ページ1に含まれる内容の要旨
Model No.
TH-103VX200U
TH-85VX200U
Operating Instructions
High Defi nition Plasma Display
Before connecting, operating or adjusting this product,
English
please read these instructions completely.
Please keep this manual for future reference.
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per s
ページ3に含まれる内容の要旨
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose o
ページ4に含まれる内容の要旨
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://p
ページ5に含まれる内容の要旨
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
ページ6に含まれる内容の要旨
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corporation.) • Pedestal .....................................................TY -ST85P12 (for TH-85VX200U) TY-ST103PF9 (for TH-103VX200U) • Floor stand ................................................TY -
ページ7に含まれる内容の要旨
Safety Precautions For suffi cient ventilation; Securely insert the power cord plug as far as it will go. (TH-85VX200U) • If the plug is not fully inserted, heat may be generated If using the pedestal (optional accessory), leave a space which could cause fi re. If the plug is damaged or the of 3 15/16” (10 cm) or more at the top, left and right, wall socket plate is loose, they should not be used. and 6.0” (15 cm) or more at the rear, and also keep the Do not handle the power cord plug with wet
ページ8に含まれる内容の要旨
Safety Precautions 3D Safety Precautions WARNING Small Parts 3D Eyewear contains small parts (battery and specialised band, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly Do not disassemble or modify the 3D Eyewear. Lithium Battery Batteries must not be exposed to excessive heat such as sunshine, fi re or the like. CAUTION To enjoy 3D images safely and comfortably, please read these instructions fully. Use for commercial applications a
ページ9に含まれる内容の要旨
Safety Precautions Viewing 3D Content Content for 3D viewing includes commercially available Blu-ray discs, 3D broadcasts, etc. When preparing your own 3D content, ensure that it is properly produced. Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing medical conditions. Please stop using the 3D Eyewear immediately, if you feel tired, are not feeling well or experience any other uncomfortable sensation. Take an appropriate
ページ10に含まれる内容の要旨
Accessories Accessories Supplied Check that you have the Accessories and items shown Remote Control Batteries for Fixing band × 2 TH-85VX200U TH-103VX200U Transmitter the Remote TMME203 Clamper × 1 AC cord Control N2QAYB000562 TMM15412-2 Transmitter (AA Size × 2) Use the clamper when connecting a LAN cable. (see page 58) 3D Eyewear set Screwdriver These accessories will be used by professional installers when (see page 23) they install the unit. TH-85VX200U Eyebolt cap × 1 Eyebolt × 1 Allen
ページ11に含まれる内容の要旨
Connections AC cord connection and fi xing, cable fi xing TH-85VX200U AC cord of this model is fi xed and connected to the main unit. No AC cord needs to be connected. – How to Unfasten the AC cord Loosen the fi xing band securing the AC cord. To loosen: Push the catch Pull – Cable fi xing bands Secure any excess cables with bands as required. Note: Two fi xing bands are supplied with this unit. In case of securing cables at three positions, please purchase it separately. Pass the attached cable To
ページ12に含まれる内容の要旨
Connections TH-103VX200U – AC cord fi xing Unplug the AC cord Close Push until the hook clicks. Unplug the 1 Plug the AC cord into Open AC cord the display unit. pressing the 2. Pull off. Plug the AC cord until two knobs. Note: it clicks. Note: Make sure that the 1. Keep the 2 Fix the AC cord with AC cord is locked on both When disconnecting the AC knob pressed. the clamper. the left and right sides. cord, be absolutely sure to disconnect the AC cord plug – Cable fi xing bands at
ページ13に含まれる内容の要旨
