ページ14に含まれる内容の要旨
Installation Monitor Display Specifications (RGB-PC /DVI-PC Mode) Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency(KHz) Frequency(Hz) Frequency(KHz) Frequency(Hz) 31.468 70.09 35.156 56.25 640x350 37.861 85.08 37.879 60.31 800x600 31.469 70.08 48.077 72.18 720x400 37.927 85.03 46.875 75.00 31.469 59.94 53.674 85.06 35.000 66.66 832x624 49.725 74.55 37.861 72.80 48.363 60.00 640x480 37.500 75.00 1024x768 56.476 70.06 43.269 85.00 60.023 75.02 31.500 60.00 54.348 60.05 848x4
ページ15に含まれる内容の要旨
Operation Operation Operation - A inactive menu options aren’t available in this monitor. It’s only available to connect with PDP Tuner (RP-BA50). Turning on the Monitor Turning on the Monitor Turning on the Monitor just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT, MULTIMEDIA button on the remote control to
ページ16に含まれる内容の要旨
Operation Picture Menu Options Picture Menu Options - Each adjustment for the Picture menu options doesn’t effect other input sources. Readjust Picture menu options for each of the following sources. • RGB (PC) / DVI (PC), • RGB (DTV) / DVI (DTV) / Component (480p, 720p, 1080i) • Video / S-Video / Component (480i) APC (Auto Picture Control) APC (Auto Picture Control) - APC adjusts the Monitor for the best picture appearance. - When adjusting picture options (contrast, brightness, color, sharpne
ページ17に含まれる内容の要旨
Operation Sound Menu Options Sound Menu Options DASP (Digital Auto Sound Processing) DASP (Digital Auto Sound Processing) - This function lets you enjoy the best sound without any special adjustment because the Monitor has the appropriate sound options based on the program content. - When adjusting sound options (treble, bass, and balance) manually, DASP automatically changes to User. 1. Press the DASP button repeatedly to select the appropriate sound setup as shown below. Flat Music Movie Sport
ページ18に含まれる内容の要旨
Operation Timer Menu Options Timer Menu Options Clock Setup Clock Setup - If current time setting is erased by a power failure, if TV is unplugged or if the monitor is turned off with the ON/OFF button on the monitor, reset the clock. 1. Press the MENU button and then use button to select the TIMER menu. D / E TIMER TIMER 2. Press the G button and then use D / E button to select Clock. Clock G - - : - - Off timer 3. Press the G button and then use D / E button to set the hour. On time
ページ19に含まれる内容の要旨
Special Menu Options Special Menu Options Key Lock Key Lock - The monitor can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by disabling the front panel controls. - This Monitor is programmed to remember which option it was last set to even if you turn the monitor off. 1. Press the MENU button and then use button to select the SPECIAL menu. D / E SPECIAL SPECIAL 2. Press the G button and then use button to select Key lo
ページ20に含まれる内容の要旨
Operation Special Menu Options continued Special Menu Options continued Low Power Low Power - Low power reduces the plasma display power consumption. SPECIAL SPECIAL Language 1. Press the MENU button and then use D / E button to select the SPECIAL menu. Key lock ISM Method 2. Press the G button and then use D / E button to select Low power. Low power G On 3. Press the G button and then use D / E button to select On or Off. Set ID Off Caption / Text • When you select On, the screen d
ページ1に含まれる内容の要旨
PLASMA MONITOR
OWNER’S MANUAL
MODELS: MP-42PZ44/44H/45M/45V
MP-42PZ44A/44HA/45MA/45VA
MP-42PZ44B/44HB/45MB/45VB
MP-42PZ44K/44HK/45MK/45VK
MP-42PZ44R/44HR/45MR/45VR
MP-42PZ44S/44HS/45MS/45VS
MP-42PZ90/90H/91M/91V
MP-42PZ90A/90HA/91MA/91VA
MP-42PZ90B/90HB/91MB/91VB
MP-42PZ90K/90HK/91MK/91VK
MP-42PZ90R/90HR/45MR/91VR
MP-42PZ90S/90HS/91MS/91VS
Please read this owner’s manual thoroughly before operating
the Monitor.
Retain it for future reference.
Record model number and serial number of the Monitor.
