ページ1に含まれる内容の要旨
PLASMA MONITOR
MODELS: 71PY1M
OWNER’S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.
P/NO : 38289U0558C
ページ2に含まれる内容の要旨
Warning Warning Warning WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangl
ページ3に含まれる内容の要旨
Owner's Manual Safety Instructions Safety Instructions Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appa- ratus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety
ページ4に含まれる内容の要旨
Safety Instructions 12. Use only with the cart, stand, tripod, bracket, or table 15. CAUTION concerning the Power Cord : specified by the manufacturer, or sold with the apparatus. Most appliances recommend they be placed upon a dedi- When a cart is used, use caution when moving the cated circuit; that is, a single outlet circuit which powers only cart/apparatus combination to avoid injury from tip-over. that appliance and has no additional outlets or branch cir- cuits. Check the specification pa
ページ5に含まれる内容の要旨
Contents Contents Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2~4 Screen Menu Options Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . .28 Introduction Setting Picture Format . . . . . . . . . . . . . . . . . . .28 Features Of This TV . . . . . . . . . . . . . . . . . . . . . .6 Cinema Mode Setup . . . . . . . . . . . . . . . . . . . . .29 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Screen Position . . . . . . . . .
ページ6に含まれる内容の要旨
Introduction Introduction Introduction Features Of This Monitor Features Of This Monitor What is a Plasma Monitor ? If voltage is applied to gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At that instant, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. 160° - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the displ
ページ7に含まれる内容の要旨
Introduction Accessories Accessories Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. 1.5V Batteries Owner’s Manual Remote Control 2- ferrite cores D-sub 15 pin cable Power Cord (for the speaker cables) Use the ferrite core with the speaker cables The ferrite core given as a bundled accessory can be used to reduce the electromagnetic waves in the con- nection to the speakers. Wind t
ページ8に含まれる内容の要旨
Introduction Controls Controls - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your monitor. INDEX TruSurround XT Switches LED Display on or off. INPUT MENU VOL Remote Sub power Button Control E E, D D Buttons Sensor VOLUME (F F , G G) Buttons Power Indicator MENU Button Illuminates red in standby INPUT Button mode, Illuminates green when the monitor is turned on. INDEX TruSurround XT TruSurround XT TruSurround XT TruSurround XT T
ページ9に含まれる内容の要旨
Introduction Connection Options Connection Options OPTICAL - This picture shown below may be somewhat different from your monitor. DIGITAL AUDIO OUT VIDEO VIDEO (MONO AUDIO AUDIO ) S-VIDEO S-VIDEO VIDEO VIDEO AUDIO AUDIO VIDEO IN VIDEO IN COMPONENT COMPONENT IN IN VIDEO IN 3 VIDEO IN 3 VIDEO IN 4 VIDEO IN 4 REMOTE REMOTE HDMI/DVI IN HDMI/DVI IN RS-232C IN RS-232C IN RGB IN RGB IN CONTROL IN CONTROL IN 2 (CONTROL (CONTROL & SER & SERVICE) VICE) AUDIO (RGB/DVI) AUDIO (RG
ページ10に含まれる内容の要旨
DW POWER DASP Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the monitor. - Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again as necessary. LIGHT Illuminates the remote control buttons. MODE Selects the remote operating mode: MNT, VCR, DVD, CABLE, HDSTB or AUDIO. MODE POWER PIP Turns your monitor or any other programmed
ページ11に含まれる内容の要旨
DW POWER DASP Introduction APC Adjusts the factory preset picture according to the room. DASP To select the sound appropriate to your viewing program character: SRS TSXT, Flat, Music, Movie, Sports, or Off p.22 G G MODE MUTE PIP Switches the sound on or off. SLEEP Sets the Sleep Timer. VOLUME UP/DOWN Increases/decreases the sound level. CHANNEL UP/DOWN MUTE SLEEP Selects available channels. VOL CH Dosen’t work for monitor mode. WIN. POSITION SWAP WIN. SIZE THUMBSTICK (Up/Down/Left/Right/ENTER)
ページ12に含まれる内容の要旨
