ページ1に含まれる内容の要旨
LCD COLOR MONITOR
KVX-5
INSTRUCTION MANUAL
B60-5141-08 00␣ ␣ JA␣ ␣ (T) 0004
ページ2に含まれる内容の要旨
Safety Precautions Caution: Read this page carefully to ensure safe operation. WARNING:TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFEGUARDS Please read all of the safety and operating instructions before operating this unit. For best results, follow all warnings placed on the unit and adhere to the operating and use instruc- tions. These safety and operating instructions should be retained for future reference. 1. Power sources — The unit shou
ページ3に含まれる内容の要旨
Before Applying Power Caution: Read this page carefully to ensure safe operation. AC adaptors are designed for operation as follows. Europe and U.K. .................................................................. AC 230 V only Contents Caution: Read the pages marked carefully to ensure safe operation. Safety Precautions .......................................... 2 Before Applying Power .................................. 3 Introduction .......................................................
ページ4に含まれる内容の要旨
Introduction Keep the packing case for later usage, e.g., protection of your system in transportation for repair services and so on. Checking the Accessories Check the accessories as specified below: AC adaptor (1 set) AV cable (1 piece) Cushion (2 pieces) Using the Stand You can incline your system using the stand on the rear when looking at the screen. Slowly pull out the stand until it stops. Note: When pulling the stand out, do not apply an excessive force to it. A strong force can cause sta
ページ5に含まれる内容の要旨
Connections Connecting the Power Supply (AC adaptor) Plug the AC adaptor into the AC outlet. POWER OFF ON PHONES AV1 IN AV2 IN AC Adaptor To DC IN Terminal DC IN Note: Be sure the POWER switch is set to the OFF position before you connect the AC adaptor. Connecting the AC adaptor with the POWER switch set to the ON position may cause a trouble in the system. Connecting AV Equipment This system is equipped with the two AV input terminals: AV1 IN and AV2 IN. Use the AV cable supplied with your sys
ページ6に含まれる内容の要旨
Name and Function of Parts 1 POWER switch Turns on or off the power of the system. POWER OFF ON 2 PHONES terminal Connects headphones. (Page 10) • No sound will be emitted from the speaker. 3 AV1 IN terminal Inputs audio/video signals from external AV equipment. (Page 5) PHONES 4 AV2 IN terminal Inputs audio/video signals from external AV AV1 IN equipment. (Page 5) AV2 IN 5 DC IN terminal Connects the AC adaptor. (Page 5) 6 MENU button DC IN Displays menu on the screen, allowing you TFT ACTIVE M
ページ7に含まれる内容の要旨
Setting the Menu Pressing the MENU button displays the following menu on the screen. Menu item Set contents Displays AV input, AV1 AV1 or AV2 currently being selected. MODE AUTO PAL NTSC COLOR 50 50 TINT 50 PICTURE Note: The contents set up just before the power was turned off appears on the screen. The screen above is an image that appears when you purchased the system. Selecting Menu Items The arrow (3) shows a menu item currently being selected. Each time you press the MENU button, you can se
ページ8に含まれる内容の要旨
Setting the Menu (Continued) Selecting the Color System (MODE) You can select one of the following modes for the Color system. AUTO: Automatically selects PAL or NTSC according to the video signal received. PAL: Sets PAL for the Color system. NTSC: Sets NTSC for the Color system. 1 Press the MENU button to select “MODE”. 2 Press the MENU SET 5/° button to select the Color system. Each time you press the button, the setting changes as follows: MODE AUTO PAL NTSC MODE AUTO PAL NTSC MODE AUTO PAL N
ページ9に含まれる内容の要旨
Selecting AV Input Select either one of the two AV inputs by using the AV1 or AV2 button. Turning on the power selects the AV input selected just before the power was turned off. • Pressing the AV1 button displays “AV1” at the upper right portion of the screen for several seconds, receiving AV signals from AV AV1 equipment connected to the AV1 terminal. • Pressing the AV2 button displays “AV2” at the upper right portion INPUT of the screen for several seconds, receiving AV signals from AV equipm
ページ10に含まれる内容の要旨
Adjusting the Brightness of the Screen Press the BRIGHT 5/° button to adjust the brightness of the screen. Up An numerical adjustment value (0~100) is displayed on the screen dur- ing adjustment. BRIGHT Note: The brightness of the screen differs depending on the angle at Down which you see the liquid crystal panel. So, adjust the brightness of the screen after setting the watching angle. Listening to Sounds with Headphones You can listen to sounds with monaural headphones plugged into the system
ページ11に含まれる内容の要旨
Troubleshooting Problems If the system does not work as you expect, perform the following checks before contacting Customer Support. Action to be taken Problem No image and no sound • Check the AC adaptor for proper connection. • Check that the POWER switch is turned on. • Check that the brightness and volume are minimized or the system is put in mute state. No image and no sound (“NO • Check the selected AV input (AV1 or AV2) for SIGNAL” appears) connection to AV equipment. • Check for receptio
ページ12に含まれる内容の要旨
Specifications Model Designation 5.6-inch LCD Color Monitor KVX-5 Maximum external Width: 180 mm (7-1/16") dimensions Height: 136 mm (5-3/8") Depth: 55 mm (2-3/16") Weight (net) 620 g (1.4 lb) AC adaptor DC 12 V Liquid Crystal Panel High-resolution 5.6-inch color LCD Driving System TFT active matrix system Light Source Backlight: High intensity fluorescent tube Color System PAL/NTSC Speaker 3.5-cm round type speaker with 500 mW output • These ratings and the design are subject to change without
