ページ1に含まれる内容の要旨
42MF 230A
42''Plasma TV
Model No
Serial No
English
ページ2に含まれる内容の要旨
CONTENT IMPORTANT SAFETY INSTRUCTIONS................................................................................ .1 FCC Notice ...................................................................................................................... .2 Precautions and Reminders .................................................................................... ……….3 Front Panel Control................................................................................................... …
ページ3に含まれる内容の要旨
, , Return your Product registration Card today to get the very most from your purchase. Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product registration Card at once to ensure: *Proof of *Product safe ty *Additional Benefits Purc hase Notification of Product Ownership Returning the enclosed card guarantees By registering your product, you'll receive Registering your product guarantees t
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read and follow all instructions. 14. Tilt/Stability- All televisions must comply with recommended 2. Do not operate this apparatus near water. international safety standards for tilt and stability properties 3. Do not install near any heat sources such as radiators, heat of its cabinet design. registers, stoves, or other apparatus (including amplifiers) • Do not compromise these design standards by applying tha
ページ5に含まれる内容の要旨
FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
ページ6に含まれる内容の要旨
Precautions and Reminders Do not place unit on uneven surfaces. Do not place the TV in confined spaces or in a box when using it. Unplug immediately if there is any Unplug immediately if other foreign malfunction, like no video, no audio, materials are put inside TV box or if the TV smoke or a bad odor. fell down. Do not throw any object like metals or flammable materials into the TV set. Prohibit/Avoid opening
ページ7に含まれる内容の要旨
Precautions and Reminders Do not use liquid cleaners or aerosol Avoid direct sunlight, dusty, high humidity cleaners to clean the display. Remember and smoky areas. to unplug the AC cord from the AC outlet before cleaning the display unit. Make sure to unplug the unit when not in Call service personnel to clean the use for a long period of time (2 days). internal part of the TV once a year. Do not cover or block any vents and Do not place the unit near
ページ8に含まれる内容の要旨
Front Panel Control - CH + - VOL + MENU MODE ⑦ ⑥ ⑤ ④ ③ ② ① IR: Remote Control Sensor. ① Power switch: Press to power on or power off the TV set. ② LED: Power Indicator. ③ ● Mode: Press to select input signal modes or use as Enter in Menu operation. ④MODE Menu: Press to enter Menu or exit Menu. ⑤MENU Left: Press to decrease the sound volume level or move Left in Menu operation. ⑥- VOL + Right: Press to i
ページ9に含まれる内容の要旨
Basic Installation Power 1. Connect TV Cable and Power Cord to this PDP TV Set. 2. Plug Power Cord to your home power outlet. 3. Check front panel LED for proper power connection: POWER KEY Blue color indicates this TV set is powered on; Red color indicates this TV set is in standby state. 4. Push POWER KEY on Remote Control or Power key on Front panel controls to switch the TV from stand by state
ページ10に含まれる内容の要旨
Remote Control Function “SOURCE” “POWER” To select input source. To switch TV set between power on and standby modes. “MUTE” To mute the audio output. “0~9 number” To enter TV channel number. “•(dot)” To enter sub channel number. “SLEEP” To Adjust sleep timer options. “LAST” To switch to the previously viewed channel. “EPG” To enter or exit Electronic Program Guide. “MTS” To select audio program options. “VOL- ( )/ VOL+( )” To decre
ページ11に含まれる内容の要旨
OSD Menu Descriptions Main Menu 1. Press “MENU” key on remote control or front panel controls to bring up Main Menu. 2. Press “ ” or “ ” to move the cursor up and down the sub menu list. 3. Press “ ” or “ ” to select sub menu item. 4. Press "Enter" to enter sub-item then use “ ” or “ ” to adjust. Setup Menu 1. Tuning Band: Select TV signal source between Air and Cable. Select Cable if you are connecting to a cable box and select Ai
ページ12に含まれる内容の要旨
OSD Menu Descriptions Video Menu . 1. Press “ ” or “ ” to move the cursor up or down the sub-item list. 2. Press "Enter" to enter the highlighted sub-item menu. 3. Press “ ” or “ ” to adjust the value of the sub-item. 4. Press "Enter" again to exit the sub-item. Contrast: Contrast adjustment, 0 ~ 100. Brightness: Brightness adjustment, 0 ~ 100. Color: Color chroma adjustment, 0 ~ 100. Tint: Tint adjustment, 0 ~ 100. Aspect Ratio: Aspe
ページ13に含まれる内容の要旨
OSD Menu Descriptions Feature Menu 1. Press “ ” or “ ” to move the cursor up or down the sub-item list. 2. Press "Enter" to enter the highlighted sub-item menu. 3. Press “ ” or “ ” to adjust the value of the sub-item. 4. Press "Enter" again to exit the sub-item. Time Set : Select your region for the TV to update the time. Sleep Timer: Select minutes into standby Off 30 60 90. Pass
ページ14に含まれる内容の要旨
OSD Menu Descriptions Closed Captions 1. Press “CC” key on remote control to select closed captions mode. NTSC TV: Off CC1 CC2 … ATSC TV: Off CS1 CS2 … 2. Select desired closed caption mode. CC1 NTSC TV CS1 ATSC TV EPG Press the “EPG” key on the remote control to display the Electronic Program Guide (EPG). A message EPG Message Window window will be displayed on screen. TV channel arrangement Ch 5.4 E
ページ15に含まれる内容の要旨
Specifications NOTE: *This model complies with the specifications listed below. *Designs and specifications are subject to change without notice. *This model may not be compatible with features and/or specifications that may be added in the future. Television System: Component INPUT: NTSC standard Rear Component include 2 Groups: ATSC standard (8VSB) Y : 1V(p-p), 75 ohm Pr/Cr: 0.7 V (p-p), 75 ohm Pb/Cb: 0.7 V (p-p), 75 ohm AUDIO: 150 mV (rms) Suggested resolutions: 1080i, 480p,
ページ16に含まれる内容の要旨
Troubleshooting Symptoms Checks Some channels are missing •Go to the Setup Menu (Menu Setup) and install the / are not found channels again, searching Air/Cable as appropriate. •Check the power cord and power outlet. •Check whether the TV power switch is on. •Verify the front panel LED is showing blue color. •Check connections for the selected input source. •Verify that external signal for the selected input is active. •Check Video/Audio settings. No Picture, No Sound
ページ17に含まれる内容の要旨
MAGNAVOX Limited Warranty One (1) Year Labor & One (1) Year Parts & One (1) Year Display Repair MAGNAVOX warrants this product against defect in material TO OBTAIN WARRANTY SERVICE IN THE U.S.A., PUERTO RICO, OR or workmanship, subject to any conditions set forth as U.S. VIRGIN ISLANDS… follows: Contact Magnavox Customer Care Center at: 1-800-705-2000 PROOF OF PURCHASE: You must have proof of the date of purchase to receive repair TO OBTAIN WARRANTY SERVICE IN CANADA… on the prod