Connections Video equipment connection SERIAL 3D SHUTTER OUT AUDIO OUT Control the Plasma Display Connect the 3D IR Connect to sound by connecting to PC. TRANSMITTER equipment. (see page 16) (optional accessory). (see below) LAN COMPONENT/RGB IN PC IN AV IN (HDMI 1-4) SLOT Connect to a Component/RGB Video HDMI Input Terminal PC Input Terminal Terminal board network to control Input Terminal (see page 14) Connect to video (optional accessories) the unit. (see page 14) terminal of PC or insert
ページ14に含まれる内容の要旨
Connections HDMI connection [Pin assignments and signal names] Pin No. Signal Name Pin No. Signal Name T.M.D.S Clock 1 11 T.M.D.S Data2+ Shield T.M.D.S Data2 2 12 T.M.D.S Clock- Shield 3 T.M.D.S Data2- 13 CEC 4 T.M.D.S Data1+ Reserved 14 HDMI cables T.M.D.S Data1 5 (N.C. on device) Shield 6 15 T.M.D.S Data1- SCL 7 16 T.M.D.S Data0+ SDA T.M.D.S Data0 DDC/CEC 8 17 Shield Ground HDMI cables 9 18 T.M.D.S Data0- +5V Power 10 19 Hot Plug Detect T.M.D.S Clock+ HDMI HDMI HDMI HDMI AV OUT AV OUT AV
ページ15に含まれる内容の要旨
Connections PC Input Terminals connection (Female) COMPUTER Audio Stereo mini plug (M3) Connect a cable which matches the audio output terminal on the computer. Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable (Male) Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 65), adjustment values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight PC input
ページ16に含まれる内容の要旨
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. Note: To use serial control for this unit, make sure to set the “CONTROL I/F SELECT” in the “NETWORK SETUP” menu to “RS-232C”. (see page 55) (Male) COMPUTER RS-232C Straight cable (Female) 9 8 7 6 52 4 3 1 D-sub 9p Notes: • Use the RS-232C straight cable to connect the computer Pin layout for SERIAL Terminal to the Plasma Display. • The computer shown is for example purpos
ページ17に含まれる内容の要旨
Power ON / OFF Connecting the AC cord plug to the Plasma Display. For TH-103VX200U Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 12) Connecting the plug to the Wall Outlet. Note: For TH-103VX200U When disconnecting the AC cord, be absolutely sure to Right side surface disconnect the AC cord plug at the socket outlet fi rst. Main Power Press the Power switch on the Plasma Display to turn the On / Off Switch set on: Power-On. Power Indicator: Green Remote Con
ページ18に含まれる内容の要旨
Power ON / OFF When fi rst switching on the unit Following screen will be displayed when the unit is turned on for the fi rst time. Select the language with the remote control. Unit buttons are invalid. OSD LANGUAGE OSD LANGUAGE English (UK) 1 Select the language. Deutsch Français 2 Set. Italiano Español ENGLISH (US) Notes: Ру сский • Once the language is set, this screen won’t be displayed when switching on the unit next time. • After the setting, language selection can be done from the SET
ページ19に含まれる内容の要旨
Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. INPUT HDMI1 HDMI2 HDMI input terminals in HDMI 1 to HDMI 4. HDMI3 HDMI4 COMPONENT Component or RGB input terminal in COMPONENT/RGB IN.* PC PC input terminal in PC IN. * “COMPONENT” may be displayed as “RGB” depending on the setting of “COMPONENT/RGB-IN SELECT”. (see page 44) When an optional Terminal Board is installed: INPUT HDMI1 HDMI2 HDMI3 HDMI4 S
ページ20に含まれる内容の要旨
Basic Controls Main Unit Right side Enter / Aspect button surface (see page 22, 27) Up / Down button ENTER/ When the menu screen is displayed: “▲” : press to move the cursor up “▼” : press to move the cursor down (see page 27) MENU MENU Screen ON / OFF Infrared transmitter for 3D INPUT Each time the MENU button is pressed, the menu Eyewear screen will switch. (see page 27) Note: Do not place any objects Normal Viewing PICTURE SETUP between the transmitter and SOUND POS. /SIZE 3D Eyewea
