ページ1に含まれる内容の要旨
Français Español
English
User Manual
Manuel de l’utilisateur
Guía del usuario
42MF439B
LCD TV
1-866-341-3738
1-866-341-3738
1-866-341-3738
HIGH DEFINIT ON TELEVISION
MODEL NUMBER SERIAL NUMBER
ページ2に含まれる内容の要旨
Return your Product Registration Card or register online at www.magnavox.com/support today to get the very most from your purchase. Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don’t miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.com/support to ensure: *Proof of Purchase *Additional Benefits *Product Safety Returning the enclosed card Notification Registering your produ
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 16. 1. Read these instructions. Tilt/Stability - All televisions must comply with 2. Keep these instructions. recommended international global safety standards for tilt 3. Heed all warnings. and stability properties of its cabinet design. 4. Follow all instructions. • Do not compromise these design standards by applying 5. Do not use this apparatus near water. excessive pull force to the front, or top, of the cabinet 6. Cle
ページ4に含まれる内容の要旨
NTRODUCTION I Precaution Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. FCC WARNING This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an u
ページ5に含まれる内容の要旨
WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION PREPARATION front side Trademark Information • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. • Products that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency. Supplied Access
ページ6に含まれる内容の要旨
NTRODUCTION I Features Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 • DTV/TV/CATV - You can use your remote control to select INTRODUCTION channels which are broadcast in digital format and Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 conventional analog format. Also, cable s
ページ7に含まれる内容の要旨
WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION PREPARATION 1. infrared sensor window Control Panel Receives infrared rays transmitted from the remote control. 2. POWER ON indicator Lights up green when power is on. 3. STAND BY indicator Lights up red when power is off. 4. VOLUME + / - (p. 15) Press to adjust the volume or move right (+) / left (-) through the main menu items. 5. MENU V V (p. 14) Press to display the main menu. 6. CHANNEL + / - (p. 15 / p. 16) 1 Press to
ページ8に含まれる内容の要旨
NTRODUCTION I Remote Control Function 6. BACK (p. 17) Press to return to the previous menu operation. 1 7. SAP (p. 16) Digital mode (DTV) 2 11 • P ress to select the audio language. Analog mode (TV) • Press to select the audio mode. 3 12 8. MUTE (p. 15) 4 Press to turn the sound on and off. 9. VOL + / - (p. 15) Press to adjust the volume. 10. Number buttons (p. 15) 5 Press to select channels. 13 6 • (dot) 7 14 • Press to shift the subchannel from the main channel. 11. FORMAT (p.
ページ9に含まれる内容の要旨
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. Before you connect... Be sure your antenna or other device is connected properly before plugging in the AC power cord. Antenna Connection Connect the RF coaxial cable on your home outlet to the
ページ10に含まれる内容の要旨
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. External Device Connection [HDMI Connection] HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. e.g.) side or rear of this unit HDMI cable HD
ページ11に含まれる内容の要旨
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [Component Video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s COMPONENT video input jack, connect RCA audio cables to the audio L/R jacks below the component video connector. RCA component video cable e.g.) (green
ページ12に含まれる内容の要旨
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [Audio Output Connection] Digital (for digital broadcasting only) If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Use a digital audio coaxial cable to connect the unit to external digital audio devices. A nalog (for both analog and digital broadcasting) If you connect this unit to an exte
ページ13に含まれる内容の要旨
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Supplied accessories used in this connection are as follows: • cable management tie x 1 • AC power cord x 1 [USB Flash Memory] Cable Management This unit offers easy playback JPEG pictures and MP3 Attach the supplied cable management tie first into the musics. holes on the lower side of the rear of this unit shown Insert the USB flash memory to the USB terminal shown as below. Keep the cables through this h
ページ14に含まれる内容の要旨
REPARATION P These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup This section will guide you through the unit’s initial setting which includes Use [Cursor s / B] to select the desired location setting, 4 selecting a language for your on-screen menu and autoprogram, which then press [OK]. automatically scans and memorizes viewable channels. Initial Setup S Before you begin: Select “Retail” or “Home” for your location. Make
ページ15に含まれる内容の要旨
INTRODUCTION OPTIONAL SETTING TROUBLESHOOTING INFORMATION PREPARATION WATCHING TV ATCHING TV W Channel Selection Volume Adjustment Select channels by using [CH + / -] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. • To select the memorized channels, use [CH + / -] or [the Number buttons]. • To select the non-memorized channels, use Use [VOL + / -] to adjust the audio volume. [the Number b
ページ16に含まれる内容の要旨
ATCHING TV W Still Mode Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press [FREEZE] to pause the image shown on the TV Press [SAP] to display the currently selected audio screen. mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel. FREEZE 11 • The sound output will not be paused. SAP /
ページ17に含まれる内容の要旨
INTRODUCTION OPTIONAL SETTING TROUBLESHOOTING INFORMATION PREPARATION WATCHING TV TV Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO] to display the details of the currently Press
ページ18に含まれる内容の要旨
ATCHING TV W TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [FORMAT] repeatedly to switch the TV aspect ratio. For 16:9 video signal For 4:3 video signal Zoom Normal Normal 16:9 Wide Movie Expand Wide Movie Expand Normal Normal Display a 16:9 picture at its original size. Display a 4:3 picture at its original size. Sidebars appear Zo
ページ19に含まれる内容の要旨
INTRODUCTION WATCHING TV TROUBLESHOOTING INFORMATION PREPARATION OPTIONAL SETTING PTIONAL SETTING O Main Menu Autoprogram This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the TV press [MENU]. For more details, see the reference page for each item. to a different area after the initial setting, or if you restore the DTV channel The main menu consists of the function setting items below. you deleted, you
ページ20に含まれる内容の要旨
PTIONAL SETTING O Channel List Add Channels The channels selected here can be skipped when selecting the channels This function lets you add the channels that were not added by the using [CH + / -]. autoprogram due to the receptible condition at the initial setting. Those channels can still be selected with [the Number buttons]. Press [MENU] to display the main menu. Press [MENU] to display the main menu. 1 1 Use [Cursor K/ L] to select “SETUP”, then press [OK]. Use [Cursor K/ L] to
