ページ1に含まれる内容の要旨
32" TFT LCD TV
NLT-32W
32inch
ページ2に含まれる内容の要旨
Warnings WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamatio
ページ3に含まれる内容の要旨
Warnings Service Never remove the back cover of the TV, this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call your nearest NEC Service Centre. Connect the antenna cable to the connection marked Ant. (on the rear). For best reception, use an outdoor antenna. Location Position your TV so that no bright light or sunlight will shine directly on the screen. Do not expose the TV to vibration, moisture, dust or heat. Also ensure that the TV is pl
ページ4に含まれる内容の要旨
Contents Before operating the set, please read this manual carefully. Warnings 2~3 Contents 4 Supplied Accessories 5 Controls 6~8 Controller of panel 6 Remote controller 7~8 Basic Operation 9 Turning the TV On and Off 9 Programme selection 9 Volume adjustment 9 Q.View 9 Sound mute function 9 On screen Language selection 9 On Screen Menus and Displays 10 Setting up TV Programme 11~13 Auto Programme 11 Manual Programme 12 Programme Edit 13 Picture Control 14 Manual picture control 14 A
ページ5に含まれる内容の要旨
Supplied Accessories L Make Sure the following accessories are provided with Product. 1. AC Cord 3. Batteries (type AAA) 2. Remote controller 5. PC IN cable 4. Owner’s manual 32" TFT LCD TV NLT-32W 32inch 6. PC Audio IN cable 22 5
ページ6に含まれる内容の要旨
Controls 1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. 3. + PR - (Programme Up/Down) Selects a programme or a menu item. 4. + VOL - (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. 5. TV/AV Selects TV, COMPONENT, VIDEO, S-VIDEO, RADIO(Only when the set is Radio On.), PC Analog, PC Digital or DTV mode./ Clears the menu from the screen. 6. Power Indicator Illuminates in red when the TV is in standby mode./ Illuminates in green when the TV is switched on. Illuminates in
ページ7に含まれる内容の要旨
Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode. 2. MUTE Turns the sound on and off. 3. NUMBER buttons Selects programme numbers. 4. TV/AV Selects TV, COMPONENT, VIDEO, S-VIDEO, RADIO(Only when the set is Radio On.), PC Analog, PC Digital
ページ8に含まれる内容の要旨
Controls 12. VOLÏq (Volume Up/Down) Adjusts the sound level. Adjusts menu settings. 13. TV/PC Selects TV or PC mode directly. 14. PSM (Picture Status Memory) Recalls your preferred picture setting 15. SSM (Sound Status Memory) Recalls your preferred sound setting 16. ARC You can watch TV in various picture formats; Auto, 16:9, 14:9, 4:3, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom. Repeatedly press the ARC button to select your desired picture format. Note. 16:9 and 4:3 in PC mode are available. 17. TELETEX
ページ9に含まれる内容の要旨
Basic Operation Turning the TV On and Off Standby Setup: The AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the ON/OFF button on the side panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the POWER button on the remote controller or the TV itself to turn the TV on. 2. Press the Power button again on the remote controller or the ON/OFF button the TV itself to turn the TV off. Note : If the TV is on and the POWER
ページ10に含まれる内容の要旨
On Screen Menus and Displays 1. Press the MENU button to display main menu. Equalizer 2. Press the PRxy button to select menus-Picture, Flat Sound, Special, Setup. Music 3. Adjust each menu with the VOLÏq button. Movie 4. Press the MENU button to return to preceding Speech User menu. 0.1 0.5 1.5 5.010KHz 5. Press the TV/AV button to finish adjusting menu. Position:▲▼ Back:MENU Exit:TV/AV Picture Menu Picture q Contrast 90 Clock Sound
ページ11に含まれる内容の要旨
Setting up TV Programme Once you have preset the programmes, you will be able to use the PRxy or NUMBER buttons to scan the Auto Programme programmes you programmed. System BG Programmes can be tuned using automatic or manual Start modes. Auto Programme All programmes that can be received are stored by this Position:▲▼ Adjust:◀▶ Back:MENU Exit:TV/AV method. It is recommended that you use Auto programme during installation of this set. 1. Press the MENU button. 2. Select the Setup menu, then pre
