ページ1に含まれる内容の要旨
TFT-LCD TELEVISION
OWNER`S MANUAL
MODELS: L52A18-AK
L52A18-A
L47A18-AK
L42A18-AK
L37A18-AK
L32A18-AK
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
ページ2に含まれる内容の要旨
Congratulations on your purchase, and welcome to the "" family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier "" family, you`re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. thanks for investing in a Haier p
ページ3に含まれる内容の要旨
C CO ON NT TE EN NT T BEFORE OPERATING Warning..............................................................................................................1 Important Safety Instructions..............................................................................2 Buttons and interface location........................................................................... 4 Remote controller...............................................................................................6
ページ4に含まれる内容の要旨
Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. *If necessary, please contact authorized after-sales services. *A lighting flash mark in a triangle: A potentially hazardous situation, which, if not a
ページ5に含まれる内容の要旨
Important Safety Instructions The product should be tightly fixed to avoid To avoid fire hazards, do not use this drop damages and even fire. product under direct sunlight or closely to heat sources. Do not locate the product close to water Unplug the power supply and antenna of the product when there is a rainstorm, or oil, which may cause fire hazards. especially Thunderstorm. Do not use damaged or worn electric plugs Do not connect excessive sockets in parallel and keep electric cord
ページ6に含まれる内容の要旨
Important Safety Instructions 3
ページ7に含まれる内容の要旨
VIDEO L AUDIO R CARD Buttons and interface location - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Front panel Control Buttons and functions Card jack Side Printer jack USB1 jack USB2 jack VIDEO(AV2) L AUDIO TV/AV MENU P- P+ V- V+ R AUDIO 1. P-/+ : Channel number decrease/ increase 2. V-/+ : Volume decrease/increase,adjusting the menu 3. TV/AV button 4. MENU button 5. Remote Sensor 6. Power and Indicator Back cover Warning Please don`t
ページ8に含まれる内容の要旨
Buttons and interface location Rear panel Control HDMI Input Connnect a signal to HDMI/DVI VGA Input Connect the monitor output connector from a PC to the jack DVD/DTV Input (Component ) Connect a component video/audiodevice to these jacks. Av1 Input Connect audio/video out from an audio/video device to these jacks. S-Video Input Connect S-Video out from a S-Video device to these jacks. Antenna Input Connect cable or antenna signals to the TV, either directly or through your cable box. Earph
ページ9に含まれる内容の要旨
Remote controller Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 Precautions As strong light may interfere the Make sure that two AA alkaline batteries signals, change your position to are loaded. The batteries must be of the operate the remote controller if same type. The bat
ページ10に含まれる内容の要旨
Remote controller key function POWER Information display Turns your TV or any other Display of current channel programmed equipment on signals, program and systems or off, depending on mode. Picture still Nicam select button DISPLAY POWER MUTE Picture SIZE button Switches the sound on or off. I / I I MUTE STIL L P I C . S I Z E picture scale DVD mode S-Video mode S - V I D E O DVD/DTV PC/DVI T V / AV Select DVD mode select S-Video. PC/DVI mode TV/VIDEO Select PC/DVI mode. OK Q.VIEW OK button
ページ11に含まれる内容の要旨
External Equipment Connections - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. outdoor antenna (not supply) Antenna input 75 standard coaxial type ANT IN 75 coaxial cable 300 twin-lead cable Plug Antenna adapter (additional purchase) (not supply) Note * It is recommended that you'd better use 75 coaxial cable to remove the disturbance caused by airwave. * Don't bind antenna cable and electric wire together. T
ページ12に含まれる内容の要旨
External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR Connection - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Connection Option 1 Set VCR
ページ13に含まれる内容の要旨
External Equipment Connections DVD Setup How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on the TV and connect the DVD audio outputs to the AUDIO jacks on the TV, AV OUT as shown in the figure. 2. If your DVD only has an S-Video output jack, Y PbPr CbCr L AUDIO R VIDEO L AUDIO R S-VIDEO IN connect this to the S-VIDEO input on the TV IN AV1 IN and Connect the DVD audio outputs to the AV IN
ページ14に含まれる内容の要旨
External Equipment Connections PC Setup How to connect 1. Use the TV`s VGA IN port for video connections. 2. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required. How to use IN1 I N 2 1. Turn on the PC and the TV. Y PbCb PrCr L AUDIO R HDMI/DVI VIDEO 2. Turn on the display by pressing the POWER VGA IN IN button on the TV's remote control. 3. Use PC/DVI on the remote control to select VGA source. 4. Check the image on
ページ15に含まれる内容の要旨
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. ANT IN Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. Power source TO USE AC POWER SOURCE Use the AC po
ページ16に含まれる内容の要旨
Switching ON/OFF the TV set In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 Please press down the power switch to switch on AC power supply and the power indicator will light . 2 If the indicator is lighting in white, press POWER button on the remote control again. 3 If you want to exchange to standing by status, please press down POWER button on the remote controller
ページ17に含まれる内容の要旨
Searching Channel This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Automatic search 1 Press MENU button and then use VOL+/- button to select the Channel Edit >>> Tuning menu. Exchange >>> Note : 1.the Tuning menu will be only operated in normal Search Set >> > >> > Auto Search
ページ18に含まれる内容の要旨
Searching Channel Channel Edit 1 Press MENU button and then use VOL+/- button to Channel Edit >>> >>> Exchange select the Tuning menu. >> > Search Set >> > Auto Search 2 Press VOL+ button and then use CH+/- button to select Channel Edit item. Picture Sound Tuning Function Adjust Timer 3 Press VOL+ to enter the submenu. Channel No. 17 4 Press CH+/- button to select the item to adjust, and Channel Name --- Color System SE CA M press VOL+/- button to adjust the item to select. B/G
ページ19に含まれる内容の要旨
Searching Channel Channel Exchange 1 Press MENU button and then use VOL+/- button to select the Tuning menu. Channel Edit >>> Exchange >>> >> > Search Set >> > Auto search 2 Press VOL+ button and then use CH+/- button to select "Exchange" item. Picture Sound Tuning Function Adjust Timer 3 Press VOL+ to enter the submenu. 4 Press CH+/- button to select the To Channel item, Current Channel 17 and use VOL+/- button to set the desired channel To Channel 10 Exchange >> > number.
ページ20に含まれる内容の要旨
Watching TV Program You can watch TV program in a presetting channel. To select the TV mode Before watching TV program, you may ensure your TV in TV mode. Press TV/AV button to select TV mode. How to select the desired program 1 Using "Program number" buttons. Directly enter the channel number with the numeric keypad on the remote control. If to select channel numbers of double-digit or three-figure ,press continuously the numeric buttons in three second. 2 Using CH+/- button.
