off.
ページ5に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 5 MODE* Press this key to switch between TV, DVD and AUX functions. q 16:9 formats The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 4:3 picture sometimes have a black band at the top and the bottom of the screen (letterbox format). This function allows you to optimise the picture display on screen. Using the different formats Press the q key or use the keys pπ to select the different modes: 4:3, Mov
ページ6に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 6 Keys on the right side of the TV Should your remote be lost or broken you can still change some of the basic settings with the keys on the right side of your TV. Press: • POWER : to switch the TV on or off. • +VOLUME - : to adjust sound level. • +PROGRAM - : to select programmes. • MENU : to access or close menus. The + PROGRAM - keys can be used to select an - VOLUME + MENU/OK - PROGRAM + POWER adjustment and the + VOLUME - ke
ページ7に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 7 Recorder (VCR-DVD+RW) CABLE 4 3 IN OUT RECORDER Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum distance of 0,5m from the screen. & Connect the RF Antenna cable 1 to the RF IN socket of your recorder. é Connect another RF cable 2 from the output OUT of your recorder to the TV’s input x ANTENNA 75 Ω jack. “ Better playback quality can be obtained if you also connect th
ページ8に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 8 Devices with Component Video Output Connectors (YPbPr) CVI-1 can handle 480i, 480p, 576i, 576p, 720p and 1080i signals. CVI-1 CVI-1 CABLE 4 2 3 OUT 1 IN & Connect the RF Antenna cable 1 to the RF IN socket of your recorder. é Connect another RF cable 2 from the output OUT of your recorder to the TV’s input ANTENNA x 75 Ω jack. “ Connect the three separate component video cables 3 to the device having component video outputs (YPbPr), such as DVD-players, las
ページ9に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 9 Devices with Progressive scan output (e.g. a digital Set Top box, a video game console or Progressive scan DVD player (480p, 576p, 720p or 1080i) PC-VGA/CVI-2 PC-VGA/CVI-2 PC-VGA/CVI-2 2 1 DVD & Connect the device with 2Fh YPbPr output to the VGA connector 1 (with the supplied adapter cable VGA to cinch) and to the L and R AUDIO jacks 2 of PC-VGA/CVI-2. See also the manual of your High Definition device. é Press the AV key on the remote control repeatedly
ページ10に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 10 Devices with HDMI (High Definition Multimedia Interface) connector HDMI is the leading new standard for Digital High Definition video and audio interconnection. Eg. with a HDMI/PC-D Digital Set top box, with HDMI-equipped devices like a DVD-R,AV receiver... PC-VGA/CVI-2 PC-VGA/CVI-2 /PC-D /PC-D The HDMI connector allows the following TV and monitor display modes via the AV key on the remote control, for High Definition (HD) and computer (PC) equipment: ENH
ページ11に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 11 Computer with VGA connector to the PC-VGA connector of the TV PC-VGA/CVI-2 PC-VGA/CVI-2 PC-VGA/CVI-2 2 1 & Connect one end of a VGA cable 1 to the video card of the computer and the other end to the VGA connector at the bottom of the TV. Fix the connectors firmly with the screws on the plug. é In case of a Multimedia computer, connect the audio cable 2 to the audio outputs of your Multimedia computer and to the AUDIO R (right) and L (left) inputs. “ Press
ページ12に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 12 Side connections (camcorder, video games, headphone,...) 1 2 IN 3 IN 2 3 IN IN 1 Camera, Game or Camcorder & Connect your camera, game or camcorder as shown. é Connect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect AUDIO R 3. S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S- VIDEO input 1 and AUDIO inputs 3. Do not connect cable 1 and 2 at the same time;This may cause picture disto
ページ13に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 13 Record with your recorder Record a TV program You can record a TV program using your recorders tuner without affecting your TV. & Select the channel number on your recorder. é Set your recorder to record. See the handbook for your recorder. Switching channel numbers on your TV does not disturb recording ! Record a programme from MONITOR OUT You can record a program on your recorder from the TV tuner, and from a device connected to AV or the side connectors
ページ14に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 14 How to search for and store TV channels TV Menu To install your TV proceed as follows: Picture Language & Press the MENU key on the remote control. Sound Auto Store é Use the cursor up/down to select Install. Features Manual Store “ Press the cursor right to enter the Install menu. Install π Sort ‘ Use the cursor left/right to select your language. Name Channel Edit Auto store Auto Store & Select Auto Store in the Install menu. Channel π .......... The aut
ページ15に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 15 Manual store Searching for and storing TV channels is done channel by channel.You must go through every step of the Manual Install Installation menu. Language Colour System & Select Manual Store in the Install menu and press the Auto Store Sound System cursor right to enter. Manual Store π Search é Select Colour system and press the cursor right. Sort Channel Name Fine tune If Auto is selected, the respective colour system will be automatically selected a
ページ16に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 16 Give name It is possible to change the name stored in the memory or to assign a name to a TV channel or external for which a name has Install not yet been entered.A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99. Language 10 Note : It is not possible to rename the VGA source. Auto Store 11 Manual Store ......... & Select Name in the Install menu and press the cursor right. Sort é Select the programme number. Name π “ Pre
ページ17に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 17 Features menu This menu lets you use the TV set as an alarm. Timer & Press the MENU key. é With the cursor, select Features, then Timer. TV Menu “ Sleep (only available on certain versions): to select an automatic standby period. Picture Brightness ‘ Time: enter the current time. Sound Colour ( Start Time: enter the start time. Features π Contrast § Stop Time: enter the standby time. Install Sharpness Colour Temp è Channel: enter the number of the channel
ページ18に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 18 Child lock The Child lock feature receives and processes data sent by broadcasters or other programme providers that contain programme content advisories.When programmed by the viewer, the TV can respond to the content advisories and block TV Menu program content that may be found objectionable. Child lock allows parents to block out or “censor” any channels Picture Timer they think children should not watch.A channel blocked cannot be viewed until a corre
ページ19に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 19 Only English teletext supported Teletext Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.). Press: You will obtain: b Teletext This is used to call teletext, and then exit. on/off The summary appears with a list of items that can be acce
ページ20に含まれる内容の要旨
2445.3 en 11-10-2005 10:45 Pagina 20 Using in PC monitor mode Your TV can be used as a computer monitor. You must first of all connect the computer, adjust the resolution and refresh rate (see p. 10). Notes: -When using the TV as a PC monitor, slight diagonal interference lines may be observed when it is operated under electromagnetic interference environment but will not affect the performance of this product. - For better performance, a good quality HDMI/DVI/VGA cable with good noise isolat
