ページ1に含まれる内容の要旨
20”LCD TV| Téléviseur ACL de 20 po | Televisor con Pantalla LCD de 20"
NS-20WLCD
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Ventilation Insignia NS-20WLCD Slots and openings in the cabinet and the back or bottom are provided for ventilation, reliable operation, and protection from overheating. 20” LCD TV These openings must not be blocked or covered. Do not block the openings by placing your TV on a bed, sofa, rug, or other similar surface. Do not place your TV near or over a radiator or heat Contents register. Do not place your TV in a built-in installation, such as a bookcase or rack, unless Safety inform
ページ4に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV Replacement parts Screen protection When replacement parts are required, make Your TV’s screen is made of glass. Do not drop sure that the service technician uses your TV or hit the glass screen. If the screen replacement parts specified by the manufacturer breaks, be careful of broken glass. that have the same characteristics as the Pixel defect original part. Unauthorized substitutions may Your TV’s screen is designed to display finely result in fire, electri
ページ5に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV Jack Description Features 2 D-Sub Plug a computer video cable Front into this jack. 3 Component left audio If you are using a component video connection, plug the left audio cable into this jack. 4 Component right If you are using a component audio video connection, plug the right audio cable into this jack 5 Component video If you are using a component Pr/Cr video connection, plug the Pr/Cr connector on a component video cable into this jack. 6 Component v
ページ6に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV Using the remote control Remote control To use the remote control: 8 1 � Point the remote control towards the remote sensor on the front of your TV. Note 9 2 The location of the remote sensor may vary. The following illustration shows the remote control range. 3 4 10 11 5 12 6 13 ZOOM 7 14 16.4 ft (5 M) Button Description 1 Display Press to display information, such as channel number, audio mode, or signal source. 2 Press to turn your TV on or Power Notes off.
ページ7に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV 3 Replace the cover. Installing remote control batteries To install the remote control batteries: 1 Remove the battery cover. Notes � Do not mix batteries of different types. � Do not mix old and new batteries. 2 Insert two AAA batteries into the battery � Remove batteries when the charge is depleted. compartment. Make sure that you match the � Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals + an
ページ8に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV If your antenna cable has a 300 ohm connector, To connect cable TV with a connect the cable to a 300-75 ohm adapter (not converter/descrambler box: included), connect the adapter to a 75 ohm � Use the following illustration to connect a cable, then connect the other end of the 75 ohm converter/descrambler box. (The RF switch connector to the RF jack on the back of your TV. and the signal splitter are not provided.) Set the RF switch to the A position to watch
ページ9に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV Connecting a camcorder Connecting a DVD player using component video Warning Make sure that you turn off and unplug your TV before Warning installing devices. Make sure that you turn off and unplug your TV before installing devices. Use the following illustration to connect a camcorder to your TV. To connect a DVD player using component video: To connect a camcorder: 1 Plug the Y, Pb, and Pr connectors on a 1 Plug the audio/video cable into the AUDIO L, compo
ページ10に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV 4 Press the CH+ or CH– button to select Input. Connecting a PC To connect a PC: 1 Plug a D-Sub cable into the D-Sub IN jack on the back of your TV. Audio D-Sub 5 Press the ENTER, VOL+, or VOL– button to select Antenna or Cable. Setting up the channel list To set up the channel list: 1 Press the MENU button to open the on-screen display (OSD). 2 Plug the other end of the D-Sub cable into the D-Sub OUT jack on the computer. 2 Press the CH+ or CH– button one or mor
ページ11に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV 5 Press the CH+ or CH– one or more times to 3 Press the ENTER, VOL+, or VOL– button to select Channel Skip. open the Channel menu. 6 Press the ENTER, VOL+, or VOL– button to 4 Press the CH+ or CH– button one or more select On or Off. times to select Fine Tune. If you select On, the channel is erased from the list. If you select Off, the channel is added to the list. When you erase a channel, you cannot tune to the channel with the CH+ or CH– buttons. You can t
