ページ1に含まれる内容の要旨
32LC50C 32LX50C 37LC50CB
32LC50CB 32LX50CS 42LB50C
32LC50CS 37LC50DC 42LC50C
Integrated TVs
Setup & Operation Guide
for
Commercial Mode
Note: All features shown within this guide may not be
available on all models.
Experienced Installer
Master TV Setup
page 6
Cloning Information
pages 7-8-9
© Copyright 2008, LG Electronics U.S.A., Inc.
ページ2に含まれる内容の要旨
Installer Overview PTC INSTALLER MENU This is the commercial mode setup guide only. For all other information refer to the separately-supplied TV Owner’s Manual (Users guide). 000 INSTALLER SEQ 000 Operating Installer Menu UPN 000-000-000-000 FPGA E0F1 To set up the controls for the TV you will need to know how to enter PTC V1.00.000 CPU V3.06.00 the TV Installer menu and make changes to the default values as required. If necessary, familiarize yourself with the TV Installer menu and
ページ3に含まれる内容の要旨
Table of Contents Use this page as a reference to find pages or sections to go to and set up the TV features. Go to page 6 to begin the Commercial Mode Master TV setup. 1. Connect TV to RF signal source. 2. Customize TV features and set up other operational controls in the Installer’s menu. 3. Copy the Master TV setup into the clone programmer. 4. Transfer the Master TV setup from the clone programmer to identical TVs. Installer Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Typical Installer Multi-Brand Remote Control LG Multi-brand Remote Control INPUT MODE TV TV POWER INPUT DVD Use the MODE button to select TV and put installer remote into TV MULTI VCR operating mode. PIP PIP CH - PIP CH + PIP INPUT Notes: This remote is supplied with the TV. This typical LG multi-brand EZ PIC EZ SOUND SWAP INFO remote control is shown for reference. See next page for typical key functions in TV mode. CC RATIO MENU EXIT SAP Follow the instructions provided on page 10 to access
ページ5に含まれる内容の要旨
Installer Remote Control Typical Key Functions Remote Control Key Functions. To put remote into TV operating mode, select TV with the MODE key. Notes: This remote is supplied with the TV. This typical LG multi-brand remote control is shown for reference. Follow the instructions provided on the next page to access the Installer menus. TV INPUT/INPUT MODE Select available input sources. Selects remote operating mode: TV, VCR, or DVD. INPUT MODE Select these other operating modes, for remote TV TV
ページ6に含まれる内容の要旨
Commercial Mode Setup for Master TV This page provides an overview of the TV configuration. See the pages listed below for more specific, detailed instructions at each step; how to access and use the Installer menu etc. Note 1: Disconnect all Aux inputs. Under certain conditions, EZ Scan (Channel search) is disabled if there is an Aux input active. PTC INSTALLER MENU Overview: Commercial Mode Setup Procedure 1. Set Installer Menu Items (Enter Installer Menu, see page 10 for detailed instruct
ページ7に含まれる内容の要旨
Cloning Connections/Learning Setup Connections for the LT2002 Clone Programmer to Learn the TV Master TV Setup Antenna or CATV Ferrite Core (TDK, ZCAT Connect cable to TV MPI Jack and 2035-0930) follow on screen Status instructions Indicator MPI Reset Color • green battery ok • red battery low Blink pattern • slow power on no communications • heartbeat power on communications ok THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION XX THE TV IS VERSION XX THE SW IS REVISIO
ページ8に含まれる内容の要旨
Cloning Learning Setup Learning the Master TV Setup Instructions for the Clone Programmer to Learn the Master TV Setup THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION XX THE TV IS VERSION XX THE SW IS REVISION XX Use MPI Cable to Connect LT2002 Clone Programmer to CLONE CLOCK= XX:XX Master TV MPI Port TV CLOCK= XX:XX If there is a good connection, “THE CLONE HAS CONTROL OF TV” -PRESS ANY KEY TO CONTINUE. message will appear. Press any key on the Installer remote. -DISCONNECT CLONE WHEN
ページ9に含まれる内容の要旨
Cloning Connections/Teaching Setup Teaching the Master Setup to Another TV Connections for the LT2002 to Teach another TV the Master Setup Antenna Ferrite Core or CATV Connect cable to TV MPI Jack and (TDK, ZCAT follow on screen Status instructions Indicator 2035-0930) MPI Reset Color • green battery ok • red battery low Blink pattern • slow power on no communications • heartbeat power on communications ok THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION XX THE TV IS
ページ10に含まれる内容の要旨
Installer Menu Use the Installer’s Menu to set up or change operational settings. See more detailed descriptions of the Installer menu items on the following pages... Accessing the Installer’s Menu Make sure TV is on. Installer’s menu items can be accessed by using an installer’s remote PTC INSTALLER MENU control. Just press MENU repeatedly until the TV seems to stop responding, then press 9, 8, 7, 6, then ENTER to access the Installer’s menu. To remove the Installer’s menu, press ENTER again
ページ11に含まれる内容の要旨
