ページ1に含まれる内容の要旨
PLASMA TV
OWNER’S MANUAL
MODEL: DU-50PX10/10C
DU-42PX12X/12XC
Please read this manual carefully and completely before
operating your TV.
Retain this manual for future reference.
Record model number and serial number of the TV in the
spaces provided below.
See the label attached on the back cover and relate this
information to your dealer if you require service.
Model Number :
Serial Number :
LG Electronics U.S.A., Inc.
ページ2に含まれる内容の要旨
Warning Warning Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Th
ページ3に含まれる内容の要旨
Safety Instructions Safety Instructions Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. Observing the simple precautions discu
ページ4に含まれる内容の要旨
Safety Instructions Safety Instructions continued Safety Instructions continued 14. Outdoor Antenna Grounding 19. Servicing If an outside antenna or cable system is connected to the Do not attempt to service this product yourself as opening or product, be sure the antenna or cable system is grounded so removing covers may expose you to dangerous voltage or as to provide some protection against voltage surges and other hazards. Refer all servicing to qualified service per- built-up static charges
ページ5に含まれる内容の要旨
Contents Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . .25 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Manual Clock Setup . . . . . . . . . . . . . . . . . . . . .25 On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .25 Introduction Sleep Timer / Auto Off . . . . . . . . . . . . . . . . . . . .26 Controls . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Introduction Introduction Introduction What is a Plasma Display Panel (PDP)? A plasma display panel is the latest display technology and the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The PDP can be thought of as a descendant of the neon lamp and it can be also be viewed as a series of fluorescent lamps. How does it work? PDP is an array of cells, known as pixels, which are comprised of 3 sub pixels, corresponding to the
ページ7に含まれる内容の要旨
Introduction Controls Controls - This is a simplified representation of front panel. Image shown may be somewhat different from your TV. - This manual explains the features available on the DU-50PX10 series TVs. Front Panel Controls Front Panel Controls ON/OFF TV/VIDEO MENU VOL CH ON/OFF Button MENU Button CHANNEL (E, D) Buttons VOLUME (F,G) Buttons Remote Control Sensor TV/VIDEO Button Power Standby Indicator Illuminates red in standby mode, Illuminates green when the TV is turned on. Owner’s
ページ8に含まれる内容の要旨
Introduction Connection Options Connection Options Back Connection Panel Back Connection Panel S-VIDEO Input A/V 2 A connection available to provide better picture quality than the video input. VIDEO Input Connects the video signal from a video device. AUDIO Input Use to connect to hear stereo sound from an external device. S-Video Input DVI Input/Audio Input/RGB DVD/DTV Input (Component Connect S-Video out from an Input 1-2) S-VIDEO device to the S- Connect the monitor output con- Connect a com
ページ9に含まれる内容の要旨
TIMER POWER Installation Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. LIGHT MODE Illuminates the remote control buttons. Selects the remote operating mode: TV, VCR, DVD, CABLE, HDSTB or AUDIO. TV/VIDEO Select other operating modes, for the Selects: DTV, Analog, Video1-2, remote to operate external devices. Component 1-2, RGB-DTV (or RGB-PC), POWER DVI-DTV (or DVI-PC) input sources. MODE Turns your TV or
ページ10に含まれる内容の要旨
TIME R POWER Installation Installation Installation Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. 1.5V Batteries Owner’s Manual 75Ω Round Cable Power Cord MODE COMP/RGB/DVI FLASHBK MUTE SURF VOL CH SAP RATIO INFO CC OK MENU EXIT SOUND VIDEO PLAY PAUSE STOP RECORD REW FF SKIP PIP PIPCH- PIPCH+ PIPINPUT FREEZE ZOOM SIGNAL SWAP ADJUST 2-TV brackets 2-TV bracket bolts(42”) 2-Wall br
ページ11に含まれる内容の要旨
Installation Installation Instructions Installation Instructions • The TV can be installed in various ways such as on a wall, or on a desktop etc. • The TV is designed to be mounted horizontally. The speakers shown are optional. GROUNDING Power Supply Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the Short-circuit unit by connecting
ページ12に含まれる内容の要旨
Installation External Equipment Connections External Equipment Connections Antenna Connection Antenna Connection Analog and Digital TV signals provided on one antenna - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket Copper Wire RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten. UHF Antenna Copper Wire Outdoor Antenna Be
ページ13に含まれる内容の要旨
Installation NOTE: All cables shown are not included with the TV VCR Setup VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV - Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. Connection Option 1 Set VCR output swi
ページ14に含まれる内容の要旨
Installation External A/V Source Setup External A/V Source Setup How to connect Connect the audio and video cables from the external equip- ment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the MONITOR COMPONENT 2 DVD OUTPUT . DTV A/V COMPONENT 1 INPUT INPUT 1 (MONO) Antenna 1 Antenna 2 jack colors (Video = yellow, Audio Left = white, and Audio B INPUT RL R L Analog/DTV DTV AUDIO VIDEO S-VIDEO DTV INPUT) AC INPUT VIDEO
ページ15に含まれる内容の要旨
Installation HDSTB Setup HDSTB Setup - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for DTV (480p,720p,1080i) mode. DIGITAL AUDIO (OPTICAL) MONITOR COMPONENT 2 DVD . OUTPUT DTV R INPUT A/V COMPONENT 1 INPUT 1 (MONO) Antenna 1 Ante
ページ16に含まれる内容の要旨
Installation PC Setup PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. The TV sends config- uration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol. - The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card. card, change the screen scanning rate for the graphic card accordingly. How to connect 1. To get the best picture quality, adjust the
ページ17に含まれる内容の要旨
Installation Operation Operation Screen Setup for PC mode Screen Setup for PC mode - Be sure to select the RGB-PC/RGB-DTV source before operation. (For RGB-DTV input source, Position and Reset are available.) - In DVI-PC and DVI-DTV input source, settings are not adjustable. - You can manually adjust picture position and minimize image shaking for the PC input source. Adjustment for screen Position, Clock, and Phase Adjustment for screen Position, Clock, and Phase 1. Press the ADJUST button an
ページ18に含まれる内容の要旨
Operation Turning the TV On Turning the TV On Turning on the TV just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the TV. At this moment, the TV is switched to standby mode. Press the TV/VIDEO, CH (D / E) button on the TV or press the POWER, TV/VIDEO, COMP/RGB/DVI, CH (+, -), Number (0 ~ 9) button on the remote control and then the TV will switch on. Turning on the TV (power cord is still connected) 1. If the TV was turned off with the ON/OFF button on
ページ19に含まれる内容の要旨
Operation Setup Menu Options Setup Menu Options EZ Scan (Channel Search) EZ Scan (Channel Search) - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes. EZ Scan ANT 1 ANT 2 ANT 1 ANT 2 ANT 1 ANT 2 ANT 1 ANT 2 SETUP Ch.Edit Air Cable Cable Air Air Cable VIDEO DTV Signal Select DTV cable band, Select antenna input, Select antenna input, Select antenna input, Select
ページ20に含まれる内容の要旨
Operation DTV Signal Strength DTV Signal Strength - Reveals how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. - Digital DTV Signals: May not be available in all areas, nor are broadcast on all programs. 1. Press the SIGNAL button. 2. View the on-screen signal strength monitor to see the quality of the signal being received. • You can also check the DTV Signa