ページ12に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV 3 Press the ENTER, VOL+, or VOL– button to 4 Press the VOL+ or VOL– button one or more open the Display menu. Language is time to adjust the option. highlighted. If you are in TV or Video mode, you can adjust the following options: � Brightness–Adjusts the screen brightness. � Contrast–Adjusts the screen contrast. � Color–Adjusts the color saturation. � Tint–Adjusts the image tint. � Sharpness–Adjusts the sharpness. If you are in D-Sub mode, you can adjust the 4
ページ13に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV Adjusting the clock and phase 3 Press the ENTER, VOL+, or VOL– button to open the Sound menu. Adjust the clock frequency if the display image shimmers or has rainbow-like noise. Adjust the phase setting if the display image is blurry. To adjust the clock and phase: 1 Press the MENU button to open the OSD. 2 Press the CH+ or CH– button one or more times to select Image. 3 Press the ENTER, VOL+, or VOL– button to 4 Press the CH+ or CH– button one or more open th
ページ14に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV 4 Press the CH+ or CH– button one or more Adjusting the menu transparency times to select DCDi. To adjust the menu transparency: 1 Press the MENU button to open the OSD. 2 Press the CH+ or CH– button to select Display. 3 Press the ENTER, VOL+, or VOL– button to open the Display menu. 5 Press the ENTER, VOL+, or VOL– button to select On or Off. Setting the zoom (aspect ratio) mode The Zoom option lets you select the aspect ratio so the image is displayed full-sc
ページ15に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV 4 Press the CH+ or CH– button one or more Setting the sleep timer times to select CC MODE. To set the sleep timer: � Press the SLEEP button one or more times to select the amount of time you want your TV to wait before it turns off. � To cancel the sleep timer, press the SLEEP button one or more times until Off appears. Viewing closed captions 5 Press the ENTER, VOL+, or VOL– button to Your TV can display the closed captions that are select On, Only Mute, or
ページ16に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV 3 Press the ENTER, VOL+, or VOL– button to TV ratings (U.S.) open the Password Controls menu. TV ratings are age and content based. Some of the age ratings let you also specifiy types of content within these ratings that you want to block. Age Description rating TV-Y All children. TV-Y7 Children seven years of age or older. 4 Use the number buttons to enter your TV-G General audience. password. The default password is 1111. TV-PG Parental guidance suggested. 5
ページ17に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV 5 Press the ENTER, VOL+, or VOL– button to 3 Press the ENTER, VOL+, or VOL– button to open the Parental Controls menu. open the Password Controls menu. 6 Press the CH+ or CH– button one or more 4 Use the number buttons to enter your times to select TV Rating. password. The default password is 1111. 7 Press the ENTER, VOL+, or VOL– button 5 Press the ENTER, VOL+, or VOL– button to open the TV Rating menu. open the Parental Controls menu. 8 Press the CH+ or CH– but
ページ18に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV To set parental controls for Canadian 4 Use the number buttons to enter your old French: password. The default password is 1111. 1 Press the MENU button to open the OSD. 5 Press the ENTER, VOL+, or VOL– button to open the Parental Controls menu. 2 Press the CH+ or CH– button one or more times to select Parental Controls. 3 Press the ENTER, VOL+, or VOL– button to open the Password Controls menu. 6 Press the CH+ or CH– button one or more times to select Change P
ページ19に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV Clearing parental control settings Cleaning your TV Clean the screen and cabinet with a soft, To clear parental control settings: lint-free cloth. If the screen or cabinet is 1 From the Parental Controls menu, press the especially dirty, moisten a soft, lint-free cloth in a CH+ or CH– button one or more times to weak detergent solution, squeeze the excess select Clear All. moisture from the cloth, then wipe the screen or cabinet with the cloth. Use a clean cl
ページ20に含まれる内容の要旨
Insignia NS-20WLCD 20” LCD TV Symptom Possible solution Troubleshooting D-Sub picture is not � Make sure that you have General guidelines stable or synchronized selected the correct D-Sub mode on your computer. � If you use your TV in a location with a low temperature, the picture may leave trails or No output from one of � Adjust the balance in the Sound appear slightly delayed. After your TV warms the speakers menu. up, it will operate normally. Control buttons do not � Unplug the power
