ページ1に含まれる内容の要旨
OWNER’S MANUAL
GUIDE D’UTILISATION
19” WIDE TFT LCD TELEVISION WITH DIGITAL TUNER
TÉLÉVISEUR GRAND ÉCRAN ACL TFT DE 19 po AVEC
SYNTONISEUR NUMÉRIQUE
(19” class/18.50 diagonal)
LT-19A210
(19” classe/18,50 diagonale)
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez
ページ2に含まれる内容の要旨
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is intended to SHOCK, DO NOT REMOVE COVER alert the user to the presence of (OR BACK). NO USER-SERVICEABLE important operating
ページ3に含まれる内容の要旨
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fa
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 22) When you connect th
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the unit is exposed to
ページ6に含まれる内容の要旨
How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its back onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fi t in only one direction. Hold the unit and attach the stand slowly. Please assure “ ” mark on the stand is facing t
ページ7に含まれる内容の要旨
Features • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS. • Programmable TV Sleep Timer - Operable from the remote control, the LCD TV can be progra
ページ8に含まれる内容の要旨
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 How to attach the stand ....................................6 How to remove the stand ..................................6 F eatures ............................................................ 7 Power source ....................................................7 Contents ...........................................................8 Parts and functions ..................
ページ9に含まれる内容の要旨
Parts and functions Front Right side VOLUME +/– buttons CHANNEL / buttons MENU button INPUT/ENTER button POWER button To display the menu screen. Remote sensor Press MENU button to display the menu screen. CHANNEL / buttons, VOLUME POWER indicator +/– buttons and INPUT/ENTER button Red: Standby can be used to select the desired setting Green: On Rear during the menu screen operations. HDMI IN jack DIGITAL AUDIO COAXIAL OUT jack RF (ANT.) IN jack PC MONITOR IN jack HEADPHONE jack AC INPUT j
ページ10に含まれる内容の要旨
Remote control 7.RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions. 1 To use this function, select “Picture” or “Audio” in the menu screen, then press this button. 8.INPUT SELECT Button - Use to change the 2 external input. 9.SCREEN SIZE Button - Used to change the picture size. 3 10 10.RECALL Button - This button allows you to go back to the previous channel selected by just 4 11 pressing the RECALL button. Press this button 12 again to ret
ページ11に含まれる内容の要旨
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 12 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack. Antenna Antenna Jack Jack If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matchin
ページ12に含まれる内容の要旨
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company. For subscribers to basic Cable TV service For basic Cable TV service not requiring a Converter/ Descrambler box, connect the 75 ohm Coaxial Cable
ページ13に含まれる内容の要旨
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the LCD TV to a VCR Rear of the unit VCR To VIDEO/AUDIO IN To Video/Audio OUT Video/Audio cord (not supplied) To connect the LCD TV to a VCR with a S-Video cord If you connect a VCR with a S-Vid
ページ14に含まれる内容の要旨
Connections to other equipment (continued) Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below. Rear of the unit Front Speaker Subwoofer (Right) TV Front Speaker (Left) Coaxial Digital Audio Output Coaxial digital cable (not supplied)
ページ15に含まれる内容の要旨
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required. Rear of the unit To HDMI out HDMI device or To HDMI IN DVI device HDMI cable (type A connector) (not supplied) To DVI output HDMI - to - DVI ad
ページ16に含まれる内容の要旨
TO SELECT ANALOG CHANNELS Starting setup 1-9: Press 1-9 as needed. Example, to select channel 2, press 2, then press The Starting Setup menu appears the first time ENTER. you turn on the TV, and assists you to specify the 10-99: Press the 2 digits in order. Example, Air/Cable setting, and program your channels to select channel 12, press 1, 2, then automatically. press ENTER. 100-135: Press the 3 digits in order. Example, to IMPORTANT: Make sure that the antenna or cable select channel
ページ17に含まれる内容の要旨
Quick guide for menu DISPLAY Press DISPLAY to display the current information on operation the screen. When the TV receives a digital signal, the digital Call menu and for example: Select Language. information will appear. Press INPUT SELECT to select TV mode. Sleep Timer 1 62-1 HDTV Moving Picture1 Off CH-1 X Digital Air English No Program Information is available 2 Press MENU. The TV menu screen will appear. Main Menu >> Picture Full Audio 1080i Channel Lock Setup • Channel number
ページ18に含まれる内容の要旨
Convenience functions You can change the default settings by pressing the Menu button on your remote, then select the one of the icons at the top of the menu - follow the On-Screen prompts to set your preferences. Icon Selected Items Setup hint Picture Picture Brightness / You can adjust the picture quality to your preference. Setting Contrast / Sharpness / Color / Tint Color Bluish (Cool) / Neutral (Standard) / Reddish (Warm) Temperature Backlight The Backlight feature adjusts the screen b
ページ19に含まれる内容の要旨
The TV will begin memorizing all the channels Memorizing channels 4 available in your area. • It may take from 15 minutes to 30 minutes to This TV is equipped with a channel memory complete memorizing digital cable channels. feature which allows channels to skip up or down Depending on the reception condition, a bar to the next channel set into memory, skipping display may not advance for several minutes, over unwanted channels. Before selecting please be patient. channels, they must be
ページ20に含まれる内容の要旨
Ch Label Clear All Channel Number 15-1 Ch Label All channels are deleted from the channel memory. Label Clear >> Select “Channel”, then press or ENTER. 1 : Select : Adjust Press or to select “Add/Delete”, then press 2 or ENTER. 4 Press or repeatedly until the character you want appears in the first space. Press or to select “Clear All”, then press 3 or ENTER. Ch Label Channel Number 15-1 Add/Delete Ch Label A Adding Channel >> Label Clear >> Add/Delete >> Clear All >> : Select : Adju