ページ12に含まれる内容の要旨
Setting up TV Programme Manual Programme Manual Programme Manual Programme lets you manually tune and arrange Programme 1 the programmes in whatever order you desire. Also you Channel 69 can assign a programme name with 5 characters to each Table V/UHF System BG programme number. Search ▶▶▶ Memorize 1. Press the MENU button. Name ---
ページ13に含まれる内容の要旨
Setting up TV Programme Programme Edit Programme Edit This function enables you to delete or skip the stored P00----- P05----- P01----- P06----- programmes. P02----- P07----- Also you can move some programmes to other P03----- P08----- P04----- P09----- programme numbers or insert a blank programme data into ■Delete ■Name the selected programme number. ■Move ■Skip 1. Press the MENU button. Position:▲▼◀▶
ページ14に含まれる内容の要旨
Picture Control You can adjust picture Contrast, Brightness, Colour, Sharpness and Tint(only in NTSC mode) to the levels you prefer. Picture Manual Picture Control Contrast 90 1. Press the MENU button. Brightness 75 Colour 75 2. Select the Picture menu, then press VOLÏq. Sharpness 60 3. Press the PRxy button select a picture item. 4. Press the VOLÏq button to adjust the picture condition as yo
ページ15に含まれる内容の要旨
Sound Control You can select your preferred sound setting; Flat, Music, Sound Movie or Speech. You can also adjust the sound Equalizer ▶ frequency of equalizer, balance. If you switch AVL to on, Balance 0 the set automatically keeps on an equal volume level even AVL Off Surround Off if you change programmes. Sound Mode MONO 1. Press the MENU button. 2. Select
ページ16に含まれる内容の要旨
Sound Control Auto Sound Control * The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. SSM (Sound Status Memory) 1. Press the SSM button. 2. Press the SSM button repeatedly to select. Each press of the button changes the screen display as below. Flat → Music → Movie → Speech → User • Choose Flat for the standard factory settings. • Choose Music when watching music video or concerts. • Choose Movie when watching movies. • C
ページ17に含まれる内容の要旨
Other functions You can control other functions; Clock, Blue Back, Auto Special Sleep, Childlock, Radio and ARC menu. Clock ▶ Blue Back Off Clock Auto Sleep Off Childlock Off Setting the clock is necessary in order to use the various Radio Off timer features of the TV. You can set automatic TV On or ARC 16:9 Off time. Position:▲▼
ページ18に含まれる内容の要旨
Other functions Auto Sleep If you select Auto Sleep On the set will automatically switch itself to standby mode approximately ten minutes after a TV Channel stops broadcasting. 1. Press the MENU button. 2. Select the Special menu, then press VOLÏq. 3. Press the PRxy button to select Auto Sleep. 4. Press the VOLÏq button to select On. 5. Press the TV/AV button to return to normal TV viewing. Childlock Childlock menu is necessary in order to disable the buttons on the side panel of the set. Es
ページ19に含まれる内容の要旨
Radio Control This function is possible only when the set is in Radio mode.(Radio mode is displayed when the Setting for special menu is radio On.) Radio Setup 1. Use TV/AV button on remote controller to select Mode Auto Frequency 87.5 MHz Radio mode. Programme 1 Memorize 2. Press the MENU button to set Radio Setup menu. Delete Auto Programme ▶ 3. Press the VOLÏq button repeatedly to select Off Time Off Edit Name ▶ Mode Auto or Manual. Name -------- * When the Radio Setup Mode is Auto, only th
ページ20に含まれる内容の要旨
Other functions Calling the programme list Programme List You can check the programmes stored in the memory P00 ----- P05 ----- by displaying the programme LIST. P01 ----- P06 ----- P02 ----- P07 ----- P03 ----- P08 ----- Displaying programme list P04 ----- P09 ----- 1. Press the LIST button to display the Programme list menu. Position:▲▼◀▶ Confirm:OK Exit:TV/AV The programme list appears on the screen. One programme list contains ten p