ページ2に含まれる内容の要旨
Safety Instructions Safety Instructions Safety Instructions Safety instructions have two kinds of information, and each meaning of it is as below. * The violation of this instruction may cause serious injuries and even death. WARNING The violation of this instruction may cause light injuries or damage of the NOTES product. Take care of danger that may happen under specific condition. W WARNING 1. Do not place the Monitor in direct sunlight or near 6. Do not insert any object into the exhaust ven
ページ3に含まれる内容の要旨
Safety Instructions NOTE 1. Never touch the power plug with a wet hand. 8. Ensure the power cord doesn’t trail across any hot objects like a heater. This may cause an electric shock. This may cause a fire or an electric shock. 2. Disconnect from the mains and remove all con- nections before moving. 9. Do not plug when the power cord or the plug is damaged or the connecting part of the power out- 3. Do not place the Monitor in a built-in installation let is loose. such as a bookcase or rack. This
ページ4に含まれる内容の要旨
Contents Contents Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2~3 Screen Menu Options Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . .21 Introduction Setting Picture Format . . . . . . . . . . . . . . . . . . .21 Controls and Connection Options . . . . . . . . . . . .6 Picture Size Zoom . . . . . . . . . . . . . . . . . . . . . .21 Remote Control Key Functions . . . . . . . . . . . . . .7 Adjusting Horizontal/Vertical Position . . . . . .
ページ5に含まれる内容の要旨
Introduction Introduction Introduction What is a Plasma Display Panel (PDP)? If voltage is applied to gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At that instant, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. 160° - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the display is clear and visible to viewers anyw
ページ6に含まれる内容の要旨
INPUT SELECT MENU VOL. Introduction Controls Controls Front Panel Controls Front Panel Controls - This is a simplified representation of front panel. Here shown may be somewhat different from your monitor. ON/OFF E, D Buttons Main Power Button INPUT SELECT Button VOLUME (F,G) Buttons MENU Button Remote Control Sensor Power Standby Indicator Illuminates red in standby mode, Illuminates green when the Monitor is turned on Connection Options Connection Options - Connection panels shown may be som
ページ7に含まれる内容の要旨
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the monitor. - Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again as necessary. POWER INPUT SELECT Switches the monitor between Selects source: Video, S-Video, ON and STANDBY. Component, RGB, or DVI mode. MULTIMEDIA Selects: Component, RGB, or DVI DASP mode. Selects the sound
ページ8に含まれる内容の要旨
Installation Installation Installation Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. POWER SLEEP INPUT SELECT 1.5V APC DASP ARC PIP ARC PIP TWIN PICTURE SWAP SUB INPUT MENU MUTE VOL OK VOL 12 3 Owner’s Manual Batteries 45 6 BNC-RCA adapter 78 9 0 POWER STOP P/STILL REW PLAY FF REC WIN.SIZE WIN.POSITION SPLIT ZOOM ZOOM - ZOOM + Remote Control D-sub 15 pin cable Power Cord DVI-D Ca
ページ9に含まれる内容の要旨
Installation Installation Instructions Installation Instructions • The Monitor can be installed in different ways such as on a wall, or on a desktop etc. • Install this monitor only in a location where adequate ventilation is available. • It is recommended that MP-42PZ44/45V/90/91V series models only be used at an altitude of less than 3281 feet (1000m) to get the best quality picture and sound. • It is recommended that MP-42PZ44H/45M/90H/91M series models only be used at an altitude of less th
ページ10に含まれる内容の要旨
Installation Installation Instructions continued Installation Instructions continued Wall Mount: Vertical installation (MP-42PZ45M/45V/91M/91V series models only) Wall Mount: Vertical installation (MP-42PZ45M/45V/91M/91V series models only) Detailed installation instructions are included in the optional Vertical Wall Mounting Bracket Installation and Setup Guide, see your dealer. NOTE: When installing the monitor vertically, the front panel controls must be in the left side position. When insta
ページ11に含まれる内容の要旨
Installation External Equipment Connections External Equipment Connections NOTE: All cables shown are not included with the plasma display. VCR Setup VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor - Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed image may remain visible on the screen. How to
ページ12に含まれる内容の要旨
Installation External A/V Source Setup External A/V Source Setup How to connect 1. Connect the provided BNC-RCA adapter to the monitor’s VIDEO INPUT. 2. Connect the audio and video cables from the external YPB PR (MONO) equipment's output jacks to the monitor input jacks, as R AUDIO L R AUDIO L shown in the figure. When connecting the monitor to exter- REMOTE VIDEO AUDIO INPUT COMPONENT INPUT S-VIDEO AUDIO INPUT CONTROL INPUT nal equipment, match the jack colors (Video = yellow, Audio Left = whi
ページ13に含まれる内容の要旨
Installation PC Setup PC Setup - This Plasma display provides Plug and Play capability, meaning that the PC adjusts automatically to its settings. The monitor sends configuration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol. How to connect 1. To get the best picture quality, adjust the PC graphics card to 800x600, 60Hz. 2. Use the monitor’s RGB INPUT or DVI (Digital ( ) ( ) ( ) ( ) R L Visual Interface) INPUT port fo
