ページ1に含まれる内容の要旨
Model No.
TH-50PB2W
TH-65PB2W
Operating Instructions
Display Operations
Interactive Plasma Display
Please read these instructions before operating your set
English
and retain them for future reference.
ページ2に含まれる内容の要旨
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://p
ページ3に含まれる内容の要旨
Important Safety Notice WARNING 1) To prevent damage which may result in fi re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (fl ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) No naked fl ame sources, such as lighted candles, should be placed on / above the set. 2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualifi ed service personnel. 3)
ページ4に含まれる内容の要旨
Safety Precautions WARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corporation.) • Pedestal .................................................................................... TY -ST42P50 (for TH-50PB2W), TY-ST65P20 (for TH-65PB2W) • Mobile stand for Display ..........
ページ5に含まれる内容の要旨
Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display. Do not stick any foreign objects into the Plasma Display. • Do not insert any metal or fl ammable objects into the ventilations holes or drop them onto the Plasma Display, as doing so can cause fi re or electric shock. Do not remove the
ページ6に含まれる内容の要旨
Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display. • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result. Be sure to disconnect all cables before moving the Plasma Display. • If the Plasma Display is moved while some
ページ7に含まれる内容の要旨
Accessories Accessories Supply Check that you have the accessories and items shown Operating Software CD-ROM × 1 Remote Control Batteries for the Remote Instruction book Transmitter Control Transmitter N2QAYB000691 (R6 (UM3) Size × 2) • Panasonic WhiteBoard Software • Operating Instructions Display Operations Network Operations Electronic Pen Operations • Software license statements GNU GENERAL PUBLIC LICENSE GNU LESSER GENERAL PUBLIC LICENSE Power supply cord Clampe
ページ8に含まれる内容の要旨
Connections AC cord connection and fi xing, cable fi xing AC cord fi xing Unplug the AC cord Unplug the AC cord pressing the two knobs. Plug the AC cord into the display unit. Note: Plug the AC cord until it clicks. When disconnecting the AC cord, be Note: Make sure that the AC cord is locked on absolutely sure to disconnect the AC both the left and right sides. cord plug at the socket outlet fi rst. When using the Wall-hanging bracket (vertical) (for TH-50PB2W) Note: When using the Wall-hanging
ページ9に含まれる内容の要旨
Connections Speaker connection For TH-50PB2W Please use 6 Ω/8 W speaker. For TH-65PB2W Please use 8 Ω/10 W speaker. 1 2 (L) (L) Red Red (R) (R) Black Black Return the lever. While pressing the lever, insert the core wire. Video equipment connection Ex. TH-65PB2W AUDIO 2 IN: Audio input terminal shared SLOT: Terminal board (optional with DVI-D IN and PC IN. accessories) insert slot (see page 11, 12) (see page 4) Note: The right side slot is for terminal board PEN ADAPTER, MEMORY/(CHARGE),
ページ10に含まれる内容の要旨
Connections VIDEO and COMPONENT / RGB IN connection Note: Additional equipment, cables and adapter plugs shown are not supplied with this set. VIDEO OUT L RCA-BNC Adapter plug AUDIO VCR R OUT Stereo mini plug (M3) AUDIO 1 IN: Shared with VIDEO and Notes: COMPONENT/RGB IN • Change the “Component/RGB-in select” setting in the “Setup” menu to “Component” (when Component signal connection) or “RGB” (when RGB signal connection). (see page 46) • Signals input to COMPONENT/RGB IN terminals corresp
ページ11に含まれる内容の要旨
Connections HDMI connection [Pin assignments and signal names] Signal name Signal name Pin No. Pin No. T.M.D.S Clock 1 11 T.M.D.S Data2+ Shield T.M.D.S Data2 2 12 T.M.D.S Clock- Shield 3 13 T.M.D.S Data2- CEC 4 T.M.D.S Data1+ Reserved 14 T.M.D.S Data1 5 (N.C. on device) 3 1 19 Shield HDMI cable 6 15 T.M.D.S Data1- SCL 7 T.M.D.S Data0+ 16 SDA T.M.D.S Data0 DDC/CEC 8 17 Shield Ground 9 18 T.M.D.S Data0- +5V Power 18 4 2 HDMI 10 19 Hot Plug Detect AV OUT T.M.D.S Clock+ DVD player Note: Addit
