ページ1に含まれる内容の要旨
17"LCDTV
TW1730
User’s Guide
ページ2に含まれる内容の要旨
Safety Instructions Warning! Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been incl
ページ3に含まれる内容の要旨
Safety Instructions Important Safety Information Always be careful when using your LCD TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. • Read all safety and operating instructions before operating your LCD TV. • Keep the safety and operating instructions for future reference. • Heed all warnings on the LCD TV and in the operating instructions. • Follow all operating and use instruct
ページ4に含まれる内容の要旨
Safety Instructions Important Safety Information •Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna system, be extremely careful to keep from touching the power lines or circuits. Contact with such lines can be fatal. • Do not overload the wall outlet or extension cords. Overloading can result in fire
ページ5に含まれる内容の要旨
Safety Instructions FCC Information User Instructions Warning The Federal Communications Commission Radio User must use shielded signal interface cables to maintain Frequency Interference Statement includes the following FCC compliance for the product. warning: Provided with this monitor is a detachable power supply NOTE: This equipment has been tested and found to cord with IEC320 style terminations. It may be suitable comply with the limits for a Class B digital device, for connection to any U
ページ6に含まれる内容の要旨
Contents Contents Warning! Important Safety Instructions ....................................................... 2 Important Safety Information ....................................................................... 3 FCC Information .......................................................................................... 5 Using the Display Ergonomically................................................................. 7 Using an LCD Mounting Arm.................................................
ページ7に含まれる内容の要旨
Using the Display Ergonomically ● When Using as a Computer Display • Adjust the LCD screen so that it faces slightly downward from your eyes, and maintain a distance of at least 15 inches from your eyes to the panel. • Adjust the illumination as well as the brightness and contrast of the LCD screen so that light reflection is minimized (300~1000 lux illumination is comfortable for your eyes). • Recommended computer use time is 6 hours per day or less. Also, taking a break of 10~15 minutes per ho
ページ8に含まれる内容の要旨
Using an LCD Mounting Arm Mounting Arm Requirements You can use a variety of wall mount arms with your LCD TV. However, they must meet the following require- ments: ● Must comply with VESA Mount Interface 75mm standard. ● Must be able to sustain the weight of the LCD TV. ● Refer to the installation manual supplied with the arm for proper setup. Mounting Arm Installation 1. Remove all cables connected to the LCD TV. 2. Lay the LCD TV face down on a flat surface with a cushion or some type of soft
ページ9に含まれる内容の要旨
Care and Maintenance Maintenance of the Exterior Cabinet ● Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. ● Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They may leave marks on the surfac
ページ10に含まれる内容の要旨
Before Using the TV LCD TV Overview Front View 1 MENU : Brings up the on-screen menu. 2 VOLUME : Increases or decreases the volume. Also use to select the “Return/Menu” item in the on- screen menu. 3 Standby Light : Lights when unit is in Standby mode. 4 Remote Control Sensor : Point the remote here to control the TV. 5 CHANNEL : Changes channels. Also use to “Move/Adjust” items in the on-screen menu. 6 TV/VIDEO : Selects an external device connected to the TV. 7 POWER : Turns on the TV. List
ページ11に含まれる内容の要旨
Before Using the TV Rear Panel Jacks 1 POWER INPUT CONNECTOR: Connect ONLY to the AC adapter supplied with this product. 2 PC VIDEO INPUT JACK: Connect to a PC monitor output. 3 PC AUDIO INPUT JACK: Connect to a PC audio output. 4 COMPONENT/HD VIDEO (Y, Pb, Pr) INPUT JACKS: Connect to a DVD player or a DTV receiver. 5 COMPONENT/HD AUDIO INPUT JACKS: Connect to a DVD player or a DTV receiver. 6 PHONES JACK: Connect to headphones. When you are listening with headphones, the sound from the speake
ページ12に含まれる内容の要旨
