ページ1に含まれる内容の要旨
10 Switch Settings, Functions and Indicators
Marshall Electronics
1910 East Maple Ave.
Tally Indicators El Segundo, CA 90245
Tel.: 800-800-6608 • 310-333-0606
Fax: 310-333-0688
www.LCDRacks.com
Email: sales@lcdracks.com
V-R70P-SD
Users Guide Users Guide
Power On/Off switch
Image Adjustment Controls
Illuminates red when system power
Note: Tint only functions when NTSC
is present
Video or S-Video are selected
Illuminates Green when monitor is ON
HDSDI/SDI Signal indication Lights f
ページ2に含まれる内容の要旨
1 Product Overview 7 Faceplate Cleaning The V-R70P-SD features Marshall’s proprietary TFT-MegaPixel™ display system and represents leading edge technology in LCD When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean imaging for broadcast and professional video applications. This is a low cost stand alone monitor and is constructed with a durable micro fiber clothe, or cheese clothe. Do not use paper towels. Paper towel fibers are coa
ページ3に含まれる内容の要旨
1 Product Overview 7 Faceplate Cleaning The V-R70P-SD features Marshall’s proprietary TFT-MegaPixel™ display system and represents leading edge technology in LCD When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean imaging for broadcast and professional video applications. This is a low cost stand alone monitor and is constructed with a durable micro fiber clothe, or cheese clothe. Do not use paper towels. Paper towel fibers are coa
ページ4に含まれる内容の要旨
Optional Accessories (continued) 2-channel sequential charger with a built-in 60W power sup- Sequential 2 channel charger IDX-VL-2Plus ply. Charges 2 ENDURA E series batteries in fewer than 5 hours. One 10’ XLR cable included. Weighs only 2 lbs Economically charges 4 ENDURA E series batteries in Sequential 4 channel charger IDX-VL-4 under 6 hours using Full Power Charge (FPC) method Simultaneous 4 channel charger IDX-VL-4S Charges 4 ENDURA E series batteries in 2.5 hours or less 55 W Lit
ページ5に含まれる内容の要旨
5 Electrical Specifi cations Display (Viewing Area) 7” (6.14”H × 3.27”V) (156.0mm x 83.28mm) Viewing Angles 130°H x 120°V Resolution (RGB Dots) 800H x RGB x 480V (1.2 million pixels) Contrast Ratio 400:1 Color temperature D65 (6500° Kelvin) Color Gamut SMPTE-C of CEI-1931 Gamma 2.2 Luma Linearity Typical +/- 3% with 5 ire increments (0 to 10 ire) Dot Pitch 0.065mm H x 0.173mm V Pixel Response 30ms average Screen Refresh Rate 50/60 Frames per second Backlight Type / Life CCFL / 10,000 to 20,00
ページ6に含まれる内容の要旨
10 Switch Settings, Functions and Indicators Marshall Electronics 1910 East Maple Ave. Tally Indicators El Segundo, CA 90245 Tel.: 800-800-6608 • 310-333-0606 Fax: 310-333-0688 www.LCDRacks.com Email: sales@lcdracks.com V-R70P-SD Users Guide Users Guide Power On/Off switch Image Adjustment Controls Illuminates red when system power Note: Tint only functions when NTSC is present Video or S-Video are selected Illuminates Green when monitor is ON HDSDI/SDI Signal indication Lights f