ページ12に含まれる内容の要旨
Connections PC Input Terminals connection Shared with DVI-D IN. COMPUTER Conversion adapter (if necessary) (Female) Mini D-sub 15p RGB PC cable (Male) Audio Stereo mini plug (M3) Connect a cable which matches the audio output terminal on the computer. Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 60), adjustment values such as for the standard picture positions and sizes have already been stored in this unit. You can add
ページ13に含まれる内容の要旨
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. Note: T o use serial control for this unit, make sure to set the “Control I/F Select” in the “Network Setup” menu to “RS-232C”. (refer to “Operating Instructions, Network Operations”) (Male) COMPUTER 9 8 7 6 52 4 3 1 Pin layout for SERIAL Terminal RS-232C Straight cable (Female) D-sub 9p Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display. •
ページ14に含まれる内容の要旨
Power On / Off Connecting the AC cord plug to the Plasma Display. Connecting the plug to the Wall Outlet Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type fi tted to your set. INPUT MENU -/ VOL +/ ENTER/ • When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket Power Indicator outlet fi rst. Remote Control Sensor Press the Power switch on the Plasma Display to turn the set on: Power-On. Power I
ページ15に含まれる内容の要旨
Power On / Off When fi rst switching on the unit Following screen will be displayed when the unit is turned on for the fi rst time. Select the items with the remote control. Unit buttons are invalid. OSD Language Day/Time Setup Display orientation OSD Language Day/Time Setup Display orientation English (UK) Time MON 99:99 Landscape Deutsch Set Portrait Français Day MON Italiano 99:99 Time Español ENGLISH (US) Day/Time Setup Time MON 99:99 Set Day TUE 10:00 Time Select Set 1 1 1
ページ16に含まれる内容の要旨
Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: PC NETWORK WHITEBOARD VIDEO COMPONENT* HDMI DVI PC: PC input terminal in PC IN. NETWORK: Network input terminal in LAN or WIRELESS MODULE. WHITEBOARD: WhiteBoard mode. This mode can be selected when the “WHITEBOARD function” is “On”. (see page 34) VIDEO: Video input terminal in AV IN (VIDEO). COMPONENT*: Compone
ページ17に含まれる内容の要旨
Basic Controls Main Unit Brightness Sensor Detects the brightness in the viewing environment Remote control sensor Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 22) Enter / Aspect button INPUT MENU -/ VOL +/ ENTER/ (see page 19, 22) Main Power On / Off Switch MENU Screen ON / OFF Each time the MENU button is pressed, the menu Power Indicator screen will switch. (see page 22) The Po
ページ18に含まれる内容の要旨
Basic Controls Remote Control Transmitter OFF TIMER button The Plasma Display can be preset to switch to stand-by after a fi xed period. The setting changes ACTION button to 30 minutes, 60 minutes, 90 minutes and 0 Press to make selections. minutes (off timer cancelled) each time the button is pressed. ASPECT button Press to adjust the aspect. 30 min 60 min 90 min (see page 19) 0 min (Cancel) When three minutes remain, “Off timer 3 min” Standby (ON / OFF) button will fl ash. The Plasma Displ
ページ19に含まれる内容の要旨
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Note: Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand the picture, you may be violating the copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other people for commercial purposes without the
ページ20に含まれる内容の要旨
Digital Zoom This displays an enlargement of the designated part of the displayed image. Display the operation guide. 1 Exit Press to access Digital Zoom. The operation guide will be displayed. 1 During Digital Zoom, only the following buttons can be operated. [Remote control] OFF TIMER button [Unit] VOL button INPUT MENU -/ VOL +/ ENTER/ MUTE button VOL button POSITION / ACTION button Select the area of the image to be enlarged. 2 Press on the enlargement location to select. The cursor will