Before Using the TV Remote Control 1 POWER: Turns the TV on and off. 2 MUTE: Temporarily mutes the sound. 3 LINE: Displays the Composite or S-Video Input. 4 PC: Displays the PC Input. 5 COMPONENT: Displays the Component Video Input. 6 NUMBER BUTTONS : Selects channels directly on the TV. 7 100: Selects channels 100 or higher. For example, to select channel 121, press “100,” then press “2”, “1.” 8 LAST CH.: Moves to the previous channel. 9 MENU: Displays the OSD menu. 10 VIDEO: Configures vari
ページ13に含まれる内容の要旨
Before Using the TV Installing Batteries in the Remote Control Slide off the cover in the Install two AAA size Close the cover in the direction of the arrow. batteries according direction of the arrow. to the correct polarity. Using the Remote Control The remote control works properly in the following range: 20~30 feet from the TV, 10 feet to the left or right of the TV, and within 30 degrees from the remote control sensor of the TV. The remote control does not work properly! Check! Are the pola
ページ14に含まれる内容の要旨
Before Using the TV Connecting the TV Antenna If you do not have a cable system, you will need to connect an antenna to your TV. Connection Procedures Antenna Cable Connect the TV antenna cable... ...to the ANTENNA INPUT jack on the back panel of the TV. 14
ページ15に含まれる内容の要旨
Connections Connecting a VCR or DVD Player Connecting the Video/S-Video and Audio Jack Do not connect the Video cable and the S-Video cable at the same time. You should connect only one cable at a time. Connection Procedures LINE INPUT PHONES S-VIDEO VIDEO L - AUDIO - R Video Cable or Audio Cable S-Video Cable VCR or DVD Player To TV ANT S-VIDEO VIDEO L - AUDIO - R Connect the antenna cable to the ANTENNA IN terminal on the back of your VCR. Connect the VIDEO/AUDIO INPUT jack of the TV and the v
ページ16に含まれる内容の要旨
Connections Connecting the Antenna Input Jack Connection Procedures LINE INPUT S-VIDEO VIDEO L - AUDIO - R ANTENNA INPUT RF Cable VCR To TV ANT Channel 12 Connect the antenna cable to the ANTENNA IN terminal on the back of the VCR. Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. To watch a video with a VCR (RF Connection) Set the channel select switch on the back of TV 3 the VCR to 3 or 4. Change the TV channel to 3 or 4 according to your
ページ17に含まれる内容の要旨
Connections Connecting a DTV Receiver Connection Procedures COMPONENT/HD INPUT Y Pb Pr L - AUDIO - R DTV Receiver ANT L - AUDIO - R Y Pb Pr Connect the COMPONENT/HD INPUT jack on the TV and the component video output jack of your DTV receiver with the component video connectors (Y, Pb, and Pr). Connect the left and right COMPONENT/HD AUDIO INPUT jacks of the TV to the component audio output jack of the DTV receiver using the audio cables. To watc
ページ18に含まれる内容の要旨
Connections Connecting an STB Receiver Connection Procedures LINE INPUT PHONES S-VIDEO VIDEO L - AUDIO - R STB Receiver To TV ANT S-VIDEO VIDEO L - AUDIO - R Connect your STB receiver antenna cable to the antenna signal input jack on the STB receiver tuner. Connect the VIDEO/AUDIO INPUT jack of the TV and the video/audio output jack of the STB receiver with the video/audio cables. To watch the STB Receiver Turn the TV on and select ‘VIDEO’ using the LINE VIDEO button on the remote control. Turn
ページ19に含まれる内容の要旨
Connections Connecting a CATV Receiver Connection Procedures LINE INPUT PHONES S-VIDEO VIDEO L - AUDIO - R CATV Receiver To TV ANT VIDEO L - AUDIO - R Connect the cable TV antenna cable to the antenna input jack of the cable TV receiver. Connect the VIDEO/AUDIO INPUT jack of the TV and the video/audio output jack of the cable TV receiver using the video/audio cables (connect the cables to the terminals of the same color). To watch Cable TV (A/V Connection) Turn the TV on, and select 'VIDEO' usin
ページ20に含まれる内容の要旨
Connections Connecting the Antenna Input Jack Connection Procedures LINE INPUT S-VIDEO VIDEO L - AUDIO - R ANTENNA INPUT Channel 34 CATV Receiver To TV ANT VIDEO L - AUDIO - R Connect the cable TV antenna cable to the ANTENNA IN jack on the back of the cable TV receiver. Connect a coaxial cable between the ANTENNA INPUT jack of the TV and the antenna output jack of the cable TV receiver. To watch Cable TV (RF Connection) Set the channel select switch on the back of the cable TV 3 TV receiver to
