ページ1に含まれる内容の要旨
26PF5521D
32PF 5521D
37PF 5521D
42PF 5521D
Polski Svenska Español Français English
Č esky Português S uomi Deutsch
ページ2に含まれる内容の要旨
Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We strongly recommend that you read it thoroughly. Table of Contents Safety Information/Useful Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Television keys and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Remote control keys .
ページ3に含まれる内容の要旨
Safety Information 10 cm 10 cm 10 cm X Leave at least 10 cm around each side of the When cleaning the surface or the screen of the TV set to allow for proper ventilation. Place set, wipe gently with absorbent cotton or cloth the set on a stable, level surface. Never cover or other soft material like chamois. Do not use the ventilation slots of the TV with a cloth or too wet a cloth which is dripping with water. other material. It may cause overheating. Do not Do not use acetone, toulene
ページ4に含まれる内容の要旨
Televison keys and connectors 26” /32” TV 4 8 3 2 9 1 10 7 R 6 AUDIO EXT. 4 IN 5 AUDIO R L Pr Pb Y L L IN 14 VIDEO IN R HDMI 2 HDMI 1 S-VIDEO AC in ~ DVI EXT.2 /SVHS2 EXT. 1 (AUDIO IN) 13 12 11 14 37” / 42” TV 2 3 CAUTION : This 4 a Class 1 apparatus. It must be connected to a MAINS socket out with a protective earthing connection. 8 10 6 7 9 1 ï 5 EXT 4 L ANTENNA R Pr Pr Pb Pb Y Y 5 A AUDIO UDIO R L IN IN R 42” HDMI 2 HDMI 1 Plasma 37” DVI (
ページ5に含まれる内容の要旨
Television keys and connectors 1 SPDIF socket : to connect to an amplifier POWER . : to switch the TV on and off. 10 The power remains on even when the Power with coaxial digital input (only available in Digital Mode). switch is turned off. 2 VOLUME –/+: to adjust sound level. 11 HDMI 1 /HDMI 2 sockets : to connect to set-top boxes, DVD player/recorder, High MENU : to access or close menus. 3 Definition receiver/equipment or Personal The PROGRAM –/
ページ6に含まれる内容の要旨
Remote Control keys Standby 1 To set the TV to standby mode. To switch the TV set on again, press , to 1 or the + P(age) – key. 2 2 Mode selector To activate the remote control in TV, DVD or AUX mode (see page 6). Cancel 3 3 1 7 In digital mode, it functions as an exit key for MHEG teletext when no coloured key links are available to exit teletext mode. TV menu 4 1 8 4 To display or edit from the analogue menus. Cursor 5 These 4 keys are used to move withi
ページ7に含まれる内容の要旨
Remote Control keys 20 TV Guide (See page 16). Teletext / Screen Format 13 In teletext mode, it functions as a teletext key (see pages 27-28). Programme selection 21 In TV mode, it is used to access different To access the next or previous programme (or screen formats (see page 25). page in digital menu. 22 Alternate channel / Edit or back space AV /Teletext 14 In Analogue/Digital mode, it allows you to In teletext mode, it functions as a teletext alternate the previously vi
ページ8に含まれる内容の要旨
What is Digital Television? Digital Television offers a far wider choice of TV viewing, free from the interference that you may experience on analogue TV. It promises to transform television viewing into a whole new experience. There is a greater selection of widescreen programming . Many of your favourite programmes are in widescreen on the digital channels - something the analogue TV cannot do properly. There is new whole experience of interactivity on digital TV. By using your remote contr
ページ9に含まれる内容の要旨
Overview of Digital main menu and sub-menus Setup Preferences Type of Selection Language Audio Basque, Catalan, Croatian, Czech, Danish, Dutch, Subtitle/Teletext English, Finnish, French, Gaelic, Gallegan, German, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese, Russian, Serb, Slovak, Spanish, Swedish, Turkish, Welsh Subtitling Mode On, Off, Auto Subtitles for hearing impaired Yes, No Sy
ページ10に含まれる内容の要旨
Overview of Digital main menu and sub-menus Setup Installation Service lists Rearrange services View new TV channels. Listen to new Radio Stations. Service setup Add new services Search TV channels found. Radio station found. Other services found. Store Discard Reinstall all services Search TV channel
ページ11に含まれる内容の要旨
Switch on for the first time The first time the TV set is switched on, a “ With the cursor keys, select Language, congratulation message will appear on screen. Country or Time Zone and check if the The language of which changes every 5 seconds. adjustment is according to your preferences. If the message is not displayed, press and hold If necessary, use the cursor keys to make down the MENU key on the side of the TV set your adjustment and press key to exit. for 5 seconds to
