ページ1に含まれる内容の要旨
LT2452pwCFlat Panel Monitor
User's Guide
ページ2に含まれる内容の要旨
Product numbers 4420-MB2 First Edition (May 2011) © Copyright Lenovo 2011. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administ
ページ3に含まれる内容の要旨
Contents Safety information ...................................................................................................... iii Chapter 1. Getting started ....................................................................................... 1-1 Shipping contents ......................................................................................................................................................... 1-1 Product overview .....................................................
ページ4に含まれる内容の要旨
Safety information General Safety guidelines For tips to help you use your computer safety, go to: http://www.lenovo.com/safety © Copyright Lenovo 2011. iii
ページ5に含まれる内容の要旨
Chapter1.Gettingstarted ® This User’s Guide contains detailed information on the ThinkVision LT2452pwC Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: · Information flyer · Reference and Driver CD · ThinkVision LT2452pwC Flat Panel Monitor · Power Cord · Digital Cable - Attached to monitor · Analog Signal Cable · USB Cable · Cable Cover · Cable Wrapper Note: To
ページ6に含まれる内容の要旨
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle. o o -45 45 1-2 LT2452pwC Flat Panel Monitor User’s Guide
ページ7に含まれる内容の要旨
Height Adjustment After pressing the top of the monitor, remove the fixed pin and adjust the height of the monitor. 110mm Monitor Pivot O 90 - Adjust height to the top position before rotation the monitor. . - Rotate clockwise until the monitor stops at 90° User controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image” on page 2-3. Chapter 1. Getting started 1-3
ページ8に含まれる内容の要旨
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower left corner). Please follow the instructions that came with the cable lock to attach it. Setting up your monitor This section provides information to help you set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the information flyer before carrying out this procedure. 1. Power off your computer and all attached devices,
ページ9に含まれる内容の要旨
Connect the digital signal cable to the DVI connector of the monitor and the other end on the back of the computer. Connect one end of the DP cable to the DP connector on the back of the computer, and the other end to the DP connector on the monitor. DisplayPort* * This port does not support being connected to any AV equipment. Lenovo recommends that customers who require to use the Display Port input on their monitor purchase the "Lenovo Display Port to Display Port cable 0A36537".For more in
ページ10に含まれる内容の要旨
Connect one end of the USB hub cable to the USB connector on the back of the computer, and the other end to the upstream USB connector on the monitor. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord 2 according to IEC
ページ11に含まれる内容の要旨
Rotate the head of the monitor into portrait view. Chapter 1. Getting started 1-7
ページ12に含まれる内容の要旨
Place the cables through the Main Clip. Then fasten the clip. Wrap the Cable Wrapper around the cables. 1-8 LT2452pwC Flat Panel Monitor User’s Guide
ページ13に含まれる内容の要旨
Remove the Rubber Cover from the back of the stand. Replace the Cable Cover. Chapter 1. Getting started 1-9
ページ14に含まれる内容の要旨
Power on the monitor and the computer. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. To optimize your monitor image, if using the analog cable, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required if you are using the DVI cable. Note: If automatic image setup does not establish the image that you prefer, perform manual image
ページ15に含まれる内容の要旨
Registering your option ® Thank you for purchasing this Lenovo product. Please take a few moments to register your product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the followingWeb site: http://www.lenovo.com/register Lenovo will send you information and updates on your
ページ16に含まれる内容の要旨
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed informa
ページ17に含まれる内容の要旨
· Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture. · General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows. The following are some other tips for comfortable viewing of your monitor: · Use adequate lighting for the type of work you are performing. · Use the monitor brightness, contrast, and image adjustment controls, if equipped, to
ページ18に含まれる内容の要旨
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at: http://www.ibm.com/able/ Adjusting your monitor image This section describes the user control features used to adjust your monitor
ページ19に含まれる内容の要旨
To use the controls: 1. Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments. Press to save. 3. Press to move backwards through the sub-menus and exit from the OSD. 4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental adjustments to the OSD. Press and hold for 10 secon
ページ20に含まれる内容の要旨
Table 2-2. OSD functions OSD Icon Submenu Description Controls and Controls and on Main Adjustments Adjustments Menu (Analog) (Digital) Adjusts overall brightness Same as Brightness Analog Brightness- Adjusts difference between light and dark areas /Contrast Contrast Moves the image left or right. Controls Horizontal Position Image Locked not Position required for Moves the image up or down. Vertical Position digital input Automatically optimizes the image. Automatic Image Manually optimizes the
