ページ1に含まれる内容の要旨
Operating Instructions
Wide LCD TV
Model No.
TX-23LX60F
TX-26LX60F
TX-32LX60F
Please read these instructions before operating your set
and retain them for future reference.
English
ページ2に含まれる内容の要旨
Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the be ginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers. Contents Accessories ................................................................ 2 Tuning menu – Auto setup ............
ページ3に含まれる内容の要旨
Warnings and Precautions • This type of LCD panel damage, is not an operating defect, • This TV set is designed to operate on AC 220-240 V, and as such is not covered by the Panasonic warranty. 50 Hz. • The On / Off switch on this model does not fully • To prevent damage which might result in elec tric shock disconnect the TV from the mains supply. Remove the or fi re, do not expose this TV set to rain or excessive mains plug from the wall socket before connecting or moisture. This TV must
ページ4に含まれる内容の要旨
Installation Please use the apparatus only with the stands supplied or with appropriate wall mount kits. Receiver Location Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including refl ections) will fall on the screen. Use of some types of fl uorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture. Optional External Equipment The
ページ5に含まれる内容の要旨
Quick Start Guide Connection and setting up options 1 Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads. RF cable (Not supplied) SET TOP BOX Scart cables (Not supplied) RF cable (Not supplied) VCR / DVD Recorder OR Plug in aerial and connect ancillary equipment. 2 Connect the mains plug to the wall sock et. OK Press the [ ] switch on the TV set to turn the set on. 12 3 To switch the TV set to Standby mode, press 45 6 the button on the remo
ページ6に含まれる内容の要旨
Quick Start Guide Select your country. 3 For Belgium, Switzerland and E.Eu, select OSD Sprache Land Deutschland Deutsch Österreich the desired language. France Italia España OK If you wish to perform manual tuning, press Portugal Nederland Danmark Sverige the Green button. Norge Suomi Belgien Green See page 16. Schweiz ELLADA Polska 12 3 Česká republika Magyarország 45 6 E.Eu Auswählen Press the Red button to start Auto Setup. 78 9 Red C 0 Start ATP Suchlauf Abbruch Auto setup will begin, your
ページ7に含まれる内容の要旨
Basic controls: control panel and remote control On / Off switch STR (Normalization store) Used to store tuning and other function settings. TV/AV button (see page 24) F (Function select) Displays the On Screen Display functions, use Increases or decreases the programme position by one. When a repeatedly to select from the available functions - function is already displayed, press to increase or decrease the Volume, Backlight, Contrast, Brightness, Colour, selected function. When in Standby
ページ8に含まれる内容の要旨
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired. MENU The MENU button is used to open the main menus and also to return to the previous menu. OK The up and down cursor buttons are used to move the cursor and select menus. 12 3 45 6 The left and right cursor buttons are used to access menus, 78 9 C 0 adjust levels or to select from a range of op
ページ9に含まれる内容の要旨
Picture menu MENU Press the MENU button. OK Move to choose Picture menu. Access Picture menu. 12 3 45 6 78 9 C 0 Move to choose menu option. Adjust chosen option or access chosen menu. N EXIT Press the EXIT button at any time to go back to watching TV. TV Viewing mode The Viewing mode menu allows you to select three different Main menu screen settings - Dynamic, Normal and Cinema. In each Picture menu Viewing mode setting, Backlight, Contrast, Brightness, Sound menu Colour, Sharpness, Tint (i
ページ10に含まれる内容の要旨
Sound menu MENU Press the MENU button. OK Move to choose Sound menu. Access Sound menu. 12 3 45 6 78 9 Move to choose menu option. C 0 Adjust chosen option or access chosen menu. N EXIT Press the EXIT button at any time to go back to watching TV. TV OK Press the OK button after having adjusted some features to store the new settings as the default (replacing the factory setting). Bass Increase or decrease level to enhance or minimise lower, Main menu deeper sound output. Picture menu Treble In
ページ11に含まれる内容の要旨
Setup menu MENU Press the MENU button. OK Move to choose Setup menu. Access Setup menu. 12 3 45 6 78 9 Move to choose menu option. C 0 Adjust chosen option or access chosen menu. N EXIT Press the EXIT button at any time to go back to watching TV. TV Q-Link Allows you to select which AV terminal is to be used for data Main menu communication between this TV and a com patible recording device. Choose from Off, AV1 and AV2. See page 17. Picture menu Control HDMI control allows for the external eq