Installer Menu Installer Menu Items 035 through 118 Menu Item Function Value Range Default Value Brief Description of Function and Comments 035 COMPPORT EN. 0 / 2 1 Set to 0 to disable HDMI 1. Set to 1 for DTV, set to 2 for PC. 038 YPrPb EN. 0 / 1 1 Set to 1 to enable display panel Component Video input jacks. 039 REAR AUX EN 0 / 1 1 Set to 1 to enable display panel Video 1 input jack. 040 AUTO CAMPORT 0 / 1 1 Set to 1 to automatically switch to Camport. 046 STRT AUX SRCE Note 1 255 Sets the sta
ページ12に含まれる内容の要旨
Installer Menu Generally, this feature is used in connection with START CHANNEL Detailed Descriptions of Installer Menu Items (Installer item 004) where the start channel may, for example, be set to 3 or 4. If the start channel is 3, then the TV will remain locked on 000 - INSTALLER SEQUENCE Channel 3. Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 NOTE: For Items 007, 008 and 009 For legacy reasons, the scale used is 0 - 63. The PTC software will 001 - P
ページ13に含まれる内容の要旨
Installer Menu 011 - KEY DEFEAT (Keyboard Defeat) 031 - POLL RATE If set to 1, key defeat prevents the end user from accessing the on- M.P.I. Communication Parameter. Selects Poll Rate for M.P.I. Leave at screen menus with the display front panel—MENU, SELECT, and Left / default setting unless changed by Pay-Per-View provider. Step size of Right arrow keys do not function. If set to 0, those keys do function. 16 ms. NOTE: The menus can always be accessed by pressing MENU on the remote. 032 - TIM
ページ14に含まれる内容の要旨
Installer Menu Detailed Descriptions of Installer Menu Items 047 - AUX STATUS 080 - UPN MSB-2 (UPN Most Significant Byte-2) Set to 1 for M.P.I. AUX source to be reported as a channel number User programmable number, most significant byte-2 readable by M.P.I. instead of channel 0. Set to 0 to disable AUX identification change. command. Not linked to serial number. Controls M.P.I. status channel response for AUX inputs. 081 - UPN LSB (UPN Least Significant Byte) 053 - DIS. CH-TIME (Disable Channe
ページ15に含まれる内容の要旨
Installer Menu 093 - RJP AVAILABLE (Remote Jack Pack Available) 099 - BACK LIGHTING 0 = Remote jack pack is not available or disabled. Sets the TV screen brightness at power up, see settings below. 1 = Series 100 RJP, HDMI Mode Default setting is 100 power saving mode is disabled. Enables RJP when an HDMI cable is inserted into RJP. Video is from 1 - 100 Static Backlighting. HDMI. Audio stream is expected from HDMI source. If no audio is pres- (1 = Dimmest picture, 100 = Brightest picture.)
ページ16に含まれる内容の要旨
Reference: Clonable Menu Features Clonable Menu Features Menu /Sub Menu Features Setup SET ID Lock Option Movie Rating Aspect Ratio Audio TV Rating – Children Age Caption Audio Language TV Rating – Children Fantasy Caption Mode EZ SoundRite Violence DTV Captions Style - Style EZ sound TV Rating – General Age DTV Captions Style - Size Balance TV Rating – General Dialogue DTV Captions Style - Font Treble TV Rating – General Language DTV Captions Style - Text Color Ba
ページ17に含まれる内容の要旨
Reference: Procedures for adding Channel Label Icons/Custom Channel Labels (2-5-4 + MENU Mode) Adding Channel Icons and Labels in the 2-5-4 + Menu Mode Editing and adding the labels can only be done if there are Editing/Adding Channel ICONs and/or Labels channels entered into the TV’s channel map either by using the If there is no pre-assigned ICON, you can make a custom chan- method described in item 6 (page 18), by cloning or by the use nel label of up to 7 characters to help in identifying t
ページ18に含まれる内容の要旨
Reference: Detailed Information For Making A Master TV IMPORTANT INSTALLER SETUP INFORMATION! PLEASE READ THE FOLLOWING... To set up a master TV you will need to know how to like adding channel icons or channel labels, digital font options enter the TV Installer menu and make changes to etc., are not correctly added, then the cloned TVs will all have the default values as required. If necessary, famil- problems. iarize yourself with the TV Installer menu and how to make and save changes in the
ページ19に含まれる内容の要旨
Reference: Checking Software Version Procedure for Checking Software Version The software version of the TV may be checked by accessing the INSTALLER MENU. To do this, press the MENU button repeatedly until the menu display ceases to respond to MENU key presses. Then, press "9", "8", "7", "6", "ENTER/SELECT". PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Typical Installer Menu PAGE 19 206-4071
ページ20に含まれる内容の要旨
TV Camport Auto Sense Operation The CAMPORT Auto Sense function is enabled when: CAMPORT (Front Video) Functionality Control 1. Installer Menu Item 34, CAMPORT EN is set to 1 AND 2. Installer Menu Item 40, AUTO CAMPORT is enabled (1). Item 34 Item 40 Front Video CAMPORT EN AUTO CAMPORT Operation Selectable= Can be accessed with INPUT key, direct access, etc. 0 0 Disabled Auto Sense= Switches to this input when connector is inserted. 0 1 Disabled The camport (Front Video) has the highest priority
