ページ1に含まれる内容の要旨
L32A104
L LCD HD CD HDTV TV
IMPORTANT SAFETY INSTRUCTIONS ........................................................................ 2-6
FIRST TIME USE ......................................................................................................... 9-13
CONNECTIONS TO OTHER EQUIPMENT ............................................................... 14-16
TV OPERATION ........................................................................................................ 17-25
TROUBLESHOOTIN
ページ2に含まれる内容の要旨
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. C AUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is intended SHOCK, DO NOT REMOVE COVER to alert the user to the presence of important operating (OR BACK). NO USER-SERVICEABLE and
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the po
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS (continued) 24) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire. 25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 26) The
ページ5に含まれる内容の要旨
CHILD SAFETY NOTICE 5 39T1821A_EnSp.indb 5 39T1821A_EnSp.indb 5 1 11/24/10 5:51:05 PM 1/24/10 5:51:05 PM ENGLISH
ページ6に含まれる内容の要旨
SAFETY PRECAUTIONS The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunlight. When placing on a shelf leave 4 inches (10 cm) free space around the entire unit. 4 inches 4 inches Notes when mounting the LCD TV on a wall If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV for advice, and have the equipment pr
ページ7に含まれる内容の要旨
How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its front onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fit in only one direction. Hold the unit and attach the stand slowly, as shown in Figure 1. Figure 1 Figure 2 F
ページ8に含まれる内容の要旨
Features LCD color TV Unique space saving design combines a 32” class LCD color TV. Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS. Programmable TV Sleep
ページ9に含まれる内容の要旨
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ............................3 CHILD SAFETY NOTICE ...................................................5 SAFETY PRECAUTIONS ..................................................6 How to attach the stand .....................................................7 How to remove the stand ...................................................7 F eatures ............................................................................. 8 Power source ...
ページ10に含まれる内容の要旨
Location of controls Front Left side VOLUME +/– buttons CHANNEL / buttons MENU button INPUT/ENTER button POWER button To display the menu screen. Remote sensor Press MENU button to display the menu screen. POWER indicator CHANNEL / buttons, VOLUME Red: Standby +/– buttons and INPUT/ENTER button Green: On can be used to select the desired setting during the menu screen operations. Rear PC MONITOR IN jack VAR (VARIABLE) AUDIO OUT jacks DIGITAL AUDIO COAXIAL OUT jack RF (ANT.) IN jack HDMI2 IN
ページ11に含まれる内容の要旨
Remote control 5.MENU Button - Press to display the On-Screen menu. 12 6.CURSOR ▲/ ▼/ ◀/ ▶ Buttons - Use to navigate and select menu 1 13 2 functions of the LCD TV. 7.ENTER Button - Press to enter or select functions for the On- Screen menu. 3 8.EXIT Button - Press to exit the On-screen menu. 9.VOL (VOLUME) + / – Buttons - Press the + button to 4 14 increase, or the – button to decrease the sound level. 15 5 10.LAST CH Button - Pressing this button allow you to go back to the previous channel
ページ12に含まれる内容の要旨
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 13 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the Antenna Jack. Antenna Antenna Jack Jack If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching
ページ13に含まれる内容の要旨
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company. For subscribers to basic Cable TV service For basic Cable TV service not requiring a Converter/Descrambler box, connect the 75 ohm Coaxial Cable
ページ14に含まれる内容の要旨
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the LCD TV to a VCR Rear of the unit To LINE1 To Video/Audio OUT VIDEO/AUDIO IN VCR Video/Audio cord (not supplied) To connect the LCD TV to a VCR with an S-Video cord If you connect a VCR with
ページ15に含まれる内容の要旨
Connections to other equipment (continued) Using an AV Amplifier with built-in digital surround If you are using an AV amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below. Rear of the unit Front Speaker Subwoofer (Right) TV Front Speaker (Left) To DIGITAL AUDIO COAXIAL OUT Coaxial digital cable (not supplie
ページ16に含まれる内容の要旨
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI1/DVI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required. Rear of the unit To HDMI out HDMI device or To HDMI1/DVI IN To PC/DVI DVI device AUDIO IN HDMI cable (type A connector) (not supplied) To
ページ17に含まれる内容の要旨
TO SELECT DIGITAL CHANNELS Starting setup Press the first 1-3 digits, then press the – button followed by the remaining number. The Auto Setup menu appears the first time you turn on Example, to select channel 15-1, press 1, 5, –, 1, then press the TV. It will assist you to specify the Air/Cable setting and ENTER. program your channels automatically. • If a channel is selected with only audio content, “Audio only” will be displayed on the screen. IMPORTANT: Make sure that the antenna or cab
ページ18に含まれる内容の要旨
DISPLAY Quick guide for menu Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, the digital information will operation appear. Example: Select Menu Language. Sleep Timer 62-1 HDTV Moving Picture1 Off CH-1 TV-MA Digital Air English Press INPUT to select TV mode. 1 No Program Information is available Press MENU. The TV menu screen will appear. 2 Main Menu Video >> Full 1080i Audio Channel Locks • Channel number • Station name Setup • C
ページ19に含まれる内容の要旨
Convenience functions You can change the default settings by pressing the MENU button on your remote, then select one of the icons at the left of the menu - follow the On-Screen prompts to set your preferences. Icon Selected Items Setup hint Video Picture Brightness / Contrast You can adjust the picture quality to your preference. Setting / Sharpness / Color / Tint Color Temperature Bluish (Cool) / Neutral (Standard) / Reddish (Warm) Backlight The Backlight feature adjusts the screen brightne
ページ20に含まれる内容の要旨
Add Digital Channel Memorizing channels If you find a new unregistered digital channel, you can add the new channel into the channel memory. This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel Tune in the new channel. 1 set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s Select “Channel”, then press ▶ or ENTER. 2 memory. To use this TV with an antenna, set the Source op