ページ12に含まれる内容の要旨
Tuning menu – overview MENU Press the MENU button. OK Move to choose Setup menu. Access Setup menu. 12 3 45 6 Move to choose Tuning menu. 78 9 C 0 Access Tuning menu. N Move to choose menu option. Adjust chosen option or access chosen menu. TV EXIT Press the EXIT button at any time to go back to watching TV. OK Press the OK button after having adjusted some features to store the new settings as the default (replacing the factory setting). Programme edit Access in order to customize your program
ページ13に含まれる内容の要旨
Tuning menu – Programme edit MENU Press the MENU button. OK Move to choose Setup menu. Access Setup menu. 12 3 45 6 Move to choose Tuning menu. 78 9 C 0 Access Tuning menu. N Move to choose Programme edit. Access Programme edit. TV Move to choose programme position (e.g., Prog. 3). Make required change, e.g., moving a programme channel (see the relevant procedure below). EXIT Press the EXIT button at any time to go back to watching TV. OK Press the OK button after having adjusted some features
ページ14に含まれる内容の要旨
Tuning menu – Programme edit Renaming a programme channel Move to the Name column. Programme edit Prog. Chan. Name Lock Sys 1 : CH44 Off SC1 2 : CH51 XYZ Off SC1 Choose the new character. The box at the bottom of the screen shows 3 : CH41 FTP Off SC1 4 : CH47 123 Off SC1 the character currently selected. 5 : CH37 456 Off SC1 ABCDEFGHIJKLMNOPQRST UVWXYZ+-. 0123456789 Move to the next character position. Continue until renaming is done. OK Press the OK button to store the n
ページ15に含まれる内容の要旨
Tuning menu – Auto setup Auto setup automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your TV to receive the local stations. MENU Press the MENU button. OK Move to choose Setup menu. 12 3 Access Setup menu. 45 6 78 9 Move to choose Tuning menu. C 0 Access Tuning menu. N Move to choose Auto setup. TV Access Auto setup. Press to confi rm start. OK Notes: • If you proceed with the next step all tuning data will be erased (all stations and their progra
ページ16に含まれる内容の要旨
Tuning menu – Manual tuning It is possible to retune individual programme positions: MENU Press the MENU button. OK Move to choose Setup menu. 12 3 Access Setup menu. 45 6 78 9 C 0 Move to choose Tuning menu. Access Tuning menu. N Move to choose Manual tuning. TV Access Manual tuning. Select the programme position to be tuned. 1 CH12 Press repeatedly until required station is found. Manual tuning OK When the desired station is found, press the OK button to store. 02
ページ17に含まれる内容の要旨
Q-Link Q-Link allows the television to communicate with a compatible VCR or DVD Recorder. For Q-Link communication to work, the TV must be connected to a recording device with the “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” logo using a “fully wired” Scart cable between the AV1 / AV2 terminal of the television and the appropriate terminal on your VCR or DVD Recorder. For connection to the appropriate Scart terminal on the recording device, refer to the devic
ページ18に含まれる内容の要旨
Aspect Controls The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including widescreen cinema format pictures. OK Press the ASPECT button repeatedly to move through the nine aspect ASPECT options: Auto aspect, 16:9, 14:9, Just, 4:3, 4:3 Full (HD signal), Zoom1, 12 3 45 6 Zoom2 and Zoom3 78 9 C 0 OR N Press the ASPECT button. Whilst the on screen selector keys are Red Green displayed, use the Red or Green buttons to move in either direction through th
ページ19に含まれる内容の要旨
Aspect Controls 16 : 9 16 : 9 16:9 will display a true 16:9 (anamorphic) picture with no aspect distortions. 16 : 9 14 : 9 14 : 9 14:9 will display a 14:9 picture at its standard 14:9 size without any stretching. 14 : 9 Just Just Use Just when you wish to expand a 4:3 picture to fi ll the whole screen (rather than watching a programme with black stripes down the left and right sides of the picture). The 4:3 picture will be stretched horizontally so that the image fi lls the screen, this is done
ページ20に含まれる内容の要旨
VCR / DVD operation The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital Versatile Disc) equipment. Some VCR and DVD equipment have different functions, so to ensure compatibility please refer to the equipment’s instruction book or consult your dealer for details. Standby Press to switch the VCR, DVD or DVD recorder to Standby mode. Press again to switch back on. VCR / DVD switch VCR DVD Use this switch to select whether controls operate the DV