Installation Installation Installation • Ensure adequate ventilation by following the clearance recommendations. 4 inches 4 inches 4 inches 4 inches For proper ventilation, allow a clearance of 4inches on each side from the wall. Desktop Pedestal Installation Desktop Pedestal Installation • This picture shown below may be somewhat different from your monitor. Power Supply Short-circuit Breaker GROUNDING Ensure that you connect the grounding / earth wire to prevent possible electric shock. If gro
ページ13に含まれる内容の要旨
Installation External Equipment Connections External Equipment Connections NOTE: Not all cables shown are included with the plasma display. VCR Setup VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor. - Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed image may remain visible on the screen after
ページ14に含まれる内容の要旨
Installation Cable Cable TV Setup TV Setup - After subscribing to a cable monitor service from a local provider and installing a converter, you can watch cable TV program- ming. The monitor cannot display monitor programming unless a TV tuner device or cable TV converter box is connected to the Monitor. - For further information regarding cable monitor service, contact your local cable TV service provider(s). How to connect 1. Connect the audio and video cables from the Cable Box's output jacks
ページ15に含まれる内容の要旨
Installation DVD Setup DVD Setup HDMI IN HDMI IN RS-232C IN RS-232C IN ( ) (CONTROL & SERVICE) VIDEO AUDIO 2 VIDEO AUDIO S-VIDEO VIDEO IN COMPONENT IN HDMI IN RS-232C IN (MONO ) (MONO ) VIDEO VIDEO AUDIO AUDIO 2 (CONTROL & SERVICE) 1(DVI) 1(DVI) VIDEO VIDEO AUDIO VIDEO VIDEO AUDIO AUDIO S-VIDEO S-VIDEO VIDEO VIDEO AUDIO AUDIO S-VIDEO S-VIDEO VIDEO IN VIDEO IN COMPONENT IN VIDEO IN VIDEO IN COMPONENT COMPONENT IN IN ( ) 1(DVI
ページ16に含まれる内容の要旨
Installation PC Setup PC Setup - This monitor provides Plug and Play capability, meaning that the PC adjusts automatically to its settings. The monitor sends configuration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol. - The monitor perceives 640x480, 60Hz as DTV 480p based on the PC graphic card. In this case, change the screen scanning rate for the graphic card. How to connect 1. To get the best picture quality, adjust
ページ17に含まれる内容の要旨
Installation Monitor Display Specifications (RGB-PC / HDMI/DVI-PC Mode) Horizontal Vertical Resolution Frequency(KHz) Frequency(Hz) 31.469 70.08 720x400 31.469 59.94 35.000 66.66 37.861 72.80 640x480 37.500 75.00 43.269 85.00 37.879 60.31 46.875 75.00 800x600 53.674 85.06 49.725 74.55 832x624 48.363 60.00 56.476 70.06 1024x768 60.023 75.02 63.981 60.02 1280x1024 80.000 75.00 1600x1200 75.00 60.00 1920x1080 66.587 59.934 TM - HDMI , the HDMI logo and High-Definition Multimedia How to connect Inte
ページ18に含まれる内容の要旨
Operation Operation Operation T Turning on the Monitor urning on the Monitor Turning on the Monitor just after installation 1. Connect power cord correctly. At this moment, the Monitor is switched to standby mode. 2. Press the INPUT or button on the Monitor or press the POWER, INPUT button on the remote control and then the Monitor will switch on. Menu Language Selection Menu Language Selection - The menus can be shown on the screen in the selected language. First select your language. 1. Press
ページ19に含まれる内容の要旨
Operation Picture Menu Options Picture Menu Options - Readjust Picture menu settings for each following input source as preferred. Auto Picture Control (APC) Auto Picture Control (APC) - APC adjusts the Monitor for the best picture appearance. - When adjusting Picture menu options (contrast, brightness, color, sharpness, and tint) manually, APC automati- cally changes to Off. 1. Press the APC button repeatedly to select the picture appearance setup option as shown below. Daylight Optimum Night t
ページ20に含まれる内容の要旨
Operation Picture Menu Options continued Picture Menu Options continued Fleshtone (Video1-2-3-4, Component 1-2, RGB-DTV, HDMI1/DVI-DTV, HDMI2-DTV Mode only) Fleshtone (Video1-2-3-4, Component 1-2, RGB-DTV, HDMI1/DVI-DTV, HDMI2-DTV Mode only) - Use Fleshtone to select the desired skin color option. APC APC ACC ACC 0 Fleshtone G G Fleshtone Contrast 100 Contrast 100 Brightness 55 Brightness 55 Color 55 Color 55 Sharpness 60 Sharpness 60 Tint 0 Tint 0 1. Press the MENU button and then use button