ページ12に含まれる内容の要旨
Understanding the information on the banner When you select a digital programme, an Symbols description : information banner is displayed for a few i More information about this programme is seconds at the top of the screen. available : press the key once to display and the second time or remove it. Banner description Subtitling is available : if you want to display them, press the key or the programme key to access the options menu and select preset start and number su
ページ13に含まれる内容の要旨
View or Listen to new services This menu allows you to check the availability “ Use the Î ï keys to select View new TV of new TV channels or new radio stations that channels or Listen to new Radio station. have been launched by the broadcaster after ‘ If new services are availables, press Æ to the initial installation. enter into the list and use the Î ï keys to move through the list. & From the digital mode, press the key ( To return to previous menu, press the Í key. to display the
ページ14に含まれる内容の要旨
Test reception This menu allows you to check the strengh of ‘ Use the Æ key to enter the Frequency slot and use the to keys to enter the the signal you are receiving through your aerial. frequency of the digital channel you want & From the digital mode, press the key to to test. Use the Æ key to move to the next display the setup menu. character space. Your TV magazine can é Use the ï key to select installation and press provide the list of digital channel numbers. Æ key to display
ページ15に含まれる内容の要旨
Access restrictions • Maturity rating : select your preferred rating This menu allows you to setup the access restrictions of the digital channels. to lock the channel. Maturity rating will only block certain & From the digital mode, press the key programmes if the broadcaster provides to display the setup menu. data with the programme. é Use the ï key to select Access restriction • TV channels : select the TV channel you want and press Æ key. to lock and press key. “ Pr
ページ16に含まれる内容の要旨
Information The software download menu will give a This menu provides information about the description of the software together with the software version and the installation of new date and time of the download. This may update software. certain menus, functions or add new features, but the general way in which the TV operate will not & From the digital mode, press the key change. Once accepted the download will take to display the setup menu. place at the designate
ページ17に含まれる内容の要旨
TV guide *Pin 8 recording refers to the technique of The TV guide is an Electronic Programme Guide using the pin 8 signal on a Scart cable that provides you with a quick and easy way (normally used to indicate the presence of a to view a complete list of digital programmes signal for display on the TV) connected as you would in a newspaper or TV magazine. between an idTV/Set-top box and a VCR, to You can navigate through the list of digital switch the recorder into recor
ページ18に含まれる内容の要旨
Recording function This feature enables you to record a digital • Enter your pin code if locked : enter your channel while the TV is in standby mode. You secret code only if you have activated the will still have to programme your video recorder. access restriction feature (see page 14). If you wish to continue watching another digital Press key to confirm. channel after setting a timer, you can do so by • Day & Month : enter the date by using the changing channels in the normal wa
ページ19に含まれる内容の要旨
Digital Teletext (MHEG) Available in U.K. only Digital teletext services differ greatly from When you switch to a digital channel with links analogue teletext. When you switch to a to a telext service, software is downloaded in Digital teletext service, the images you see the background to enable the teletext function. contain graphics and text which are laid out You should wait for a while before you press and controlled in a manner decided by the the key to allow the software downloa
ページ20に含まれる内容の要旨
Using the Conditional Access Module (CAM) The Conditional Access Module (CAM) menu provides access to functions contained on IMPORTANT the CAM. The module can be inserted into the Always switch the TV off before inserting Common Interface (CI) slot located at the side or removing the module. of the 26”/32” TV and at the rear bottom of the 37”/42” TV. Remove the sticker before inserting module. Inserting the CAM Remove sticker & Switch off the TV. é Some modules come with a viewing
