ページ1に含まれる内容の要旨
LCD TV RECEIVER
USER'S MANUAL
MODEL:
L1509A-A, L1709A-A, L1910A-A,
Please read this manual carefully before
L2009A-A, L1911W-A
using your television and keep this manual
In a good place for future reference.
ページ2に含まれる内容の要旨
To users: Thank you for using our LCD-TV. Before connecting the LCD-TV and turning the power on, please read this book carefully. Please keep this book for later use. When it was loss of function by electrostatic shock, please switch the on/off button for restoring the function. CONTENT Safety Notice Items................................................................................... 1 Front Panel Controls..................................................................................
ページ3に含まれる内容の要旨
Safety Notice Items Incorrect usage will cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine. To insure your safety and extend the life-span of LCD-TV, please read the following items carefully before using: l Please read and understand all the instructions before operation; l Please keep the book for later use; l Please comply with the warning instructions on the machine and in this book strictly; l Please comply with
ページ4に含まれる内容の要旨
Front Panel Controls L1509A-A, L1709A-A, L1910A-A, L2009A-A 2 3 4 5 1 TV/AV MENU VOL- VOL+ CH- CH+ POWER L1911W-A 6 7 6 7 Control Panel Function 1. Power supply switch 2.TV/AV Select the input signals: COMPONENT/PC/AV/SV/TV 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter 5. CH- TV channe
ページ5に含まれる内容の要旨
Pr Pb Y R L V ANT IN PC AUDIO IN AUDIO IN VIDEO IN S-VIDEO COMPONENT IN VGA IN Connection Options The figure is just for reference, please see the real. And the AC power supply switch is on the back of the set) AV /S-VIDEO/COMPONENT Audio Input Connect audio output from an external device to this jack DVD/DTV Input Connect a component video/audio device to these jacks Earphone port Pr Pb Y R L V ANT IN PC AUDIO IN AUDIO IN VIDEO IN S-VIDEO
ページ6に含まれる内容の要旨
Remote Control Key Functions When using the remote control, aim it Buttons on the remote control towards the remote sensor on the TV Stand By MUTE Display current input signal information TV channel number select SLEEP DISPLAY MUTE POWER Set time to change the TV into the standby status after a period of preset NICAM PC AUTO AD TV/AV time.(time is 240/180/120/90/60/45/30/15/0) NICAM/A2 Stereo select EXIT Quick TV channel switch(return to the last channel) Volume down/up Left/right orientati
ページ7に含まれる内容の要旨
Remote Control Installing Batteries 1.Slide open the cover of the battery compartment on the back of the remote control. 2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 Precautions As strong light may interfere the Make sure that there is no signals, change your position to obstacle between the remote operate the remote controller if controller and television set. the television ca
ページ8に含まれる内容の要旨
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Mul
ページ9に含まれる内容の要旨
Connection Instructions PC Setup You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD VGA IN -TV and the PC are off; 3.Connect a D type 15-pin VGA interface cable ( not supplied ) to the VGA video interface connector on the PC. Then connect the other end to the VGA video i
ページ10に含まれる内容の要旨
Connection Instructions VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are off; Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Connection Option 2 1. Connect the audio and video cables from t
ページ11に含まれる内容の要旨
Connection Instructions Cable TV Setup - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 1. Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channe
ページ12に含まれる内容の要旨
Basic Operating Instructions Turn on the LCD-TV SLEEP DISPLAY M U TE P O W E R Switch on the power button on the back of the set and the TV N IC A M P C AUTO AD TV/AV will in standby mode. When the POWER button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER button, the PSM .S S M LCD-TVwill go into standby mode and the indicator light turns O K Q .V IE W re
ページ13に含まれる内容の要旨
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1.Press the relevant key on the remote control if you want to choose any channel from 0 to 9. for example: if you want to choose channel 8, just press the key number 0 and 8. Note: You must press 0 first and then the other
ページ14に含まれる内容の要旨
Menu Operations * In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to help you with the TV operation. Press TV/AV to select the input source, and the menu in the different source is different . 1. Press MENU button to display the main menu, and V+/V-to select the main menu . 2. Press P+/P- to scroll through the parameters 3. Press V+/V- buttons to make changes to the parameters 4. Press the OK button to exit the menu Picture
ページ15に含まれる内容の要旨
Menu Operations Picture Menu Options continued 2. Press P+/P- button to enter the picture menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Function: BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it will add more light to dark parts of the picture and by decreasin
ページ16に含まれる内容の要旨
Menu Operations Audio Menu Options continued You can adjust sound options to the levels you prefer. 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved .. Function : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from
ページ17に含まれる内容の要旨
Menu Operations Function Menu Options Menu Language Selection: The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU and V+/V- button until the following menu appears on the screen 2. Press P+/P- button to select LANGUAGE. 3. Press V+/V- button to select your desired language. From this point on, the on-screen menus will be shown in the language of your choice. FUNCTION INPUT SOURCE TV LANGUAGE
ページ18に含まれる内容の要旨
Menu Operations Function Menu Options Continued 2. TXT LANGUAGE: To switch the teletext languages. 3. TXT EAST/WEST: To select EAST or WEST . 4.BLUE SCREEN:To set On, the screen will be in blue screen after 3 seconds if there is no signal. 5. RESET : Press V+ to reset some settings to the factory default . Adjust Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen ADJUST AUTO SYNC. 50 PHASE 50 CLOCK 50 H POSITION V POSITION 50 Note: This menu is only
ページ19に含まれる内容の要旨
Menu Operations Tuning Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen TUNING CHANNEL 1 COLOR SYSTEM AUTO SOUND SYSTEM DK SKIP OFF AFC ON FINE TUNE EXCHANGE MANUAL SEARCH AUTO SEARCH Note: This menu is o
ページ20に含まれる内容の要旨
Menu Operations Tuning Menu Options Continued 7. EXCHANGE : Press V+ to display the menu as follows: EXCHANGE FROM : 1 TO : 9 EXCHANGE Press P+/- to select the item and then V+/- to adjust the channel and V+ to confirm.( For example: press P+/- to select FROM item, and then press V+/- to adjust the channel number to 1; then Press P+/- to select TO item, and V+/- to adjust the channel number to 9; press P+/- to select EXCHANGE ite
